期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
常温常压下盐酸浸出分离钒钛磁铁精矿中有价金属的试验研究
1
作者 徐国印 王普蓉 +1 位作者 张翠平 马兰 《中国有色冶金》 CAS 北大核心 2024年第6期13-18,共6页
攀西钒钛磁铁矿组成及矿物结构复杂,难以低成本、高效综合利用其中的有价元素。针对此问题,本文采用常温常压盐酸浸出的方法对该矿物进行了试验探索,考察了盐酸初始质量浓度、浸出液固比、浸出时间、浸出搅拌转速率等主要因素对Fe、TiO_... 攀西钒钛磁铁矿组成及矿物结构复杂,难以低成本、高效综合利用其中的有价元素。针对此问题,本文采用常温常压盐酸浸出的方法对该矿物进行了试验探索,考察了盐酸初始质量浓度、浸出液固比、浸出时间、浸出搅拌转速率等主要因素对Fe、TiO_(2)和V_(2)O_(5)浸出率的影响,并通过矿物结构分析了钒钛磁铁精矿中铁、钒、钛分离的机理,得到以下主要结论。盐酸常温常压浸出的较佳工艺条件为盐酸初始浓度20.5%、浸出液固比12:1、浸出时间3.5 h、浸出搅拌转速率600 r/min,该条件下Fe、V_(2)O_(5)和TiO_(2)浸出率分别为84.15%、80.80%、10.05%,浸渣中Fe、V_(2)O_(5)和TiO_(2)品位分别为26.78%、0.378%和32.58%,实现了钛资源的初步富集;盐酸优先溶解试样中钛磁铁矿矿物的主晶矿物磁铁矿,铁、钒优先进入浸出液,而客晶矿钛铁矿及独立钛铁矿被破坏程度极小,富集于浸渣中;该浸出方法不需要额外的加热和加压设备,具有成本低、能源消耗和设备投资较低、操作简便、环境友好的优势,但浸出指标有待提高,后续需要进一步探索催化剂对常温常压酸浸工艺的影响。 展开更多
关键词 磁铁矿 铁、分离 盐酸浸出 常温常压 矿物结构 催化剂
下载PDF
还原钒钛磁铁矿磁选尾渣钒钛分离试验
2
作者 罗林根 庞建明 +5 位作者 宋耀欣 赵志民 高延恒 林银河 张鹤雄 郑权 《钢铁》 CAS CSCD 北大核心 2024年第10期39-44,共6页
针对攀枝花米易某选厂钒钛磁铁矿的特点,拟采用新工艺实现钒钛磁铁矿中Fe、V、Ti高效分离和回收利用。主要工艺过程为钒钛磁铁矿采用氢气还原制备得到还原后的钒钛磁铁矿,经细磨和湿式磁选分离金属铁粉,实现Fe和V、Ti的分离;在固相条件... 针对攀枝花米易某选厂钒钛磁铁矿的特点,拟采用新工艺实现钒钛磁铁矿中Fe、V、Ti高效分离和回收利用。主要工艺过程为钒钛磁铁矿采用氢气还原制备得到还原后的钒钛磁铁矿,经细磨和湿式磁选分离金属铁粉,实现Fe和V、Ti的分离;在固相条件下,经氢气还原后钒钛磁铁矿中的V、Ti大部分富集在非磁性的尾渣中。以还原钒钛磁铁矿磁选分离金属铁后的尾渣为对象,结合湿法冶金和选矿工艺实现磁选尾渣的钒钛分离,具体开展了钠化氧化焙烧的工艺分离提取钒和摇床重选提钒尾渣富集钛试验研究。试验表明,该工艺可以有效地分离提取V和Ti。在磁选尾渣加入质量分数为7%的Na_(2)CO_(3)添加剂,850℃温度条件下进行钠化氧化焙烧-水浸,钒收率最高可达84.12%;采用3级循环水浸,可制得钒质量浓度为22 g/L的钒溶液,经酸性铵盐沉钒工艺制得的V_(2)O_(5)纯度(质量分数)为98.30%。通过控制摇床冲水量5 L/min可得到产率为41.62%,TiO_(2)品位为75.18%含钛精矿钛收率可达78.54%。磁选还原钒钛磁铁矿分离可提取金属铁粉,实现了铁的回收。提出的钒钛磁铁矿综合利用工艺方案有望实现攀西钒钛磁铁矿铁、钒、钛资源综合利用,该方案可进一步开展更大规模试验研究。 展开更多
关键词 钒钛分离 钠化焙烧 酸性铵盐沉 磁铁矿综合利用 重选 磁选
原文传递
Three-liquid-phase extraction and separation of V(V) and Cr(VI) from acidic leach solutions of high-chromium vanadium–titanium magnetite 被引量:5
3
作者 Pan Sun Kun Huang +4 位作者 Xiaoqin Wang Na Sui Jieyuan Lin Wenjuan Cao Huizhou Liu 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2018年第7期1451-1457,共7页
A new method by liquid-liquid-liquid three phase system, consisting of acidified primary amine N1923 (abbreviated as A-N1923), poly(ethylene glycol) (PEG) and (NH4)2S04 aqueous solution, was suggested for the ... A new method by liquid-liquid-liquid three phase system, consisting of acidified primary amine N1923 (abbreviated as A-N1923), poly(ethylene glycol) (PEG) and (NH4)2S04 aqueous solution, was suggested for the separation and simultaneous extraction of Ⅴ(Ⅴ) and Cr(Ⅵ) from the acidic leach solutions of high- chromium vanadium-titanium magnetite. Experimental results indicated that Ⅴ(Ⅴ) and Cr(Ⅵ) could be selectively enriched into the A-N1923 organic top phase and PEG-rich middle phase, respectively, while AI(Ⅲ) and other co-existing impurity ions, such as Si(Ⅳ), Fe(Ⅲ), Ti(Ⅳ), Mg(Ⅱ) and Ca(Ⅱ) in acidic leach solutions, could be enriched in the (NH4)2SO4 bottom aqueous phase. During the process for extraction and separation of Ⅴ(Ⅴ) and Cr(Ⅵ), almost all of impurity ions could be removed. The separation factors between Ⅴ (Ⅴ) and Cr(Ⅵ) could reach 630 and 908, respectively in the organic top phase and PEG middle phase, and yields of recovered Ⅴ(Ⅴ) and Cr(Ⅵ) in the top phase and middle phase respectively were all above 90%. Various effects including aqueous pH, A-N1923 concentration, PEG added amount and (NH4)2SO4 concentration on three-phase partitioning of Ⅴ(Ⅴ) and Cr(Ⅵ) were discussed. It was found that the partition of Cr(Ⅵ) into the PEG-rich middle phase was driven by hydrophobic interaction, while extraction of Ⅴ(Ⅴ) by A-N1923 resulted of anion exchange between NO; and H2V10O4-28. Stripping of Ⅴ(Ⅴ) and Cr(Ⅵ) from the top organic phase and the middle PEG-rich phase were achieved by mixing respectively with NANO3 aqueous solutions and NaOH-(NH4)2SO4 solutions. The present work highlights a new approach for the extraction and purification of V and Cr from the complex multi-metal co-existing acidic leach solutions of high-chromium vanadium-titanium magnetite. 展开更多
关键词 Three-liquid-phase extraction VANADIUM CHROMIUM Separation High-chromium vanadium-titanium magnetite
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部