Effects of Ti, Hf, Nb and W alloying elements addition on the microstructure and the mechanical behaviors of NiAl-Cr（Mo） intermetallic alloy were investigated by means of XRD, SEM, EDX and compression tests. The res...Effects of Ti, Hf, Nb and W alloying elements addition on the microstructure and the mechanical behaviors of NiAl-Cr（Mo） intermetallic alloy were investigated by means of XRD, SEM, EDX and compression tests. The results show that Ni-31Al-30Cr-4Mo-2（Ti, Hf, Nb, W） alloy consists of four phases： NiAl, ？？Cr solid solution, Cr2Nb and Ni2Al（Ti, Hf）. The mechanical properties are improved significantly compared with the base alloy. The compression yield strength at 1 373 K is 467 MPa and the room temperature compression ductility is 17.87% under the strain rate of 5.56？？0-3 s-1, due to the existence of Cr2Nb and Ni2Al（Ti, Hf） phases for strengthening and Ti solid solution in NiAl matrix and coarse Cr（Mo, W） solid solution phase at cellular boundaries for ductility. The elevated temperature compression deformation behavior of the alloy can be properly described by power-law equation： ε=0.898 σ8.47exp[-615/（RT）].展开更多
The vacuum brazing of TiAl based alloy with 40Cr steel was investigated using Ag-Cu-Ti filler metal. The experimental results show that the Ag, Cu, Ti atoms in the filler metal and the base metal inter-diffuse toward ...The vacuum brazing of TiAl based alloy with 40Cr steel was investigated using Ag-Cu-Ti filler metal. The experimental results show that the Ag, Cu, Ti atoms in the filler metal and the base metal inter-diffuse toward each other during brazing and react at the interface to form an inter-metallic AlCu 2Ti compound which joins two parts to produce a brazing joint with higher strength.展开更多
The electronic structures of TiAl-2M(M=V, Nb, Ta, Cr, Mo, W,Mn) alloy have been investigated using EHT band calculation method. Their bandstructures and average prperties have been obtained. The results show that dopi...The electronic structures of TiAl-2M(M=V, Nb, Ta, Cr, Mo, W,Mn) alloy have been investigated using EHT band calculation method. Their bandstructures and average prperties have been obtained. The results show that doping thetransition metal elements can effectively change the band structure and enable the alloysystem to show the stronger metallic feature. The dopants of V, Cr and Mn increase s-orbital component of Ti and Al in bonding orbital, therefore, there is more sphericalelectronic clound and weakly directional bonds in the crystal, which improve the duictil-ity of the alloy, Nb or Ta makes stronger bonding with Ti and Al, which improvestrength and oxidation resistance of the alloy.展开更多
基金Project supported by Aerospace Science and Technology Innovation Fund of China
文摘Effects of Ti, Hf, Nb and W alloying elements addition on the microstructure and the mechanical behaviors of NiAl-Cr（Mo） intermetallic alloy were investigated by means of XRD, SEM, EDX and compression tests. The results show that Ni-31Al-30Cr-4Mo-2（Ti, Hf, Nb, W） alloy consists of four phases： NiAl, ？？Cr solid solution, Cr2Nb and Ni2Al（Ti, Hf）. The mechanical properties are improved significantly compared with the base alloy. The compression yield strength at 1 373 K is 467 MPa and the room temperature compression ductility is 17.87% under the strain rate of 5.56？？0-3 s-1, due to the existence of Cr2Nb and Ni2Al（Ti, Hf） phases for strengthening and Ti solid solution in NiAl matrix and coarse Cr（Mo, W） solid solution phase at cellular boundaries for ductility. The elevated temperature compression deformation behavior of the alloy can be properly described by power-law equation： ε=0.898 σ8.47exp[-615/（RT）].
文摘The vacuum brazing of TiAl based alloy with 40Cr steel was investigated using Ag-Cu-Ti filler metal. The experimental results show that the Ag, Cu, Ti atoms in the filler metal and the base metal inter-diffuse toward each other during brazing and react at the interface to form an inter-metallic AlCu 2Ti compound which joins two parts to produce a brazing joint with higher strength.
文摘The electronic structures of TiAl-2M(M=V, Nb, Ta, Cr, Mo, W,Mn) alloy have been investigated using EHT band calculation method. Their bandstructures and average prperties have been obtained. The results show that doping thetransition metal elements can effectively change the band structure and enable the alloysystem to show the stronger metallic feature. The dopants of V, Cr and Mn increase s-orbital component of Ti and Al in bonding orbital, therefore, there is more sphericalelectronic clound and weakly directional bonds in the crystal, which improve the duictil-ity of the alloy, Nb or Ta makes stronger bonding with Ti and Al, which improvestrength and oxidation resistance of the alloy.
