Different mass fractions （0, 5%, 10%, and 15%） of the synthesized nano SiC particles reinforced Ti-6Al-4V （Ti64） alloy metal matrix composites （MMCs） were successfully fabricated by the powder metallurgy method....Different mass fractions （0, 5%, 10%, and 15%） of the synthesized nano SiC particles reinforced Ti-6Al-4V （Ti64） alloy metal matrix composites （MMCs） were successfully fabricated by the powder metallurgy method. The effects of addition of SiC particle on the mechanical properties of the composites such as hardness and compressive strength were investigated. The optimum density （93.33%） was obtained at the compaction pressure of 6.035 MPa. Scanning electron microscopic （SEM） observations of the microstructures revealed that the wettability and the bonding force were improved in Ti64 alloy/5% nano SiCp composites. The effect of nano SiCp content in Ti64 alloy/SiCp matrix composite on phase formation was investigated by X-ray diffraction. The correlation between mechanical parameter and phase formation was analyzed. The new phase of brittle interfaced reaction formed in the 10% and 15% SiCp composite specimens and resulted in no beneficial effect on the strength and hardness. The compressive strength and hardness of Ti64 alloy/5% nano SiCp MMCs showed higher values. Hence, 5% SiCp can be considered to be the optimal replacement content for the composite.展开更多
Photodynamic therapy （PDT） is one of the latest biomedical technologies used for treatment of various neoplastic and non-neoplastic diseases. However, there still exist some well-known problems regarding its efficac...Photodynamic therapy （PDT） is one of the latest biomedical technologies used for treatment of various neoplastic and non-neoplastic diseases. However, there still exist some well-known problems regarding its efficacy, e.g. effective concentra- tion of the drug at the desired sites, the irradiation light dosimetry and biocompatibility of the photosensitizer. The introduction of nanotechnology and nanomaterial like biocompatible nano-titania （i.e., nano-TiO2） may facilitate to solve some of these problems. In this study we have explored the possibility of combining tetra sulphonatophenyl porphyrin （TSPP） with nano-titania （PT） for efficient PDT with least adverse effects. The spectroscopic properties of these nano-cornposites were characterized by using fluorescence and UV-Vis absorption spectroscopic study. The singlet oxygen quantum yield was deter- mined by using 2,5-diphenyl-3,4-benzofuran （DPBF）, while the effect of nano TiO2 with TSPP on the synovial fibroblast cells from human （HSC） and rat models （RSC） were investigated by confocal laser microscopy and 3-（4,5-dimethylthiazol-2-yl）- 2,5-diphenyltetrazolium bromide （MTT） assay. Our results suggest that nano TiO2 with TSPP can be readily utilized for effec- tive PDT treatment of Rheumatoid Arthritis （RA）.展开更多
基金CISL,Department of Physics,Annamalai University for the support in using AFM and SEM for experimentation
文摘Different mass fractions （0, 5%, 10%, and 15%） of the synthesized nano SiC particles reinforced Ti-6Al-4V （Ti64） alloy metal matrix composites （MMCs） were successfully fabricated by the powder metallurgy method. The effects of addition of SiC particle on the mechanical properties of the composites such as hardness and compressive strength were investigated. The optimum density （93.33%） was obtained at the compaction pressure of 6.035 MPa. Scanning electron microscopic （SEM） observations of the microstructures revealed that the wettability and the bonding force were improved in Ti64 alloy/5% nano SiCp composites. The effect of nano SiCp content in Ti64 alloy/SiCp matrix composite on phase formation was investigated by X-ray diffraction. The correlation between mechanical parameter and phase formation was analyzed. The new phase of brittle interfaced reaction formed in the 10% and 15% SiCp composite specimens and resulted in no beneficial effect on the strength and hardness. The compressive strength and hardness of Ti64 alloy/5% nano SiCp MMCs showed higher values. Hence, 5% SiCp can be considered to be the optimal replacement content for the composite.
基金supported by the National Natural Science Foundation of China (81325011)National High Technology Research & Development Program of China (2015AA020502, 2012AA022703)+1 种基金the Major Science & Technology Project of Suzhou (ZXY2012028)the National Science Foundation CREST program (NSF HRD-0932421)
文摘Photodynamic therapy （PDT） is one of the latest biomedical technologies used for treatment of various neoplastic and non-neoplastic diseases. However, there still exist some well-known problems regarding its efficacy, e.g. effective concentra- tion of the drug at the desired sites, the irradiation light dosimetry and biocompatibility of the photosensitizer. The introduction of nanotechnology and nanomaterial like biocompatible nano-titania （i.e., nano-TiO2） may facilitate to solve some of these problems. In this study we have explored the possibility of combining tetra sulphonatophenyl porphyrin （TSPP） with nano-titania （PT） for efficient PDT with least adverse effects. The spectroscopic properties of these nano-cornposites were characterized by using fluorescence and UV-Vis absorption spectroscopic study. The singlet oxygen quantum yield was deter- mined by using 2,5-diphenyl-3,4-benzofuran （DPBF）, while the effect of nano TiO2 with TSPP on the synovial fibroblast cells from human （HSC） and rat models （RSC） were investigated by confocal laser microscopy and 3-（4,5-dimethylthiazol-2-yl）- 2,5-diphenyltetrazolium bromide （MTT） assay. Our results suggest that nano TiO2 with TSPP can be readily utilized for effec- tive PDT treatment of Rheumatoid Arthritis （RA）.
