A fast-locking, low-jitter, phase-locked loop （PLL） with a simple phase-frequency detector is proposed. The phase-frequency detector is composed of only two XOR gates. It simultaneously achieves low jitter and short...A fast-locking, low-jitter, phase-locked loop （PLL） with a simple phase-frequency detector is proposed. The phase-frequency detector is composed of only two XOR gates. It simultaneously achieves low jitter and short locking time. The voltage-controlled oscillator within the PLL consists of four-stage ring oscillators which are coupled to each other and oscillate with the same frequency and a phase shift of 45. The PLL is fabricated in 0. 1Stem CMOS technology. The measured phase noise of the PLL output at 500kHz offset from the 5GHz center frequency is - 102.6dBc/Hz. The circuit exhibits a capture range of 280MHz and a low RMS jitter of 2.06ps. The power dissipation excluding the output buffers is only 21.6roW at a 1.8V supply.展开更多
A low jitter phase-locked loop （PLL） that does not need analog resistors and capacitors is designed and fabrica- ted in a 90nm CMOS digital process. The metal parasitic capacitor is used in the PLL loop filter. Test...A low jitter phase-locked loop （PLL） that does not need analog resistors and capacitors is designed and fabrica- ted in a 90nm CMOS digital process. The metal parasitic capacitor is used in the PLL loop filter. Test results show that when the PLL is locked on 1. 989GHz, the RMS jitter is 3. 7977ps, the peak-to-peak jitter is 31. 225ps, and the power con- sumption is about 9mW. The locked output frequency range is from 125MHz to 2.7GHz.展开更多
A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency de...A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency detector （PFD） is used in the PLL. The rms jitter of the recovered 2.5GHz clock is 2.4ps and the SSB phase noise is - 111dBc/Hz at 10kHz offset. The rms jitter of the recovered 2.5Gb/s data is 3.3ps. The power consumption is 120mW.展开更多
本文提出了一个具有自调谐,自适应功能的1.9GHz的分数/整数锁相环频率综合器.该频率综合器采用模拟调谐和数字调谐相结合的技术来提高相位噪声性能.自适应环路被用来实现带宽自动调整,可以缩短环路的建立时间.通过打开或者关断ΣΔ调制...本文提出了一个具有自调谐,自适应功能的1.9GHz的分数/整数锁相环频率综合器.该频率综合器采用模拟调谐和数字调谐相结合的技术来提高相位噪声性能.自适应环路被用来实现带宽自动调整,可以缩短环路的建立时间.通过打开或者关断ΣΔ调制器的输出来实现分数和整数分频两种工作模式,仅用一个可编程计数器实现吞脉冲分频器的功能.采用偏置滤波技术以及差分电感,在片压控振荡器具有很低的相位噪声;通过采用开关电容阵列,该压控振荡器可以工作在1.7GHz^2.1GHz的调谐范围.该频率综合器采用0.18μm,1.8VSM IC CMOS工艺实现.SpectreVerilog仿真表明:该频率综合器的环路带宽约为100kHz,在600kHz处的相位噪声优于-123dBc/Hz,具有小于15μs的锁定时间.展开更多
In order to make a 10 Gbit/s 2：1 half-rate multiplexer operate without external clocks, a 5 Gbit/s clock recovery （CR） circuit is needed to extract the desired clock from one input data. For the CR circuit, a 3-sta...In order to make a 10 Gbit/s 2：1 half-rate multiplexer operate without external clocks, a 5 Gbit/s clock recovery （CR） circuit is needed to extract the desired clock from one input data. For the CR circuit, a 3-stage ring voltage-controlled oscillator （VCO） is employed to avoid an unreliable startup of a 2-stage VCO and a low oscillation frequency of a 4-stage VCO. A phase frequency detector （PFD） is used to expand the pull-in range to meet the wide tuning range of a VCO required by process-voltage-temperature （PVT） variation. SMIC 0. 18-μm CMOS technology is adopted and the core area is 170 μm ×270 μm. Measurements show that, under a 1.8 V supply voltage, it consumes only about 90 mW, and has an input sensitivity of less than 25 mV, an output single-ended swing of above 300 mV, a phase noise of - 114 dBc/Hz at 1 MHz offset and a pull-in range of 1 GHz.展开更多
In order to improve the performance of the existing phase frequency detectors （PFDs）, a systematical analysis of the existing PFDs is presented. Based on the circuit architecture, both classifications and comparison...In order to improve the performance of the existing phase frequency detectors （PFDs）, a systematical analysis of the existing PFDs is presented. Based on the circuit architecture, both classifications and comparisons are made. A new robust CMOS phase frequency detector for a high speed and low jitter charge pump phrase-locked loop （PLL） is designed. The proposed PFD consists of two rising-edge triggered dynamic D flip-flops, two positive-edge detectors and delaying units and two OR gates. It adopts two reset mechanisms to avoid the LIP and DN signals to be logic-1 simultaneously. Thus, any current mismatch of the charge pump circuit will not worsen the performance of the PLL. Furthermore, it has hardly any dead-zone phenomenon in phase characteristic. Simulations with ADS are performed based on a TSMC 0. 18-μm CMOS process with a 1.8-V supply voltage. According to the theoretical analyses and simulation results, the proposed PFD shows a satisfactory performance with a high operation frequency （≈ 1 GHz）, a wide phase-detection range [ ± 2π], a near zero dead-zone （ 〈 0. 1 ps）, high reliability, low phase jitter, low power consumption （ ≈100 μW） and small circuit complexity.展开更多
A novel method to partially compensate sigma-delta shaped noise is proposed. By injecting the compensation current into the passive loop filter during the delay time of the phase frequency detector（PFD）,a maximum re...A novel method to partially compensate sigma-delta shaped noise is proposed. By injecting the compensation current into the passive loop filter during the delay time of the phase frequency detector（PFD）,a maximum reduction of the phase noise by about 16dB can be achieved. Compared to other compensation methods,the technique proposed here is relatively simple and easy to implement. Key building blocks for realizing the noise cancellation,including the delay variable PFD and compensation current source, are specially designed. Both the behavior level and circuit level simulation results are presented.展开更多
Based on 0.13μm complementary metal-oxide-semiconductor（CMOS） technology,a phase and frequency detector（PFD） is designed with a low supply voltage of 0.5V for frequency synthesizers used in wireless sensor netwo...Based on 0.13μm complementary metal-oxide-semiconductor（CMOS） technology,a phase and frequency detector（PFD） is designed with a low supply voltage of 0.5V for frequency synthesizers used in wireless sensor networks（WSNs）.The PFD can compare the frequency and phase differences of input signals and deliver a signal voltage proportional to the difference.Low threshold transistors are used in the circuits since a power supply of 0.5V is adopted.A pulse latched structure is also used in the circuits in order to increase both the detection range of phase errors and the maximum operation frequency.In experiments,a phase error with a range from-358° to 358° is measured when the input signal frequency is 2MHz.The PFD has a faster acquisition speed compared with conventional digital PFDs.When the input signals are at a frequency of 2MHz with zero phase error,the circuits have a power consumption of 1.8[KG＊8]μW,and the maximum operation frequency is 1.25GHz.展开更多
文摘A fast-locking, low-jitter, phase-locked loop （PLL） with a simple phase-frequency detector is proposed. The phase-frequency detector is composed of only two XOR gates. It simultaneously achieves low jitter and short locking time. The voltage-controlled oscillator within the PLL consists of four-stage ring oscillators which are coupled to each other and oscillate with the same frequency and a phase shift of 45. The PLL is fabricated in 0. 1Stem CMOS technology. The measured phase noise of the PLL output at 500kHz offset from the 5GHz center frequency is - 102.6dBc/Hz. The circuit exhibits a capture range of 280MHz and a low RMS jitter of 2.06ps. The power dissipation excluding the output buffers is only 21.6roW at a 1.8V supply.
文摘A low jitter phase-locked loop （PLL） that does not need analog resistors and capacitors is designed and fabrica- ted in a 90nm CMOS digital process. The metal parasitic capacitor is used in the PLL loop filter. Test results show that when the PLL is locked on 1. 989GHz, the RMS jitter is 3. 7977ps, the peak-to-peak jitter is 31. 225ps, and the power con- sumption is about 9mW. The locked output frequency range is from 125MHz to 2.7GHz.
文摘A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency detector （PFD） is used in the PLL. The rms jitter of the recovered 2.5GHz clock is 2.4ps and the SSB phase noise is - 111dBc/Hz at 10kHz offset. The rms jitter of the recovered 2.5Gb/s data is 3.3ps. The power consumption is 120mW.
文摘本文提出了一个具有自调谐,自适应功能的1.9GHz的分数/整数锁相环频率综合器.该频率综合器采用模拟调谐和数字调谐相结合的技术来提高相位噪声性能.自适应环路被用来实现带宽自动调整,可以缩短环路的建立时间.通过打开或者关断ΣΔ调制器的输出来实现分数和整数分频两种工作模式,仅用一个可编程计数器实现吞脉冲分频器的功能.采用偏置滤波技术以及差分电感,在片压控振荡器具有很低的相位噪声;通过采用开关电容阵列,该压控振荡器可以工作在1.7GHz^2.1GHz的调谐范围.该频率综合器采用0.18μm,1.8VSM IC CMOS工艺实现.SpectreVerilog仿真表明:该频率综合器的环路带宽约为100kHz,在600kHz处的相位噪声优于-123dBc/Hz,具有小于15μs的锁定时间.
基金The National High Technology Research and Development Program of China (863 Program)(No. 2007AA01Z2a5)the National Natural Science Foundation of China (No. 60806027,61076073)Specialized Research Fund for the Doctoral Program of Higher Education (No.20090092120012)
文摘In order to make a 10 Gbit/s 2：1 half-rate multiplexer operate without external clocks, a 5 Gbit/s clock recovery （CR） circuit is needed to extract the desired clock from one input data. For the CR circuit, a 3-stage ring voltage-controlled oscillator （VCO） is employed to avoid an unreliable startup of a 2-stage VCO and a low oscillation frequency of a 4-stage VCO. A phase frequency detector （PFD） is used to expand the pull-in range to meet the wide tuning range of a VCO required by process-voltage-temperature （PVT） variation. SMIC 0. 18-μm CMOS technology is adopted and the core area is 170 μm ×270 μm. Measurements show that, under a 1.8 V supply voltage, it consumes only about 90 mW, and has an input sensitivity of less than 25 mV, an output single-ended swing of above 300 mV, a phase noise of - 114 dBc/Hz at 1 MHz offset and a pull-in range of 1 GHz.
文摘In order to improve the performance of the existing phase frequency detectors （PFDs）, a systematical analysis of the existing PFDs is presented. Based on the circuit architecture, both classifications and comparisons are made. A new robust CMOS phase frequency detector for a high speed and low jitter charge pump phrase-locked loop （PLL） is designed. The proposed PFD consists of two rising-edge triggered dynamic D flip-flops, two positive-edge detectors and delaying units and two OR gates. It adopts two reset mechanisms to avoid the LIP and DN signals to be logic-1 simultaneously. Thus, any current mismatch of the charge pump circuit will not worsen the performance of the PLL. Furthermore, it has hardly any dead-zone phenomenon in phase characteristic. Simulations with ADS are performed based on a TSMC 0. 18-μm CMOS process with a 1.8-V supply voltage. According to the theoretical analyses and simulation results, the proposed PFD shows a satisfactory performance with a high operation frequency （≈ 1 GHz）, a wide phase-detection range [ ± 2π], a near zero dead-zone （ 〈 0. 1 ps）, high reliability, low phase jitter, low power consumption （ ≈100 μW） and small circuit complexity.
文摘A novel method to partially compensate sigma-delta shaped noise is proposed. By injecting the compensation current into the passive loop filter during the delay time of the phase frequency detector（PFD）,a maximum reduction of the phase noise by about 16dB can be achieved. Compared to other compensation methods,the technique proposed here is relatively simple and easy to implement. Key building blocks for realizing the noise cancellation,including the delay variable PFD and compensation current source, are specially designed. Both the behavior level and circuit level simulation results are presented.
基金The National High Technology Research and Development Program of China (863 Program) (No. 2007AA01Z2A7)Program for Special Talents in Six Fields of Jiangsu Province
文摘Based on 0.13μm complementary metal-oxide-semiconductor（CMOS） technology,a phase and frequency detector（PFD） is designed with a low supply voltage of 0.5V for frequency synthesizers used in wireless sensor networks（WSNs）.The PFD can compare the frequency and phase differences of input signals and deliver a signal voltage proportional to the difference.Low threshold transistors are used in the circuits since a power supply of 0.5V is adopted.A pulse latched structure is also used in the circuits in order to increase both the detection range of phase errors and the maximum operation frequency.In experiments,a phase error with a range from-358° to 358° is measured when the input signal frequency is 2MHz.The PFD has a faster acquisition speed compared with conventional digital PFDs.When the input signals are at a frequency of 2MHz with zero phase error,the circuits have a power consumption of 1.8[KG＊8]μW,and the maximum operation frequency is 1.25GHz.
