Sonoprobe method has been applied in non-destructive inspection of anchorage project. The fundament is that dynamic transient excitation causes the elastic vibration of an anchor bar, and flaws can be estimated or ded...Sonoprobe method has been applied in non-destructive inspection of anchorage project. The fundament is that dynamic transient excitation causes the elastic vibration of an anchor bar, and flaws can be estimated or deduced by determining transient response of the anchor bar. FEA numeric solution of hyperbolic equation indicates that deductions must comply with acoustic parameters such as velocity of sound, vibration range, wave shape etc when inspecting interior flaws in the grout of an anchor bar. Based on wavelet packet analysis, the energy eigenvector is a flaw vector, which could be regarded as the basis in the nondestructive inspection of anchors. As a non-linear dynamical system, artifical neural networks dealing with quality inspection of gray system have been proved efficient.展开更多
Aiming at the large deformation and support problems of high-stress and broken-expansion surrounding rock, and taking 1 000 m level roadway of Mine II in Jinchuan as the research object, an investigation on the deform...Aiming at the large deformation and support problems of high-stress and broken-expansion surrounding rock, and taking 1 000 m level roadway of Mine II in Jinchuan as the research object, an investigation on the deformation and damage of roadway surrounding rock and an analysis of its mechanism were carried out. The gray correlation theory was used in support scheme optimization design. First, causes and mechanism of deformation of the 1 000 m horizontal transport channel were analyzed through field investigation, laboratory test and data processing methods. We arguued that poor engineering geological conditions and deep pressure increases were the main factors, and the deformation mechanism was mainly the ground deformation pressure. Second, the gray correlation theory was used to construct supporting optimization decision method in the deep roadway. This method more comprehensively considers various factors, including construction, costs, and supporting material functions. The combined support with pre-stressed anchor cables, shotcrete layer, bolt and metal net was put forward according to the actual roadway engineering characteristics. Finally, 4 support schemes were put forward for new roadways. The gray relational theory was applied to optimizing the supporting method, undertaking technical and economic comparison to obtain the correlation degree, and accordingly the schemes were evaluated. It was concluded as follows： the best was the flexible retaining scheme using the steel strand anchor; the second best was the one using plate anchors on the top and rigid common screw steel bolt on the two sides; the ttiird was; the rigid common screw steel bolt in full section of roadway; and the worst is the planished steel rigid support. The optimized scheme was applied to the 1000 m level of new excavation roadway. The results show that the roadway surrounding rock can reach a stable state after 5 to 6 months monitoring, with a convergence rate less than 1 mm/d.展开更多
The tensile and shear strength of intrinsic bolting support systems has always been a major concern of designers. A comprehensive laboratory testing program was designed to evaluate the tensile and shear strength of i...The tensile and shear strength of intrinsic bolting support systems has always been a major concern of designers. A comprehensive laboratory testing program was designed to evaluate the tensile and shear strength of individual wires and completely wound PC-strand cables. PC-strand cables with smooth wires and the recent anchorage enhancement innovation of indentation were evaluated and compared. The testing protocol detailed in ISO Standard 15630 utilizes a mandrel system that was investigated at 3different diameters which alters the wire to mandrel ratio from 2:1 to 9:1. The results demonstrate that the difference between smooth and indented wires is statistically insignificant when larger diameter mandrels are used,and that indentation does not adversely affect strand properties and performance.Insight into the shearing mechanism and evaluation techniques are discussed with the introduction of triaxial loading to describe the PC-strand tensile and shearing mechanisms. Another important result indicates that the shear strength of PC-strand cable bolting systems has a greater shear strength value than traditional steel bar bolting systems.展开更多
基金Funded by High-tech Foundation of National Planning Committee (No. [1992]2062)
文摘Sonoprobe method has been applied in non-destructive inspection of anchorage project. The fundament is that dynamic transient excitation causes the elastic vibration of an anchor bar, and flaws can be estimated or deduced by determining transient response of the anchor bar. FEA numeric solution of hyperbolic equation indicates that deductions must comply with acoustic parameters such as velocity of sound, vibration range, wave shape etc when inspecting interior flaws in the grout of an anchor bar. Based on wavelet packet analysis, the energy eigenvector is a flaw vector, which could be regarded as the basis in the nondestructive inspection of anchors. As a non-linear dynamical system, artifical neural networks dealing with quality inspection of gray system have been proved efficient.
基金Funded by Plan Projects of Hunan Provincial Science&Technology Department(2014FJ3046)Scientific Research Fund of Hunan Provincial Education Department(No.14A045)+1 种基金National Natural Science Foundation of China(Grant Nos.51434006,51374105 and 51374106)China Postdoctoral Science Foundation 2014M562135)
文摘Aiming at the large deformation and support problems of high-stress and broken-expansion surrounding rock, and taking 1 000 m level roadway of Mine II in Jinchuan as the research object, an investigation on the deformation and damage of roadway surrounding rock and an analysis of its mechanism were carried out. The gray correlation theory was used in support scheme optimization design. First, causes and mechanism of deformation of the 1 000 m horizontal transport channel were analyzed through field investigation, laboratory test and data processing methods. We arguued that poor engineering geological conditions and deep pressure increases were the main factors, and the deformation mechanism was mainly the ground deformation pressure. Second, the gray correlation theory was used to construct supporting optimization decision method in the deep roadway. This method more comprehensively considers various factors, including construction, costs, and supporting material functions. The combined support with pre-stressed anchor cables, shotcrete layer, bolt and metal net was put forward according to the actual roadway engineering characteristics. Finally, 4 support schemes were put forward for new roadways. The gray relational theory was applied to optimizing the supporting method, undertaking technical and economic comparison to obtain the correlation degree, and accordingly the schemes were evaluated. It was concluded as follows： the best was the flexible retaining scheme using the steel strand anchor; the second best was the one using plate anchors on the top and rigid common screw steel bolt on the two sides; the ttiird was; the rigid common screw steel bolt in full section of roadway; and the worst is the planished steel rigid support. The optimized scheme was applied to the 1000 m level of new excavation roadway. The results show that the roadway surrounding rock can reach a stable state after 5 to 6 months monitoring, with a convergence rate less than 1 mm/d.
文摘The tensile and shear strength of intrinsic bolting support systems has always been a major concern of designers. A comprehensive laboratory testing program was designed to evaluate the tensile and shear strength of individual wires and completely wound PC-strand cables. PC-strand cables with smooth wires and the recent anchorage enhancement innovation of indentation were evaluated and compared. The testing protocol detailed in ISO Standard 15630 utilizes a mandrel system that was investigated at 3different diameters which alters the wire to mandrel ratio from 2:1 to 9:1. The results demonstrate that the difference between smooth and indented wires is statistically insignificant when larger diameter mandrels are used,and that indentation does not adversely affect strand properties and performance.Insight into the shearing mechanism and evaluation techniques are discussed with the introduction of triaxial loading to describe the PC-strand tensile and shearing mechanisms. Another important result indicates that the shear strength of PC-strand cable bolting systems has a greater shear strength value than traditional steel bar bolting systems.
