Prediction of the thermo-elastic properties of knitted structural composites using FEM

It is a very important and complex task to estimate the thermo-elasticproperties of a textile structural composite. In this paper, the finite element method (FEM) wasused for the prediction of the orthotropic thermo-elastic properties of a composite reinforced byglass fiber knitted fabric. In order to define the final 3-D configuration of the loop reinforcingstructure, the interactions between the adjacent loops, the large displacement and the contactelements without friction were considered. The values predicted were compared with the experimentalresults.

Study on How to Design Knitted Fabric Pattern with Mathematical Theory

To improve design capabilities for the knitted fabric pattern,a preliminary study is carried out for the design method.Based on mathematical theory,pattern could be created automatically by computer with inputting different parameters for mathematical functions.The knitted fabric simulation is realized by M1 CAD pattern preparation system of STOLL Company.In the pattern,different color unit is replaced by obverse stitch with different color,or by obverse stitch and reverse stitch with the same color separately,after that the effects of knitted fabrics could be simulated.Designing with this method,it would not only help to acquire a great of diversity patterns,but also improve design efficiency and save cost.

Mechanical Properties of Small-diameter Superfine Silk Powder/Polyurethane Vascular Graft Reinforced by Tubular Knitted Fabric

In this paper,a kind of composite microtube,which is made from superfine silk powder and polyurethane,reinforced by polyster and spandex tubular fabrics,was examined.The cross-section of composite microtubes were microporous,and micropores were uniform distributed,the inner surface was relatively smooth.The results showed that the wall thickness of composite microtubes increased,which led to the strength,the breaking work and the initial modulus incresead;that the spandex content increased brought about the initial modulus and the breaking work decreased,but the breaking extension and the breaking load were firstly increased and then decreased;and all the mechanical properties decreased as the SFSP content increased.

Evaluation on Pipao＇ s Construction Comfort by Fuzzy Theory

Comfort is one of the most important attributes demanded by bra consumers. It reflects the psychological feeling of a wearer.Different kinds of knitted fabric are chosen as bra samples in this paper. This subject studied the bra＇s comfort sensations by carrying out a series of subjective wear at temperature at 21± 2℃ and humidity of 65±3%. By exploratory analysis of the subjective ratings on 3 mainly sensory factors （thermal, moisture and tightness）, the relationships between 3 factors are studied under three conditions, before, during and after movement. This study is focused on subjective evaluation ofbra＇ s comfort sensations of made of different knitted fabrics. Finally, based on fuzzy theory, the comprehensive comfort sensations of these fabrics in different wear conditions are analyzed and evaluated.

Pressure Reduction of Spacer Fabrics

The properties of the warp knitted spacer fabrics for pressure reduction are experimentally investigated and compared to other materials.The influences of the different parameters, such as thickness, spacer yarn diameter and connecting form are also analyzed and discussed. The results have shown that the spacer fabrics have very good properties for pressure reduction when they are used as soles, mattress or cushions.

Microstructural evaluation of Hastelloy-X transient liquid phase bonded joints:Effects of filler metal thickness and holding time

Transient liquid phase(TLP)bonding was investigated in Hastelloy-X samples with different filler metal thicknesses(20,35,50,65,and 100μm)and holding time(5,20,80,320,and 640 min)to obtain optimum bonding parameters.Microstructural evaluations using electron probe microanalysis(EPMA)and electron backscattered diffraction(EBSD)show that the central eutectic phases present in the athermally solidified zone(ASZ)are Ni_(3)B,Ni_(2)Si,and CrB,and the precipitates formed in the diffusion-affected zone(DAZ)are MoB,CrB_(2),and Mo_(2)B_(5).According to the results,decreasing the filler thickness as well as increasing the holding time helps realize the completion of isothermal solidification and reduction in the density of precipitates in the DAZ,leading to a joint with more uniform properties.Diffusion of boron and silicon to longer distances with increasing holding time causes the removal of Cr-rich borides in the DAZ and the formation of Mo-rich silicide at the joint interface.Decrease in hardness of ASZ and DAZ due to the elimination of brittle phases in these zones during long holding time causes more uniform hardness distribution in the joint area.The best results are obtained for the sample joined with the 35μm-thick filler metal for 640 min holding time.