CoCu/TiO_2 catalysts promoted using alkali metals（Li, Na, K, Rb, and Cs） were prepared by the homogeneous deposition-precipitation method followed by the incipient wetness impregnation method. The influences of the ...CoCu/TiO_2 catalysts promoted using alkali metals（Li, Na, K, Rb, and Cs） were prepared by the homogeneous deposition-precipitation method followed by the incipient wetness impregnation method. The influences of the alkali metals on the physicochemical properties of the CoCu/TiO_2 catalysts and the catalytic performance for CO_2 hydrogenation to long-chain hydrocarbons（C_（5＋））were investigated in this work. According to the characterization of the catalysts based on X-ray photoelectron spectroscopy, X-ray diffraction, CO_2 temperature-programmed desorption（TPD）, and H_2-TPD, the introduction of alkali metals could increase the CO_2 adsorption and decrease the H_2 chemisorption, which could suppress the formation of CH_4, enhance the production of C_（5＋）, and decrease the hydrogenation activity. Among all the promoters, the Na-modified CoCu/TiO_2 catalyst provided the maximum C_（5＋） yield of 5.4%, with a CO_2 conversion of 18.4% and C_（5＋） selectivity of42.1%, because it showed the strongest basicity and a slight decrease in the amount of H_2 desorption;it also exhibited excellent catalytic stability of more than 200 h.展开更多
Adsorption, surface reaction and process dynamics on the surface of a commercial copper-based catalyst for methanol synthesis from CO/CO2/H2 were systematically studied by means of temperature programmed desorption (T...Adsorption, surface reaction and process dynamics on the surface of a commercial copper-based catalyst for methanol synthesis from CO/CO2/H2 were systematically studied by means of temperature programmed desorption (TPD), temperature programmed surface reaction (TPSR), in-situ Fourier transform-inferred spec-troscopy(FTIR) and stimulus-response techniques. As a part of results, an elementary step sequence was suggested and a group of ordinary differential equations (ODEs) for describing transient conversations relevant to all species on the catalyst surface and in the gas phase in a micro-fixed-bed reactor was derived. The values of the parameters referred to dynamic kinetics were estimated by fitting the solution of the ODEs with the transient response data obtained by the stimulus-response technique with a FTIR analyzer as an on-line detector.展开更多
文摘CoCu/TiO_2 catalysts promoted using alkali metals（Li, Na, K, Rb, and Cs） were prepared by the homogeneous deposition-precipitation method followed by the incipient wetness impregnation method. The influences of the alkali metals on the physicochemical properties of the CoCu/TiO_2 catalysts and the catalytic performance for CO_2 hydrogenation to long-chain hydrocarbons（C_（5＋））were investigated in this work. According to the characterization of the catalysts based on X-ray photoelectron spectroscopy, X-ray diffraction, CO_2 temperature-programmed desorption（TPD）, and H_2-TPD, the introduction of alkali metals could increase the CO_2 adsorption and decrease the H_2 chemisorption, which could suppress the formation of CH_4, enhance the production of C_（5＋）, and decrease the hydrogenation activity. Among all the promoters, the Na-modified CoCu/TiO_2 catalyst provided the maximum C_（5＋） yield of 5.4%, with a CO_2 conversion of 18.4% and C_（5＋） selectivity of42.1%, because it showed the strongest basicity and a slight decrease in the amount of H_2 desorption;it also exhibited excellent catalytic stability of more than 200 h.
基金Supported by the National Natural Science Foundation of China(N.29476223) and Ministry of Chemical Industry of China under a contract(No.95-23-01).
文摘Adsorption, surface reaction and process dynamics on the surface of a commercial copper-based catalyst for methanol synthesis from CO/CO2/H2 were systematically studied by means of temperature programmed desorption (TPD), temperature programmed surface reaction (TPSR), in-situ Fourier transform-inferred spec-troscopy(FTIR) and stimulus-response techniques. As a part of results, an elementary step sequence was suggested and a group of ordinary differential equations (ODEs) for describing transient conversations relevant to all species on the catalyst surface and in the gas phase in a micro-fixed-bed reactor was derived. The values of the parameters referred to dynamic kinetics were estimated by fitting the solution of the ODEs with the transient response data obtained by the stimulus-response technique with a FTIR analyzer as an on-line detector.
