期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
钛酸盐纳米棒的制备及其光催化活性研究 被引量:2
1
作者 叶苗苗 陈忠林 +2 位作者 沈吉敏 刘小为 杨磊 《功能材料》 EI CAS CSCD 北大核心 2008年第12期2075-2078,共4页
采用水热法制备了钛酸盐纳米棒,样品再分别经400、500、600和800℃热处理2h。利用XRD、SEM、TEM、BET、UV-vis等手段对样品的物化性能进行了表征。以4-氯硝基苯为目标反应物考察了样品的光催化活性。结果表明,钛酸盐纳米棒具有较高的... 采用水热法制备了钛酸盐纳米棒,样品再分别经400、500、600和800℃热处理2h。利用XRD、SEM、TEM、BET、UV-vis等手段对样品的物化性能进行了表征。以4-氯硝基苯为目标反应物考察了样品的光催化活性。结果表明,钛酸盐纳米棒具有较高的热稳定性,直径分布在50~150nm,长度可达几微米。光催化结果显示,4-氯硝基苯的光催化降解反应为动力学拟一级反应,并且经500℃热处理后的钛酸盐纳米棒具有最高的催化活性,其表观速率常数为0.04215min^-1,是普通商用TiO2粉末的两倍。 展开更多
关键词 钛酸盐纳米棒 水热法 4-氯硝基苯 光催化
下载PDF
VO_x/Titanate复合材料纳米棒的水热合成及其电化学性能研究 被引量:2
2
作者 于龙 张校刚 《无机化学学报》 SCIE CAS CSCD 北大核心 2004年第9期1112-1116,共5页
Vanadium oxide/titanate composites nanorods (VOx / Titanate-CNRs) were synthesized in high yield by using titanate nanotubes as templates and V2O5·nH2O sol as the precursors under hydrothermal conditions (200 ℃,... Vanadium oxide/titanate composites nanorods (VOx / Titanate-CNRs) were synthesized in high yield by using titanate nanotubes as templates and V2O5·nH2O sol as the precursors under hydrothermal conditions (200 ℃, 48 h). Samples were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive analysis by X-ray (EDAX). X-ray diffraction structure determination showed that this new phase had the composition of V3O7·H2O and crystallized with orthorhombic symmetry. SEM and TEM tests showed that the samples were uniform straight rods with the diameter range from around 100 to 300 nm and the length over 10 μm. The chemical compositions of the samples were determined with EDXA. The electrochemical tests of samples (titanates nanotubes, V2O5 and VOx / Titanate-CNRs) prove that VOx / Titanate-CNRs exhibit a better electrochemical performance. 展开更多
关键词 钒氧化物/钛酸盐复合材料纳米 镁离子电池 嵌镁性能 水热合成 电化学性能
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部