Combustion synthesis involving metallothermic reduction of Fe2O3 and TiO2 was conducted in the mode of self-propagating high-temperature synthesis(SHS)to fabricate FeAl-based composites with dual ceramic phases,TiB2/A...Combustion synthesis involving metallothermic reduction of Fe2O3 and TiO2 was conducted in the mode of self-propagating high-temperature synthesis(SHS)to fabricate FeAl-based composites with dual ceramic phases,TiB2/Al2O3 and TiC/Al2O3.The reactant mixture included thermite reagents of 0.6Fe2O3+0.6TiO2+2Al,and elemental Fe,Al,boron,and carbon powders.The formation of xFeAl−0.6TiB2−Al2O3 composites with x=2.0−3.6 and yFeAl−0.6TiC−Al2O3 composites with y=1.8−2.75 was studied.The increase of FeAl causes a decrease in the reaction exothermicity,thus resulting in the existence of flammability limits of x=3.6 and y=2.75 for the SHS reactions.Based on combustion wave kinetics,the activation energies of Ea=97.1 and 101.1 kJ/mol are deduced for the metallothermic SHS reactions.XRD analyses confirm in situ formation of FeAl/TiB2/Al2O3 and FeAl/TiC/Al2O3 composites.SEM micrographs exhibit that FeAl is formed with a dense polycrystalline structure,and the ceramic phases,TiB2,TiC,and Al2O3,are micro-sized discrete particles.The synthesized FeAl−TiB2−Al2O3 and FeAl−TiC−Al2O3 composites exhibit the hardness ranging from 12.8 to 16.6 GPa and fracture toughness from 7.93 to 9.84 MPa·m1/2.展开更多
Dry sliding wear behaviour of stir-cast aluminium matrix composites(AMCs)containing LM13 alloy as matrix and ceramic particles as reinforcement was investigated.Two different ceramic particle reinforcements were used ...Dry sliding wear behaviour of stir-cast aluminium matrix composites(AMCs)containing LM13 alloy as matrix and ceramic particles as reinforcement was investigated.Two different ceramic particle reinforcements were used separately:synthetic ceramic particles(B_(4)C),and natural ceramic particles(ilmenite).Optical micrographs showed uniform dispersion of reinforced particles in the matrix material.Reinforced particles refined the grain size of eutectic silicon and changed its morphology to globular type.B_(4)C reinforced composites(BRCs)showed maximum improvement in hardness of AMCs.Ilmenite reinforced composites(IRCs)showed maximum reduction in coefficient of friction values due to strong matrix−reinforcement interfacial bonding caused by the formation of interfacial compounds.Dry sliding wear behaviour of composites was significantly improved as compared to base alloy.The low density and high hardness of B_(4)C particles resulted in high dislocation density around filler particles in BRCs.On the other hand,the low thermal conductivity of ilmenite particles resulted in early oxidation and formation of a tribo-layer on surface of IRCs.So,both types of reinforcements led to the improvement in wear properties of AMCs,though the mechanisms involved were very different.Thus,the low-cost ilmenite particles can be used as alternative fillers to the high-cost B_(4)C particles for processing of wear resistant composites.展开更多
Chemical reactions and fate of the toxins of Bacillus thuringiensis （Bt） in the soil environment are causing increasing concerns due to the large-scale cultivation of transgenic Bt plants. In this study, the effect ...Chemical reactions and fate of the toxins of Bacillus thuringiensis （Bt） in the soil environment are causing increasing concerns due to the large-scale cultivation of transgenic Bt plants. In this study, the effect of ionic strength （0-1 000 mmol kg-1） adjusted by NaCl or CaCl2 on adsorption of Bt toxin by a lateritic red soil, a paddy soil and these soils after chemical removal of organic-bound or free Fe and Al oxides, as well as by pure minerals （goethite, hematite and gibbsite） which are widespread in these soils, were studied. The results indicated that when the supporting electrolyte was NaCl, the adsorption of Bt toxin by the lateritic red soil and paddy soil increased rapidly until the ionic strength reached 250 mmol kg-1 and then gradually slowed down with the increase of ionic strength; while in ease the supporting electrolyte was CaCl2, the adsorption of Bt toxin enhanced significantly at low ionic strength （〈 10 mmol kg-1） and then decreased as the ionic strength increased. The adsorption of Bt toxin by the tested minerals and soils after the removal of organic-bound or free Fe and Al oxides also increased with increasing ionic strength controlled by NaCl. Removing organic-bound Fe and Al oxides obviously increased the adsorption of Bt toxin in the tested soils. Differently, removing free Fe and Al oxides increased the Bt adsorption by the paddy soil, but decreased the adsorption by the lateritic red soil. The study indicated that the varieties of ionic strength and the presence of Ve and Al oxides affected the adsorption of Bt toxin by the soils, which would contribute to the further understanding of the fate of Bt toxin in the soil environment and provide references for the ecological risk assessment of transgenic Bt plants.展开更多
文摘Combustion synthesis involving metallothermic reduction of Fe2O3 and TiO2 was conducted in the mode of self-propagating high-temperature synthesis(SHS)to fabricate FeAl-based composites with dual ceramic phases,TiB2/Al2O3 and TiC/Al2O3.The reactant mixture included thermite reagents of 0.6Fe2O3+0.6TiO2+2Al,and elemental Fe,Al,boron,and carbon powders.The formation of xFeAl−0.6TiB2−Al2O3 composites with x=2.0−3.6 and yFeAl−0.6TiC−Al2O3 composites with y=1.8−2.75 was studied.The increase of FeAl causes a decrease in the reaction exothermicity,thus resulting in the existence of flammability limits of x=3.6 and y=2.75 for the SHS reactions.Based on combustion wave kinetics,the activation energies of Ea=97.1 and 101.1 kJ/mol are deduced for the metallothermic SHS reactions.XRD analyses confirm in situ formation of FeAl/TiB2/Al2O3 and FeAl/TiC/Al2O3 composites.SEM micrographs exhibit that FeAl is formed with a dense polycrystalline structure,and the ceramic phases,TiB2,TiC,and Al2O3,are micro-sized discrete particles.The synthesized FeAl−TiB2−Al2O3 and FeAl−TiC−Al2O3 composites exhibit the hardness ranging from 12.8 to 16.6 GPa and fracture toughness from 7.93 to 9.84 MPa·m1/2.
文摘Dry sliding wear behaviour of stir-cast aluminium matrix composites(AMCs)containing LM13 alloy as matrix and ceramic particles as reinforcement was investigated.Two different ceramic particle reinforcements were used separately:synthetic ceramic particles(B_(4)C),and natural ceramic particles(ilmenite).Optical micrographs showed uniform dispersion of reinforced particles in the matrix material.Reinforced particles refined the grain size of eutectic silicon and changed its morphology to globular type.B_(4)C reinforced composites(BRCs)showed maximum improvement in hardness of AMCs.Ilmenite reinforced composites(IRCs)showed maximum reduction in coefficient of friction values due to strong matrix−reinforcement interfacial bonding caused by the formation of interfacial compounds.Dry sliding wear behaviour of composites was significantly improved as compared to base alloy.The low density and high hardness of B_(4)C particles resulted in high dislocation density around filler particles in BRCs.On the other hand,the low thermal conductivity of ilmenite particles resulted in early oxidation and formation of a tribo-layer on surface of IRCs.So,both types of reinforcements led to the improvement in wear properties of AMCs,though the mechanisms involved were very different.Thus,the low-cost ilmenite particles can be used as alternative fillers to the high-cost B_(4)C particles for processing of wear resistant composites.
基金Supported by the National Natural Science Foundation of China (Nos. 41001140 and 40671087)
文摘Chemical reactions and fate of the toxins of Bacillus thuringiensis （Bt） in the soil environment are causing increasing concerns due to the large-scale cultivation of transgenic Bt plants. In this study, the effect of ionic strength （0-1 000 mmol kg-1） adjusted by NaCl or CaCl2 on adsorption of Bt toxin by a lateritic red soil, a paddy soil and these soils after chemical removal of organic-bound or free Fe and Al oxides, as well as by pure minerals （goethite, hematite and gibbsite） which are widespread in these soils, were studied. The results indicated that when the supporting electrolyte was NaCl, the adsorption of Bt toxin by the lateritic red soil and paddy soil increased rapidly until the ionic strength reached 250 mmol kg-1 and then gradually slowed down with the increase of ionic strength; while in ease the supporting electrolyte was CaCl2, the adsorption of Bt toxin enhanced significantly at low ionic strength （〈 10 mmol kg-1） and then decreased as the ionic strength increased. The adsorption of Bt toxin by the tested minerals and soils after the removal of organic-bound or free Fe and Al oxides also increased with increasing ionic strength controlled by NaCl. Removing organic-bound Fe and Al oxides obviously increased the adsorption of Bt toxin in the tested soils. Differently, removing free Fe and Al oxides increased the Bt adsorption by the paddy soil, but decreased the adsorption by the lateritic red soil. The study indicated that the varieties of ionic strength and the presence of Ve and Al oxides affected the adsorption of Bt toxin by the soils, which would contribute to the further understanding of the fate of Bt toxin in the soil environment and provide references for the ecological risk assessment of transgenic Bt plants.
