3 D roll-forming for high strength steel sheets is a new technology at present.Double racks gear 3D roll forming machine developed by our research group can be used to perform variable cross section roll forming for h...3 D roll-forming for high strength steel sheets is a new technology at present.Double racks gear 3D roll forming machine developed by our research group can be used to perform variable cross section roll forming for high strength steel.In the paper,a dynamic model of 8-DOF double rack gear 3D roll-forming machine is established by the method of Lagrange equation.The expression of the angle acceleration of the system response is obtained by solving the dynamic equations.Through an actual engineering example,the dynamical characters of the 3D roll forming machine are revealed.The results can support the design of 3D roll forming machine.Meanwhile,the research will play an active role in the development of control system.展开更多
In this paper, the high speed tension experiments have been performed on ultra high strength bulletproof steel. The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of ...In this paper, the high speed tension experiments have been performed on ultra high strength bulletproof steel. The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2.3 mm. The mechanical properties at strain rates of 0.001 s^-1, 0.01 s^-1, 0.1 s^-1 and 1 s^-1 were carried out on MTSS10, while those at higher strain rates of 200 s^-1, 500 s^-1 and i 000 s^-1 were tested on HTM5020 high speed tension tester and Hopkinson bar. The data from the high speed tension experiments were fitted via Johnson-Cook constitutive equation, and the fracture surface of each specimen was analyzed by scanning electron microscope （SEM）. The results indicate that, the shoot resistance capability of bulletproof steel is closely related to its strength, thickness and flow behaviors under high strain rate. The shoot resistance will be improved in the case of higher strength and better matching between strength and elongation. The Johnson-Cook constitutive equation fitted via experimental data provides fundament to numerical simulation. With the increase of strain rate, the size and depth of dimple trend to decrease and the depth of dimple changes less in steel with lower strength and higher elongation. The SEM analysis of fracture aspect is of benefit for further understanding of deformation and fracture mode under high strain rate.展开更多
基金Supported by the National Science and Technology Supporting Plan Projects of China （No.2011BAG03B03）.
文摘3 D roll-forming for high strength steel sheets is a new technology at present.Double racks gear 3D roll forming machine developed by our research group can be used to perform variable cross section roll forming for high strength steel.In the paper,a dynamic model of 8-DOF double rack gear 3D roll-forming machine is established by the method of Lagrange equation.The expression of the angle acceleration of the system response is obtained by solving the dynamic equations.Through an actual engineering example,the dynamical characters of the 3D roll forming machine are revealed.The results can support the design of 3D roll forming machine.Meanwhile,the research will play an active role in the development of control system.
文摘In this paper, the high speed tension experiments have been performed on ultra high strength bulletproof steel. The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2.3 mm. The mechanical properties at strain rates of 0.001 s^-1, 0.01 s^-1, 0.1 s^-1 and 1 s^-1 were carried out on MTSS10, while those at higher strain rates of 200 s^-1, 500 s^-1 and i 000 s^-1 were tested on HTM5020 high speed tension tester and Hopkinson bar. The data from the high speed tension experiments were fitted via Johnson-Cook constitutive equation, and the fracture surface of each specimen was analyzed by scanning electron microscope （SEM）. The results indicate that, the shoot resistance capability of bulletproof steel is closely related to its strength, thickness and flow behaviors under high strain rate. The shoot resistance will be improved in the case of higher strength and better matching between strength and elongation. The Johnson-Cook constitutive equation fitted via experimental data provides fundament to numerical simulation. With the increase of strain rate, the size and depth of dimple trend to decrease and the depth of dimple changes less in steel with lower strength and higher elongation. The SEM analysis of fracture aspect is of benefit for further understanding of deformation and fracture mode under high strain rate.
