Soil samples collected from several acid soils in Guangdong, Fujian, Zhejiang and Anhui provinces of the southern China were employed to characterize the chemical species of aluminum ions in the soils. The proportio...Soil samples collected from several acid soils in Guangdong, Fujian, Zhejiang and Anhui provinces of the southern China were employed to characterize the chemical species of aluminum ions in the soils. The proportion of monomeric inorganic Al to total Al in soil solution was in the range of 19% to 70%, that of monomeric organic Al (Al OM) to total Al ranged from 7.7% to 69%, and that of the acid soluble Al to total Al was generally smaller and was lower than 20% in most of the acid soils studied. The Al OM concentration in soil solution was positively correlated with the content of dissolved organic carbon (DOC) and also affected by the concentration of Al 3+ . The complexes of aluminum with fluoride (Al F) were the predominant forms of inorganic Al, and the proportion of Al F complexes to total inorganic Al increased with pH. Under strongly acid condition, Al 3+ was also a major form of inorganic Al, and the proportion of Al 3+ to total inorganic Al decreased with increasing pH. The proportions of Al OH and Al SO 4 complexes to total inorganic Al were small and were not larger than 10% in the most acid soils. The concentration of inorganic Al in solution depended largely on pH and the concentration of total F in soil solution. The concentrations of Al OM, Al 3+ ,Al F and Al OH complexes in topsoil were higher than those in subsoil and decreased with the increase in soil depth. The chemical species of aluminum ions were influenced by pH. The concentrations of Al OM, Al 3+ , Al F complexes and Al OH complexes decreased with the increase in pH.展开更多
The influence of implantation of N+ions of different energies on the nanostructure of7049Al substrates and the corrosioninhibition of produced Al samples in a3.5%NaCl solution was studied.The X-ray diffraction(XRD)res...The influence of implantation of N+ions of different energies on the nanostructure of7049Al substrates and the corrosioninhibition of produced Al samples in a3.5%NaCl solution was studied.The X-ray diffraction(XRD)results confirmed the formationof AlN as a result of N+ion implantation.The atomic force microscope(AFM)results showed that grains of larger scale are formedby increasing N+energy which can be due to heat accumulation in the sample during implantation causing higher rate of diffusion inthe sample,hence decreasing the number of defects.Corrosion resistance of the samples was studied by the electrochemicalimpedance spectroscopy(EIS)measurements.Results showed that corrosion resistance of implanted Al increases with increasing N+ion energy.The equivalent circuits for the N+implanted Al samples with different energies were obtained,using the EIS data whichshowed strong dependence of the equivalent circuit elements on the surface morphology of the samples.Finally,the relationshipbetween corrosion inhibition and equivalent circuit elements was investigated.展开更多
Four acrylamide polymer flocculants, anionic polyacrylamide P（AA-co-AM）, cationic poly- acrylamide P（DMB-co-AM）, nonionic polyacrylamide P（AM）, and hydrophobical polyacry- lamide P（OA-co-AM） have been prepared...Four acrylamide polymer flocculants, anionic polyacrylamide P（AA-co-AM）, cationic poly- acrylamide P（DMB-co-AM）, nonionic polyacrylamide P（AM）, and hydrophobical polyacry- lamide P（OA-co-AM） have been prepared by copolymerizing with acrylic acid, cationic monomer dimethylethyl （acryloxyethyl） ammonium bromide （DMB） and hydrophobical monomer octadecyl acrylate with acrylamide. The interactions between the flocculants with the （012） surface of alumina crystal （A1203） have been simulated by molecular dynamics method. All the polymers can bind tightly with A1203 crystal, the interaction between the O of polymers and A1 of the （012） surface of A1203 is significantly strong. The order of binding energy is as follows： P（DMB-co-AM）〉P（OA-co-AM）〉P（AA-co-AM）〉P（AM）, implying a better flocculation performance of P（DMB-co-AM） than the others. Analy- sis indicates that binding energy is mainly determined by Coulomb interaction. Bonds are found between the O atoms of the polymers and the A1 atoms of A1203. The poly- mers＇ structures deform when they combine with A1203 crystal, but the deformation en- ergies are low and far less than non-bonding energies. Flocculation experiments in sus- pension medium of l%Kaolin show a transmittancy of 90.8% for 6 mg/L P（DMB-co-AM） and 73.0% for P（AM）. The sequence of flocculation performance of four polymers is P（DMB-co-AM）〉P（OA-co-AM）〉P（AA-co-AM）〉P（AM）, which is in excellent agreement with the simulation results of binding energy.展开更多
文摘Soil samples collected from several acid soils in Guangdong, Fujian, Zhejiang and Anhui provinces of the southern China were employed to characterize the chemical species of aluminum ions in the soils. The proportion of monomeric inorganic Al to total Al in soil solution was in the range of 19% to 70%, that of monomeric organic Al (Al OM) to total Al ranged from 7.7% to 69%, and that of the acid soluble Al to total Al was generally smaller and was lower than 20% in most of the acid soils studied. The Al OM concentration in soil solution was positively correlated with the content of dissolved organic carbon (DOC) and also affected by the concentration of Al 3+ . The complexes of aluminum with fluoride (Al F) were the predominant forms of inorganic Al, and the proportion of Al F complexes to total inorganic Al increased with pH. Under strongly acid condition, Al 3+ was also a major form of inorganic Al, and the proportion of Al 3+ to total inorganic Al decreased with increasing pH. The proportions of Al OH and Al SO 4 complexes to total inorganic Al were small and were not larger than 10% in the most acid soils. The concentration of inorganic Al in solution depended largely on pH and the concentration of total F in soil solution. The concentrations of Al OM, Al 3+ ,Al F and Al OH complexes in topsoil were higher than those in subsoil and decreased with the increase in soil depth. The chemical species of aluminum ions were influenced by pH. The concentrations of Al OM, Al 3+ , Al F complexes and Al OH complexes decreased with the increase in pH.
基金University of Tehran and the Iran National Science Foundation(INSF)center of excellence for structural and microscopic properties of matter,Department of Physics,University of Tehran for partial support of this work
文摘The influence of implantation of N+ions of different energies on the nanostructure of7049Al substrates and the corrosioninhibition of produced Al samples in a3.5%NaCl solution was studied.The X-ray diffraction(XRD)results confirmed the formationof AlN as a result of N+ion implantation.The atomic force microscope(AFM)results showed that grains of larger scale are formedby increasing N+energy which can be due to heat accumulation in the sample during implantation causing higher rate of diffusion inthe sample,hence decreasing the number of defects.Corrosion resistance of the samples was studied by the electrochemicalimpedance spectroscopy(EIS)measurements.Results showed that corrosion resistance of implanted Al increases with increasing N+ion energy.The equivalent circuits for the N+implanted Al samples with different energies were obtained,using the EIS data whichshowed strong dependence of the equivalent circuit elements on the surface morphology of the samples.Finally,the relationshipbetween corrosion inhibition and equivalent circuit elements was investigated.
文摘Four acrylamide polymer flocculants, anionic polyacrylamide P（AA-co-AM）, cationic poly- acrylamide P（DMB-co-AM）, nonionic polyacrylamide P（AM）, and hydrophobical polyacry- lamide P（OA-co-AM） have been prepared by copolymerizing with acrylic acid, cationic monomer dimethylethyl （acryloxyethyl） ammonium bromide （DMB） and hydrophobical monomer octadecyl acrylate with acrylamide. The interactions between the flocculants with the （012） surface of alumina crystal （A1203） have been simulated by molecular dynamics method. All the polymers can bind tightly with A1203 crystal, the interaction between the O of polymers and A1 of the （012） surface of A1203 is significantly strong. The order of binding energy is as follows： P（DMB-co-AM）〉P（OA-co-AM）〉P（AA-co-AM）〉P（AM）, implying a better flocculation performance of P（DMB-co-AM） than the others. Analy- sis indicates that binding energy is mainly determined by Coulomb interaction. Bonds are found between the O atoms of the polymers and the A1 atoms of A1203. The poly- mers＇ structures deform when they combine with A1203 crystal, but the deformation en- ergies are low and far less than non-bonding energies. Flocculation experiments in sus- pension medium of l%Kaolin show a transmittancy of 90.8% for 6 mg/L P（DMB-co-AM） and 73.0% for P（AM）. The sequence of flocculation performance of four polymers is P（DMB-co-AM）〉P（OA-co-AM）〉P（AA-co-AM）〉P（AM）, which is in excellent agreement with the simulation results of binding energy.
