Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a goo...Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a good approach was proposed to extract the plastic properties or constitutive equations of metals from nanoindentation test combining finite element simulation. Firstly, without consideration of strain hardening, the representative stress was determined by varying assumed representative stress over a wide range until a good agreement was reached between the computed and experimental loading curves. Similarly, the corresponding representative strain was determined with different hypothetical values of strain hardening exponent in the range of 0-0.6. Through modulating assumed strain hardening exponent values to make the computed unloading curve coincide with that of the experiment, the real strain hardening exponent was acquired. Once the strain hardening exponent was determined, the initial yield stress ay of metals could be obtained by the power law constitution. The validity of the proposed methodology was verified by three real metals： AISI 304 steel, Fe andA1 alloy.展开更多
The deformed microstructure evolution of depleted uranium impacted by steel projectile at a velocity of50m/s was investigated by means of confocal laser scanning microscope,electron backscatter diffraction,transmissio...The deformed microstructure evolution of depleted uranium impacted by steel projectile at a velocity of50m/s was investigated by means of confocal laser scanning microscope,electron backscatter diffraction,transmission electron microscope and indenter technique.The experimental results showed that the spherical cap crater was formed in depleted uranium target impacted by steel projectile,and the diameter and depth of the impacted crater were5.45and1.01mm,respectively.From crater rim to deep matrix,four deformed zones were classified,including twin fragmentation zone,high density deformation twin zone,low density deformation twin zone and matrix zone.Twinning was considered as the dominant plastic deformation mechanism of depleted uranium subjected to impact loadings.Besides twinning,the dislocation slipping also played an important role to accommodate the plastic deformation.Finally,the deformed microstructure evolution of depleted uranium under high velocity impact was proposed.展开更多
An analytical model on the normal perforation of reinforced concrete slabs is constructed. The effect of reinforcing bars is further hybridized in a general three-stage model consisting of initial cratering, tunnellin...An analytical model on the normal perforation of reinforced concrete slabs is constructed. The effect of reinforcing bars is further hybridized in a general three-stage model consisting of initial cratering, tunnelling and shear plugging. Besides three dimensionless numbers, i. e., the impact function I, the geometry function of projectile N and the dimensionless thickness of concrete target X, which are employed to predict the ballistic performance of perforation of concrete slabs, the reinforcement ratio Ps of concrete and the tensile strength fs of reinforcing bars are considered as the other main factors influencing the perforation process. Simpler solutions of ballistic performances of normal perforation of reinforced concrete slabs are formulated. Theoretical predictions agree well with individual published experimental data.展开更多
基金Project （51171125） supported by the National Natural Science Foundation of China Project （20110321051 ） supported by the Science and Technology Key Project of Shanxi Province, China
文摘Materials with the same elastic modulus E and representative stress and strain （σr,εr） present similar indentation-loading curves, whatever the value of strain hardening exponent n. Based on this definition, a good approach was proposed to extract the plastic properties or constitutive equations of metals from nanoindentation test combining finite element simulation. Firstly, without consideration of strain hardening, the representative stress was determined by varying assumed representative stress over a wide range until a good agreement was reached between the computed and experimental loading curves. Similarly, the corresponding representative strain was determined with different hypothetical values of strain hardening exponent in the range of 0-0.6. Through modulating assumed strain hardening exponent values to make the computed unloading curve coincide with that of the experiment, the real strain hardening exponent was acquired. Once the strain hardening exponent was determined, the initial yield stress ay of metals could be obtained by the power law constitution. The validity of the proposed methodology was verified by three real metals： AISI 304 steel, Fe andA1 alloy.
基金Project(2014B0301046)supported by the Science Development Fund of China Academy of Engineering PhysicsProject(51401187)supported by the National Natural Science Foundation of China
文摘The deformed microstructure evolution of depleted uranium impacted by steel projectile at a velocity of50m/s was investigated by means of confocal laser scanning microscope,electron backscatter diffraction,transmission electron microscope and indenter technique.The experimental results showed that the spherical cap crater was formed in depleted uranium target impacted by steel projectile,and the diameter and depth of the impacted crater were5.45and1.01mm,respectively.From crater rim to deep matrix,four deformed zones were classified,including twin fragmentation zone,high density deformation twin zone,low density deformation twin zone and matrix zone.Twinning was considered as the dominant plastic deformation mechanism of depleted uranium subjected to impact loadings.Besides twinning,the dislocation slipping also played an important role to accommodate the plastic deformation.Finally,the deformed microstructure evolution of depleted uranium under high velocity impact was proposed.
基金Supported by the State Key Lab of Explosion Science and Technology of BIT Under Contract (No. KFJJ04-3)
文摘An analytical model on the normal perforation of reinforced concrete slabs is constructed. The effect of reinforcing bars is further hybridized in a general three-stage model consisting of initial cratering, tunnelling and shear plugging. Besides three dimensionless numbers, i. e., the impact function I, the geometry function of projectile N and the dimensionless thickness of concrete target X, which are employed to predict the ballistic performance of perforation of concrete slabs, the reinforcement ratio Ps of concrete and the tensile strength fs of reinforcing bars are considered as the other main factors influencing the perforation process. Simpler solutions of ballistic performances of normal perforation of reinforced concrete slabs are formulated. Theoretical predictions agree well with individual published experimental data.
