温度对干式煤气柜的影响及纠正办法

分析温度对干式煤气柜产生的各种影响。着重介绍温度与密封油粘度的关系,气柜钢结构因温度产生线性膨胀或收缩而引起的各种变化等,并提出处理措施。

Study on Interactive Computer Program for Seismic Appraisal and Seismic Strengthening of R.C. Frame Structures

In many cases, seismic appraisal of existing structures is carried out by the two step method and seismic strengthening of R.C. frame structures is solved just based on rough calculation or experience of designers, which may lead to either lack of safety or too conservative in design. According to some related criteria and experts experience, a computer program is developed specially for seismic appraisal and seismic strengthening of R.C. frames (not more than 10 storeys) in this paper. Because the progra...

Finite element model updating of existing steel bridge based on structural health monitoring

Based on the physical meaning of sensitivity,a new finite element(FE) model updating method was proposed. In this method,a three-dimensional FE model of the Nanjing Yangtze River Bridge(NYRB) with ANSYS program was established and updated by modifying some design parameters. To further validate the updated FE model,the analytical stress-time histories responses of main members induced by a moving train were compared with the measured ones. The results show that the relative error of maximum stress is 2.49% and the minimum relative coefficient of analytical stress-time histories responses is 0.793. The updated model has a good agreement between the calculated data and the tested data,and provides a current baseline FE model for long-term health monitoring and condition assessment of the NYRB. At the same time,the model is validated by stress-time histories responses to be feasible and practical for railway steel bridge model updating.

Probability calculation of rebars corrosion in reinforced concrete using css algorithms

Reinforcement inside the concrete is protected from corrosion and its damages until several years after the construction. After corrosion initiation, the cross section of reinforcement begins to reduce and often load bearing of the reinforced concrete structure will be reduced significantly. Corrosion of reinforcements in concrete in polluted and contaminated areas can occur in two ways: chloride and carbonation. In this work, meta-heuristic approach of charged system search(CSS) is used to calculate corrosion occurrence probability due to chloride ions penetration. The model efficiency is verified by comparing the available examples in technical literature and results of Monte Carlo analysis. According to the analyses performed, using different probabilistic distributions regardless of probabilistic moments based on real distribution leads to diverse results. In addition, influence of each effective parameter in corrosion occurrence varies by changing other parameters.

Design methods of headed studs for composite decks of through steel bridges in high-speed railway

Aimed at two typical composite floor systems of through steel bridges in high speed railway,design methods of headed studs were put forward for different composite members through comparing and analyzing the structure,mechanical characteristics and transmission routes of deck loads.The simplified calculation models were brought out for the stud design of the longitudinal girders and transverse girders in the composite floor system of Nanjing Dashengguan Yangtze River Bridge (NDB).Studs were designed and arranged by taking the middle panel of 336 m main span for example.The results show that under deck loads,the longitudinal girders in the composite floor system of through steel bridges are in tension-bending state,longitudinal shear force on the interface is caused by both longitudinal force of "The first mechanical system" and vertical bending of "The second mechanical system",and studs can be arranged with equal space in terms of the shear force in range of 0.2d (where d is the panel length) on the top ends.Transverse girders in steel longitudinal and transverse girders-concrete slab composite deck are in compound-bending state,and out-of-plane bending has to be taken into account in the stud design.In orthotropic integral steel deck-concrete slab composite deck,out-of-plane bending of transverse girders is very small so that it can be neglected,and studs on the orthotropic integral steel deck can be arranged according to the structural requirements.The above design methods and simplified calculation models have been applied in the stud design of NDB.

Statistical Algorithm for Damage Detection of Concrete Beams Based on Piezoelectric Smart Aggregate

The functional piezoelectric ceramic smart aggregate(SA) sensors and actuators,based on piezoelectric ceramic materials such as lead zirconium titanate(PZT),were embedded into the reinforced concrete beams with three-point bending under static loading for purposes of damage detection.The SA actuators generated the desired sine sweep excitation signals online and the SA sensors received and detected real-time signals before and after damage.The wavelet analysis and statistical characteristics about damage signals were used as a signal processing and analysis tool to extract the optimal damage information and establish a statistical damage detection algorithm.The damage index-based wavelet analysis and damage probability-based probability and statistics were proposed by PZT wavebased theory and active health monitoring technology.The results showed that the existence of cracks inside largely attenuated the amplitude of active monitoring signal after the damage of beam and the attenuation was related to the severity degree of damage.The innovative statistical algorithm of damage pattern detection based PZT-SA can effectively determine damage probability and damage degree,and provide a prediction for the critical damage location of reinforced concrete structures.The developed method can be utilized for the structural health comprehensive monitoring and damage detection on line of various large-scale concrete structures.

Dynamic Performance Test and Estimation of Reinforcement Effect on a Workshop after Column-Cut Supported by Joist

The reinforcement effect of a reconstruction scheme for a steel factory building was investigated using finite element method and dynamic performance test. The workshop concerned is a portal frame structure with four spans and two slope roofs, of which ten columns need cutting for expanding span. The design and reconstruction project of column-cut supported by joist were introduced, which includes column reinforcement, connection rebuilding between brackets and crane beams, and the changing of rigid joint into hinge joint. The construction scheme was put forward in the light of the characteristics of the reinforcement and reconstruction. Spot test of dynamic performance on the workshop and comparison with theoretical analysis results show that the column-cut supported by joist design is effective and the reconstruction project is successful.

Discussion of Construction Related to Sheet-piled Wharf

In this paper, firstly, the characteristics of sheet-piled wharf construction are introduced. And then, six aspects of sheet-piled wharf construction are discussed： sheet pile, anchorage structure, guiding girder, anchor rod, backfilling behind sheet pile wall, superstructure of sheet-piled wharf etc. The construction of sheet pile involves piling on the land or piling？on？the sea, piling methods, piling patterns, guide frame, embedding sheet piles etc.