钙-磷基生物陶瓷材料的研究

本项研究提供了制取生物活性钙-磷基生物陶瓷材料的重要方法。对比人体骨分析了这种材料的相结构。检测了这种材料的力学性能,研究和讨论了成份和成材工艺条件对材料相结构、微观组织及抗弯,抗压强度等诸因素的作用。并对该材料进行了部分实验和动物实验,以考核该材料的生物学特性。

Microstructure and properties of biodegradable β-TCP reinforced Mg-Zn-Zr composites

Magnesium alloys have good biocompatibility, but their mechanical properties and corrosion resistance may not be satisfied for using as degradable materials within bone due to its high corrosion rate in the physiological environment. Nano β-TCP particles were added into Mg-Zn-Zr alloy to improve its microstructure and the properties. As-extruded Mg-3Zn-0.8Zr alloy and Mg-3Zn-0.8Zr/xβ-TCP （x=0.5%, 1.0% and 1.5%） composites were respectively fabricated. The grains of Mg-Zn-Zr/β-TCP composites were significantly refined. The results of the tensile tests indicate that the ultimate tensile strength and the elongation of composites were improved with the addition of β-TCP. The electrochemical test result in simulation body fluid shows that the corrosion resistance of the composites was strongly enhanced comparing with that of the alloy. The corrosion potential of Mg-3Zn0.8-Zr/1.0β-TCP composite is 1.547 V and its corrosion current density is 1.20×10 6 A/cm 2 .

Effects of electrolytic concentration on properties of micro-arc film on Ti6Al4V alloy

To study the effect of electrolytic concentration,bioactive ceramic films containing Ca and P on the surface of the Ti6Al4V alloy were prepared by micro-arc oxidation(MAO) in aqueous solutions of different concentrations.Composition,micro-morphology,wettability of the films and their corrosion behavior in a Hank's SBF were studied.Our experimental results show that the film is mainly composed of anatase,rutile and amorphous phases.With an increase in electrolytic concentration,the ratio of rutile in films enlarge and small amounts of calcium phosphate(Ca3(PO4)2) and hydroxyapatite(HA) appear.The number of micropores in films increases but their dimensions decrease and their porosities increase slightly.As the surface roughness of MAO film increases with concentration,the wettablility of the oxide film improves continually,while micro-hardness increases at first and then decreases.MAO treatment clearly improves the corrosion resistance of substrates in a Hank's SBF.

In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite

Fluorine-doped hydroxyapatite(FHA) and calcium deficient hydroxyapatite(CDHA) were coated on the surface biodegradable magnesium alloy using electrochemical deposition(ED) technique. Coating characterization was investigated X-ray diffraction(XRD), Fourier-transformed infrared spectroscopy(FTIR), transmission electron microscopy(TEM), scanni electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDS). The result shows that nano-FHA coated samp presents nano needle-like structure, which is oriented perpendicular to the surface of the substrate with denser and more unifo layers compared to the nano-CDHA coated sample. The nano-FHA coating shows smaller crystallite size(65 nm) compared to t nano-CDHA coating(95 nm); however, CDHA presents thicker layer(19 μm in thickness) compared to the nano-FHA(15 μm thickness). The corrosion behaviour determined by polarization, immersion and hydrogen evolution tests indicates that the nano-FH and nano-CDHA coatings significantly decrease corrosion rate and induce passivation. The nano-FHA and nano-CDHA coatings c accelerate the formation of bone-like apatite layer and significantly decrease the dissolution rate as compared to the uncoated M alloy. The nano-FHA coating provides effective protection to Mg alloy and presents the highest corrosion resistance. Therefore, t nano-FHA coating on Mg alloy is suggested as a great candidate for orthopaedic applications.

Synthesis of Crystalline Hydroxyapatite from CaCO_3 and CaHPO_4·2H_2O by Mechanochemical Method

The mixture of CaHPO 4·2H 2O and CaCO 3 was ground in an aqueous system under appropriate conditions to investigate the mechanochemical reaction for the synthesis of crystalline hydroxyapatite (HA) powder. Hydroxyapatite of high crystallinity powder including trace Ca 10 (PO 4) 6CO 3(OH) and Ca 9HPO 4(PO 4) 6OH can be synthesized by mechanical activation without further thermal treatment at a high temperature. The synthesis reaction during the grinding process was almost completed within 1h. The as-ground powder exhibits a particle distribution of 20-100nm in size with a spherical or rodlike morphology. The composition and degree of crystallinity of the mechanochemical synthesized hydroxyapatite powders were coincident with the cement-type hydroxyapatite.

Interaction of NPK Fertilizers During Their Transformation in Soils: Ⅲ. Transformations of Monocalcium Phosphate

Interactions of N, P and K fertilizers in soil-plant systems are widelyrecognized. This study focused on the transformations of monocalcium phosphate (Ca(H_2PO_4)_2) (MCP)with co-application of ammonium and potassium fertilizers in three different soils. The resultsshowed that after 1 d incubation a large portion of the MCP applied in the paddy, calcareous and redsoils became the water-insoluble form and the recoveries of P applied as Olsen P varied greatly inthese three soils. Application of ammonium sulfate ((NH_4)_2SO_4) (AS) or potassium chloride (KCl)reduced WSP significantly the soils with AS more effective than KCl in the calcareous soil, whilethe reverse occurred in the red soil. Meanwhile, in the paddy soil, co-application of the twofertilizers reduced WSP more than when the fertilizers were applied individually. The co-applicationof AS with MCP in the paddy and calcareous soils significantly reduced Olsen P, but the oppositeoccurred in the red soil. The experiment on the effect of different accompanying anions showed thatthe ammonium fertilizers (PNCl and PNS) reduced WSP more effectively than the correspondingpotassium fertilizers (PKCl and PKS) in the calcareous soil due to the difference of the cations,whereas in the red soil, the chlorides reduced WSP more effectively than the sulfates. Overall,co-application of ammonium or potassium fertilizers with MCP significantly decreased availability ofP from MCP during its transformation in soils, especially when MCP was applied in combination withammonium in the calcareous soil.

Preparation and degradation characteristic study of bone repair composite of DL-polylactic acid/hydroxyapatite/decalcifying bone matrix

To explore the preparative method an d study the degradation characteristics of bone repair composite of DL polylac tic acid (PDLLA)/hydroxyapatite(HA)/decalcifying bone matrix (DBM) in vitro. Methods: An emulsion blend method was developed to prepare the composite of PDLLA/HA/DBM in weight ratio of PDLLA:HA:DBM= 1.5 2 : 1 1.5 : 1. The dynamic changes of weight, biomechanical property and pH value of PDLLA/ HA/DBM and PDLLA in phosphate buffered saline (PBS, pH 7.4 ) were studied re spectively through degradation tests in vitro. Results: Without being heated, PDLLA, HA and DBM could be synt hesized with the emulsion blend method as bone composite of PDLLA/HA/DBM, which had both osteoconductive and osteoinductive effects. The diameter of the apertu re was 100 400 μm and the gap rate was 71.3 %. During degradation, the pH v alue of PDLLA solution decreased lightly within 2 weeks, but decreased obviously at the end of 4 weeks and the value was 4.0 . While the pH value of PDLLA/H A/DBM kept quite steady and was 6.4 at the end of 12 weeks. The weight of PDLLA changed little within 4 weeks, then changed obviously and was 50% of its initia l weight at the end of 12 weeks. While the weight of PDLLA/HA/DBM changed little within 5 weeks, then changed obviously and was 60% of the initial weight at the end of 12 weeks. The initial biomechanical strength of PDLLA was 1.33 MPa, decreased little within 3 weeks, then changed obviously and kept at 0.11 MP a at the end of 12 weeks. The initial biomechanical strength of PDLLA/HA/DBM was 1.7 MPa, decreased little within 4 weeks, then changed obviously and kept at 0.21 MPa at the end of 12 weeks. Conclusions: The emulsion blend method is a new method to prepa re bone repair materials. As a new bone repair material, PDLLA/HA/DBM is more su itable for regeneration and cell implantation, and the environment during its de gradation is advantageous to the growth of bone cells.

A facile approach to construct hybrid multi-shell calcium phosphate gene particles

The calcium phosphate (CaP) particles have attracted much attention in gene therapy. How to construct stable gene particles was the determining factor. In this study,hybrid multi-shell CaP gene particles were successfully constructed. First,CaP nanoparticles served as a core and were coated with DNA for colloidal stabilization. The ξ-potential of DNA-coated CaP nanoparticles was -15 mV. Then polyethylenimine (PEI) was added and adsorbed outside of the DNA layer due to the electrostatic attraction. The ξ-potential of hybrid multi-shell CaP particles was slightly positive. With addition of PEI,the hybrid multi-shell particles could condense DNA effectively,which was de-termined by ethidium bromide (EtBr) exclusion assay. The hybrid particles were spherical and uniform with diameters of about 150 nm at proper conditions. By simple modification of PEI,the hybrid multi-shell CaP gene particles were successfully constructed. They may have great potential in gene therapy.

Biocompatibility of nano-hydroxyapatite/Mg-Zn-Ca alloy composite scaffolds to human umbilical cord mesenchymal stem cells from Wharton's jelly in vitro

Seeding cells and scaffolds play pivotal roles in bone tissue engineering and regenerative medicine.Wharton’s jelly-derived mesenchymal stem cells(WJCs)from human umbilical cord represent attractive and promising seeding cells in tissue regeneration and engineering for treatment applications.This study was carried out to explore the biocompatibility of scaffolds to seeding cells in vitro.Rod-like nano-hydroxyapatite(RN-HA)and flake-like micro-hydroxyapatite(FM-HA)coatings were prepared on Mg-Zn-Ca alloy substrates using micro-arc oxidation and electrochemical deposition.WJCs were utilized to investigate the cellular biocompatibility of Mg-Zn-Ca alloys after different surface modifications by observing the cell adhesion,morphology,proliferation,and osteoblastic differentiation.The in vitro results indicated that the RN-HA coating group was more suitable for cell proliferation and cell osteoblastic differentiation than the FM-HA group,demonstrating better biocompatibility.Our results suggested that the RN-HA coating on Mg-Zn-Ca alloy substrates might be of great potential in bone tissue engineering.

Differential expression of salt tolerance related genes in Brassica campestris L. ssp. chinensis (L.) Makino var. communis Tsen et Lee

We examined salt tolerance responsive genes in Pak-choi under salt stress and analyze their potential function. The LRNA differential display was used to screen the transcript derived fragments （TDFs） related to salinity tolerance in tolerant and Loderately tolerant Pak-choi germplasm. Seventy-eight primer combinations generated 101 differential eDNA fragments, which ere divided into 10 expression types. Seven cDNA sequences （GenBank accession Nos. DQ006915-DQ006921） obtained and ,~quenced were highly homologous to some known expression genes or the genes related to the signaling pathways in plants under ifferent abiotic stress.