Proper utilization of the FeSO4·7H2O waste slag generated from TiO2 industry is an urgent need, and Fe3O4 particles are currently being widely used in the wastewater flocculation field. In this work, magnetite wa...Proper utilization of the FeSO4·7H2O waste slag generated from TiO2 industry is an urgent need, and Fe3O4 particles are currently being widely used in the wastewater flocculation field. In this work, magnetite was recovered from ferrous sulphate by a novel co-precipitation method with calcium hydroxide as the precipitant. Under optimum conditions, the obtained spherical magnetite particles are well crystallized with a Fe304 purity of 88.78%, but apt to aggregate with a median particle size of 1.83 μm. Magnetic measurement reveals the obtained Fe304 particles are soft magnetic with a saturation magnetization of 81.73 A-m2/kg. In addition, a highly crystallized gypsum co-product is obtained in blocky or irregular shape. Predictably, this study would provide additional opportunities for future application of low-cost Fe3O4 particles in water treatment field.展开更多
To make the ferroelectric BaTiO3 possess ferromagnetism simultaneously,magnetic Fe was doped into BaTiO3 ceramics at doping levels up to 10%(molar fraction).Both tetragonal and hexagonal phases coexisted in the Fe-dop...To make the ferroelectric BaTiO3 possess ferromagnetism simultaneously,magnetic Fe was doped into BaTiO3 ceramics at doping levels up to 10%(molar fraction).Both tetragonal and hexagonal phases coexisted in the Fe-doped BaTiO3 ceramics except at 1% doping level.X-ray diffraction analysis indicated that higher doping level of Fe,higher sintering temperature and longer sintering time promoted the formation of hexagonal phases in Fe-doped BaTiO3 ceramics.Ferroelectricity was observed in all samples at room temperature,but it was greatly depressed by Fe doping.Except at doping level of 1%,room-temperature ferromagnetism was observed in the BaTiO3 ceramics.The dependence of the saturation magnetization and coercivities of the Fe-doped BaTiO3 ceramics on doping level was systematically studied.Both the saturation magnetization and magnetic coercivities were found to be dependent on the doping level as well as the fraction of the hexagonal phase in the ceramics.展开更多
In some control strategies of the direct-rive permanent magnet generator(DDPMG),the mathematics model is excessively simplified and some complex nonlinear characteristics,such as core saturation and cross-saturation,a...In some control strategies of the direct-rive permanent magnet generator(DDPMG),the mathematics model is excessively simplified and some complex nonlinear characteristics,such as core saturation and cross-saturation,are generally neglected.To solve this problem,this paper utilizes the frozen element permeability method to compute the armature self-and mutual-inductance,permanent magnet d-and q-axis flux varying with d-axis and q-axis current,then an improved model is presented in which the core saturation and cross-saturation between d-axis and q-axis are considered effectively.Based on this model,the method for computing the performance of the generators is also proposed.Taking a 1.5-MW DDPMG as an example,the time-stepping finite element method(T-S FEM) is adopted to analyze the performance with no-load and loaded conditions,the results show a good agreement with the ones obtained by the improved model.Compared with the simplified model,it is demonstrated that the presented model has the high efficiency and reliability and can provide a good reference for optimization design of DDPMG and other PM motors.展开更多
Monodisperse nonstoichiometric zinc ferrite nanoparticles with a tunable size of 4.1–32.2 nm are fabricated via thermal decomposition. An extrinsic impurity phase of the ZnO component is present in the zinc ferrite n...Monodisperse nonstoichiometric zinc ferrite nanoparticles with a tunable size of 4.1–32.2 nm are fabricated via thermal decomposition. An extrinsic impurity phase of the ZnO component is present in the zinc ferrite nanoparticles with a size of <10 nm, but this phase can be eliminated after the air annealing treatment. The atom ratio of Zn/Fe and concentration of oxygen vacancies decrease as the particle size of zinc ferrite increases, causing magnetic transition from superparamagnetism to ferromagnetism. The X-ray magnetic circular dichroism spectra reveal that the spin magnetic moments of Fe^(3+)are reduced, and the orbital magnetic moments are frozen with the increasing atom ratio of Zn/Fe. Therefore,saturation magnetization decreases. The saturation magnetizations of all the zinc ferrite nanoparticles decrease after the air annealing treatment, suggesting that oxygen vacancies considerably influence the magnetic properties. The air annealing treatment can minimize the number of oxygen defects,which trigger some of the Fe^(3+)–OV–Fe^(3+)ferrimagnetic couplings to transfer into the Fe^(3+)–O^(2-)–Fe^(3+)antiferromagnetic couplings. This work provides new insights regarding the magnetic performance of spinel ferrites by tuning the stoichiometric ratio and oxygen defects.展开更多
基金Project(2013A090100013)supported by the Special Project on the Integration of Industry,Education and Research of Guangdong Province,ChinaProject(201407300993)supported by the High-Tech Research and Development Program of Xinjiang Uygur Autonomous Region,China
文摘Proper utilization of the FeSO4·7H2O waste slag generated from TiO2 industry is an urgent need, and Fe3O4 particles are currently being widely used in the wastewater flocculation field. In this work, magnetite was recovered from ferrous sulphate by a novel co-precipitation method with calcium hydroxide as the precipitant. Under optimum conditions, the obtained spherical magnetite particles are well crystallized with a Fe304 purity of 88.78%, but apt to aggregate with a median particle size of 1.83 μm. Magnetic measurement reveals the obtained Fe304 particles are soft magnetic with a saturation magnetization of 81.73 A-m2/kg. In addition, a highly crystallized gypsum co-product is obtained in blocky or irregular shape. Predictably, this study would provide additional opportunities for future application of low-cost Fe3O4 particles in water treatment field.
基金Project(60661001) supported by the National Natural Science Foundation of China
文摘To make the ferroelectric BaTiO3 possess ferromagnetism simultaneously,magnetic Fe was doped into BaTiO3 ceramics at doping levels up to 10%(molar fraction).Both tetragonal and hexagonal phases coexisted in the Fe-doped BaTiO3 ceramics except at 1% doping level.X-ray diffraction analysis indicated that higher doping level of Fe,higher sintering temperature and longer sintering time promoted the formation of hexagonal phases in Fe-doped BaTiO3 ceramics.Ferroelectricity was observed in all samples at room temperature,but it was greatly depressed by Fe doping.Except at doping level of 1%,room-temperature ferromagnetism was observed in the BaTiO3 ceramics.The dependence of the saturation magnetization and coercivities of the Fe-doped BaTiO3 ceramics on doping level was systematically studied.Both the saturation magnetization and magnetic coercivities were found to be dependent on the doping level as well as the fraction of the hexagonal phase in the ceramics.
基金supported by the National Natural Science Foundation of China (Grant Nos. 50977028,51077048)
文摘In some control strategies of the direct-rive permanent magnet generator(DDPMG),the mathematics model is excessively simplified and some complex nonlinear characteristics,such as core saturation and cross-saturation,are generally neglected.To solve this problem,this paper utilizes the frozen element permeability method to compute the armature self-and mutual-inductance,permanent magnet d-and q-axis flux varying with d-axis and q-axis current,then an improved model is presented in which the core saturation and cross-saturation between d-axis and q-axis are considered effectively.Based on this model,the method for computing the performance of the generators is also proposed.Taking a 1.5-MW DDPMG as an example,the time-stepping finite element method(T-S FEM) is adopted to analyze the performance with no-load and loaded conditions,the results show a good agreement with the ones obtained by the improved model.Compared with the simplified model,it is demonstrated that the presented model has the high efficiency and reliability and can provide a good reference for optimization design of DDPMG and other PM motors.
基金financially supported by the National Natural Science Foundation of China (51572218,11504293 and 11904275)the Natural Science Foundation of Shaanxi Province (2019JM-138)+1 种基金the Scientific Research Program Funded by Shaanxi Provincial Education Department (18JK0786,19JK0413 and 20JK0946)the Key Project of Research and Development of Shaanxi Province (2018ZDCXL-GY-08-05)。
文摘Monodisperse nonstoichiometric zinc ferrite nanoparticles with a tunable size of 4.1–32.2 nm are fabricated via thermal decomposition. An extrinsic impurity phase of the ZnO component is present in the zinc ferrite nanoparticles with a size of <10 nm, but this phase can be eliminated after the air annealing treatment. The atom ratio of Zn/Fe and concentration of oxygen vacancies decrease as the particle size of zinc ferrite increases, causing magnetic transition from superparamagnetism to ferromagnetism. The X-ray magnetic circular dichroism spectra reveal that the spin magnetic moments of Fe^(3+)are reduced, and the orbital magnetic moments are frozen with the increasing atom ratio of Zn/Fe. Therefore,saturation magnetization decreases. The saturation magnetizations of all the zinc ferrite nanoparticles decrease after the air annealing treatment, suggesting that oxygen vacancies considerably influence the magnetic properties. The air annealing treatment can minimize the number of oxygen defects,which trigger some of the Fe^(3+)–OV–Fe^(3+)ferrimagnetic couplings to transfer into the Fe^(3+)–O^(2-)–Fe^(3+)antiferromagnetic couplings. This work provides new insights regarding the magnetic performance of spinel ferrites by tuning the stoichiometric ratio and oxygen defects.
