A novel composite technique of orthogonally bonding carbon fiber-reinforced polymer （CFRP） strips and steel strips is proposed to improve the performance of reinforced concrete （RC） structures based on co-working ...A novel composite technique of orthogonally bonding carbon fiber-reinforced polymer （CFRP） strips and steel strips is proposed to improve the performance of reinforced concrete （RC） structures based on co-working of CFRP strips and steel strips. To verify the effectiveness of the method for strengthening RC two-way slabs, seven flat slabs with the dimensions of i 500 mm x 1 500 mm x 70 mm and an internal reinforcement ratio of 0.22% were prepared and tested until failure under concentrated loading, of which one was unstrengthened, one was strengthened with CFRP strips bonded to its soffit making a grid pattern （termed the CFRP grid）, and five were strengthened with a hybrid grid of CFRP strips and steel strips in two orthogonal directions （termed the CFRP-steel grid） to the bottom with steel bolt anchorage. The investigation parameters are the strengthening method, the strip spacing （150, 200, and 250 mm） and the layers of CFRP strips （one layer, two layers, and three layers of CFRP strips are applied for CFRP-steel grid）. The experimental results show that the strengthening RC two-way slabs with CFRP-steel grid are effective in delaying concrete cracking and enhancing the load-carrying capacity and deformability in comparison to the CFRP grid strengthening. The yield-line analysis model is proposed to predict the load-carrying capacity of the strengthened slabs. The prediction results are in good agreement with the experimental results.展开更多
A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were establish...A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.展开更多
Composite slabs with profiled steel sheet are widely applied in practical structures now. Plenty of literatures can be available about simply supported composite slabs with single span. However, continuous slabs alway...Composite slabs with profiled steel sheet are widely applied in practical structures now. Plenty of literatures can be available about simply supported composite slabs with single span. However, continuous slabs always exist in high-rise building structures. In order to obtain the ultimate loading capacity of continuous composite slabs, the full scale test on slab specimens with high cost need to be carried out. This paper presented an analytical model for calculating the ultimate loading capacity of continuous composite slabs. Only the small-scale slide block test needed to be carried out for determining some mechanical parameters, resulting in less cost, compared with the conventional m-k test method. Various load conditions and parameters were considered in the analytical model. The comparison between test results and predicted results showed that the proposed method had enough precision. Furthermore, the simplified method was also proposed for practical design.展开更多
基金The National Natural Science Foundation of China(No.51108355)
文摘A novel composite technique of orthogonally bonding carbon fiber-reinforced polymer （CFRP） strips and steel strips is proposed to improve the performance of reinforced concrete （RC） structures based on co-working of CFRP strips and steel strips. To verify the effectiveness of the method for strengthening RC two-way slabs, seven flat slabs with the dimensions of i 500 mm x 1 500 mm x 70 mm and an internal reinforcement ratio of 0.22% were prepared and tested until failure under concentrated loading, of which one was unstrengthened, one was strengthened with CFRP strips bonded to its soffit making a grid pattern （termed the CFRP grid）, and five were strengthened with a hybrid grid of CFRP strips and steel strips in two orthogonal directions （termed the CFRP-steel grid） to the bottom with steel bolt anchorage. The investigation parameters are the strengthening method, the strip spacing （150, 200, and 250 mm） and the layers of CFRP strips （one layer, two layers, and three layers of CFRP strips are applied for CFRP-steel grid）. The experimental results show that the strengthening RC two-way slabs with CFRP-steel grid are effective in delaying concrete cracking and enhancing the load-carrying capacity and deformability in comparison to the CFRP grid strengthening. The yield-line analysis model is proposed to predict the load-carrying capacity of the strengthened slabs. The prediction results are in good agreement with the experimental results.
基金Project(51178333)supported by the National Natural Science Foundation of ChinaProject(SLDRCE09-D-03)supported by the Ministry of Science and Technology of China
文摘A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.
文摘Composite slabs with profiled steel sheet are widely applied in practical structures now. Plenty of literatures can be available about simply supported composite slabs with single span. However, continuous slabs always exist in high-rise building structures. In order to obtain the ultimate loading capacity of continuous composite slabs, the full scale test on slab specimens with high cost need to be carried out. This paper presented an analytical model for calculating the ultimate loading capacity of continuous composite slabs. Only the small-scale slide block test needed to be carried out for determining some mechanical parameters, resulting in less cost, compared with the conventional m-k test method. Various load conditions and parameters were considered in the analytical model. The comparison between test results and predicted results showed that the proposed method had enough precision. Furthermore, the simplified method was also proposed for practical design.
