期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
钻沟铣刀数学模型的建立 被引量:2
1
作者 董丽华 王战中 +1 位作者 李彬芳 赵彦玲 《哈尔滨理工大学学报》 CAS 1999年第4期38-41,共4页
采用分析计算法,建立了钻沟铣刀数学模型,在此基础上用VisualBasic语言编写了钻沟铣刀参数化设计及绘图软件,从而提高了钻沟铣刀的参数化计算精度和设计效率.
关键词 钻沟铣刀 数学模型 参数化设计 铣刀
下载PDF
关于轧制钻头的扇形板的截形及其序列的研究 被引量:1
2
作者 刘媛 《河北机电学院学报》 1992年第1期19-27,共9页
本文根据四辊轧机轧制钻头的需要,给出了盘状工具轧制钻关的几何模型,,研究了轧制钻头主沟的扇形板近似截形设计和计算机理,研究了扇形板截形序列。并进行了实例计算,给出了扇形板截形曲线数据和轧制多种钻头用同一规格的扇形板,且符合... 本文根据四辊轧机轧制钻头的需要,给出了盘状工具轧制钻关的几何模型,,研究了轧制钻头主沟的扇形板近似截形设计和计算机理,研究了扇形板截形序列。并进行了实例计算,给出了扇形板截形曲线数据和轧制多种钻头用同一规格的扇形板,且符合精度要求和误差表。 展开更多
关键词 钻沟 扇形板 几何模型 轧制
下载PDF
轧制麻花钻的数学模型
3
作者 刘媛 《辽宁工学院学报》 1997年第4期21-23,共3页
采用逆包络法,对轧制麻花钻的扇形板截形及其序列进行了分析,建立了数学模型,得到了符合国际标准的具体数据。
关键词 钻沟 扇形板 数学模型 截形 轧制麻花
下载PDF
FBT断屑钻头
4
作者 鑫夫 《工具技术》 1982年第6期14-14,共1页
断屑钻顾名思义是切屑短,即不出长屑的钻头(简称CB钻头)。这种钻头是英国Firth Brown公司的专利产品,结构简单,断屑槽型是沿着钻沟全长铣制而成,对钻头切削刃性能、寿命无不良影响,重磨也与普通钻头一样。钻削时,切屑顺着钻沟流动,接触... 断屑钻顾名思义是切屑短,即不出长屑的钻头(简称CB钻头)。这种钻头是英国Firth Brown公司的专利产品,结构简单,断屑槽型是沿着钻沟全长铣制而成,对钻头切削刃性能、寿命无不良影响,重磨也与普通钻头一样。钻削时,切屑顺着钻沟流动,接触到断屑槽时,切屑就卷曲或被断成碎片。切屑变成碎片或卷曲后,可防止其堵塞,使切屑流动通畅。碎片切屑极易从孔中排出,尤其在水平钻孔时更为有效。切属不堵塞于钻沟内,可避免加工过程停顿,便于连续钻孔。同时,切屑短,冷却液易流出,可带走大量切削热,这对钻尖极为有利,可提高钻孔效率。从图中的截面形状可知,断屑槽型增加了横截面面积, 展开更多
关键词 断屑 FBT 钻沟
下载PDF
驼路沟钴矿区矿坑涌水量的预测方法 被引量:1
5
作者 唐录明 祁焕芳 《西部探矿工程》 CAS 2008年第6期152-153,共2页
根据已有的驼路沟钴矿区水文资料,分析了驼路沟钴矿区水文地质条件及矿坑充水因素,概化了边界类型,用2种不同的方法预测了矿坑涌水量。
关键词 驼路矿区 矿坑涌水量 预测
下载PDF
Late-Quaternary strong earthquakes on the seismogenic fault of the 1976 M_s7.8 Tangshan earthquake,Hebei,as revealed by drilling and trenching 被引量:15
6
作者 GUO Hui JIANG WaLi XIE XinSheng 《Science China Earth Sciences》 SCIE EI CAS 2011年第11期1696-1715,共20页
Composite borehole profiling combined with trenching is an effective way to acquire evidence of past ruptures of buffed active faults. In this study, three composite borehole profiles and a large-scale trench excavati... Composite borehole profiling combined with trenching is an effective way to acquire evidence of past ruptures of buffed active faults. In this study, three composite borehole profiles and a large-scale trench excavation were carded out across the surface rupture zone of the 1976 Ms7.8 Tangshan earthquake. The following three major conclusions have been reached. (1) The surface rupture zone of the 1976 earthquake extends more than 47 km long to the south of Tangshan city, passing to the west of Sunjialou, to Daodi town in Fengnan County, to Xihe in Fengnan County. (2) The surface rupture zone is divided into south and north branches. The north branch has mainly fight-lateral strike-slip motion, and the vertical displacement of the surface is up on the west and down on the east. On the other hand, the vertical displacement of the south branch is up on the east and down on the west, accompanied by some right-lateral slip. Such a faulting style cannot be explained by the movement of a single normal or reverse fault, but is consistent with the vertical displacement field induced by the fight-lateral strike-slip of the fault belt. The drilling and trenching data from this study verify that such activity continued through the Late Quaternary on the Tangshan Fault. (3) The fault planes exhumed by trenching and the dislocations of strata revealed by the boreholes indicate that multiple faulting events occurred on the Tangshan Fault in the Late Quaternary. The timing of three ruptures prior to the 1976 earthquake was 7.61-8.13, 〉14.57, and 24.21-26.57 ka BP. Counting the earthquake of 1976, the recurrence interval of the four strong events is about 6.7 to 10.8 ka. On one of the three borehole profiles, the Niumaku profile, nine faulting events were detected since 75.18 ka BP with an average interval of 8.4 ka. In addition, this paper also discusses the difference between the Late Quaternary sedimentary environments to the north and south of Tangshan city based on stratum dating. 展开更多
关键词 Tangshan earthquake surface rupture zone multi-stage activity earthquake recurrence interval paleoseismic trench-ing borehole profile
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部