The depression of pyrite in marmatite flotation by sodium glycerine-xanthate （SGX） was investigated through microflotation, zeta potential and adsorption measurements. The flotation tests of mineral show that in the...The depression of pyrite in marmatite flotation by sodium glycerine-xanthate （SGX） was investigated through microflotation, zeta potential and adsorption measurements. The flotation tests of mineral show that in the presence of SGX, marmatite can be activated by Cu^2＋ and shows good flotability, while pyrite cannot be activated and therefore shows poor flotability. At the pH value range from 4 to 11, the flotation selectivity between marmatite and pyrite is obvious when the SGX concentration is below 50 mg/L. The depression mechanism of SGX on sulfide minerals is discussed based on zeta potential and adsorption isotherm. Zeta potential measurement demonstrates that in the presence of Cu^2＋, SGX can strongly adsorb on the surface of pyrite, while it cannot adsorb on the surface of marmatite. The results of adsorption isotherms show that the adsorption density of SGX on pyrite is greater.展开更多
The population of surface broken bonds of some typical sulfide, oxide and salt-type minerals which may belong to cubic, tetragonal, hexagonal, or orthorhombic system, were calculated. In terms of the calculation resul...The population of surface broken bonds of some typical sulfide, oxide and salt-type minerals which may belong to cubic, tetragonal, hexagonal, or orthorhombic system, were calculated. In terms of the calculation results, the cleavage natures of these minerals were analyzed, and the relationship between surface broken bonds density and surface energy was also established. The results show that the surface broken bonds properties could be used to predict the cleavage nature of most of minerals, and the predicted cleavage planes agree well with those reported in previous literature. Moreover, this work explored a rule that, surface broken bonds density is directly related to surface energy with determination coefficient（R2） of over 0.8, indicating that the former is a dominant factor to determine the latter. Therefore, anisotropic surface broken bonds density can be used to predict the stability of mineral surface and the reactivity of surface atoms.展开更多
Zinc ferrite is the principal constituent in zinc neutral-leach residue（NLR） which is commonly treated by hot-acid leaching in electrolytic zinc plants. Reductive leaching of zinc ferrite with sphalerite concentrate...Zinc ferrite is the principal constituent in zinc neutral-leach residue（NLR） which is commonly treated by hot-acid leaching in electrolytic zinc plants. Reductive leaching of zinc ferrite with sphalerite concentrate as a reducing agent was performed. It was found that leaching of zinc ferrite in the presence of sphalerit concentrate was a viable process that effectively extracted zinc and indium and converted Fe^3＋ into Fe^2＋ at the same time. Reflux leaching tests by two stages were performed to achieve extractions of 98.1% for zinc and 97.5% for indium, and a Fe^2＋/Fe^3＋ molar ratio of 9.6 in leach solution was also obtained. The leaching behaviors of other elements, such as iron, copper and tin were also studied. The results showed that iron and copper were completely leached, whereas tin presented lower extraction values.展开更多
基金Project (50774094) supported by the National Natural Science Foundation of China
文摘The depression of pyrite in marmatite flotation by sodium glycerine-xanthate （SGX） was investigated through microflotation, zeta potential and adsorption measurements. The flotation tests of mineral show that in the presence of SGX, marmatite can be activated by Cu^2＋ and shows good flotability, while pyrite cannot be activated and therefore shows poor flotability. At the pH value range from 4 to 11, the flotation selectivity between marmatite and pyrite is obvious when the SGX concentration is below 50 mg/L. The depression mechanism of SGX on sulfide minerals is discussed based on zeta potential and adsorption isotherm. Zeta potential measurement demonstrates that in the presence of Cu^2＋, SGX can strongly adsorb on the surface of pyrite, while it cannot adsorb on the surface of marmatite. The results of adsorption isotherms show that the adsorption density of SGX on pyrite is greater.
基金Project(50831006)supported by the National Natural Science Foundation of ChinaProject(2012BAB10B05)supported by the National Key Technologies R&D Program of China
文摘The population of surface broken bonds of some typical sulfide, oxide and salt-type minerals which may belong to cubic, tetragonal, hexagonal, or orthorhombic system, were calculated. In terms of the calculation results, the cleavage natures of these minerals were analyzed, and the relationship between surface broken bonds density and surface energy was also established. The results show that the surface broken bonds properties could be used to predict the cleavage nature of most of minerals, and the predicted cleavage planes agree well with those reported in previous literature. Moreover, this work explored a rule that, surface broken bonds density is directly related to surface energy with determination coefficient（R2） of over 0.8, indicating that the former is a dominant factor to determine the latter. Therefore, anisotropic surface broken bonds density can be used to predict the stability of mineral surface and the reactivity of surface atoms.
基金Project(2014CB643404)supported by the National Basic Research Program of ChinaProjects(51564030,51474117,51304093,51364022)supported by the National Natural Science Foundation of China+1 种基金Project(0120150070)supported by Yunnan Applied Basic Reach Project,ChinaProject(ZD2014003)supported by the Education Department of Yunnan Province,China
文摘Zinc ferrite is the principal constituent in zinc neutral-leach residue（NLR） which is commonly treated by hot-acid leaching in electrolytic zinc plants. Reductive leaching of zinc ferrite with sphalerite concentrate as a reducing agent was performed. It was found that leaching of zinc ferrite in the presence of sphalerit concentrate was a viable process that effectively extracted zinc and indium and converted Fe^3＋ into Fe^2＋ at the same time. Reflux leaching tests by two stages were performed to achieve extractions of 98.1% for zinc and 97.5% for indium, and a Fe^2＋/Fe^3＋ molar ratio of 9.6 in leach solution was also obtained. The leaching behaviors of other elements, such as iron, copper and tin were also studied. The results showed that iron and copper were completely leached, whereas tin presented lower extraction values.
