期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
铝稳定体卢瑟福缆剩余电阻率的测量
1
作者 佟新宇 赵玲 +5 位作者 孙淑凤 谢宗泰 王立 朱自安 刘旭洋 王美芬 《低温工程》 CAS CSCD 北大核心 2018年第5期39-44,共6页
介绍了铝稳定体卢瑟福缆的测量背景。对比了目前测量金属剩余电阻率的3种方法,确定测量电缆使用定点法和曲线法。通过实验,得出国产化的铝稳定体卢瑟福缆中,铝的剩余电阻率为380,制作超导线所用高纯铜的剩余电阻率(RRR,Residual Resista... 介绍了铝稳定体卢瑟福缆的测量背景。对比了目前测量金属剩余电阻率的3种方法,确定测量电缆使用定点法和曲线法。通过实验,得出国产化的铝稳定体卢瑟福缆中,铝的剩余电阻率为380,制作超导线所用高纯铜的剩余电阻率(RRR,Residual Resistance Ratio)值为256,未绞缆的NbTi/Cu超导线的RRR值为177,绞缆后超导线的RRR值为110,比未绞缆的超导线RRR值降低了67,而覆铝后超导线的RRR值会增加到220。超导线的RRR值已达要求,而铝的RRR值还比较低,与国际领先水平还有较大差距,下一步的重点是改进覆铝工艺,以提升其RRR值。 展开更多
关键词 铝稳定体 卢瑟福缆 剩余电阻率 定点法 曲线法
下载PDF
二代高温超导带材耐高温性能研究 被引量:1
2
作者 乔奇 王梦琳 +5 位作者 裴亚田 李道政 尹少武 赵玲 朱自安 宁飞鹏 《核聚变与等离子体物理》 CAS CSCD 北大核心 2022年第S01期97-101,共5页
通过有限元软件对由20层高温超导带材所制成的超导叠带在覆铝时的温度分布进行模拟,模拟结果表明在覆铝过程中两侧带材均会经历420℃以上的高温。对几种高温超导带材在不同温度和持续时间下,对其ReBCO侧、哈氏合金侧和双侧分别加热进行... 通过有限元软件对由20层高温超导带材所制成的超导叠带在覆铝时的温度分布进行模拟,模拟结果表明在覆铝过程中两侧带材均会经历420℃以上的高温。对几种高温超导带材在不同温度和持续时间下,对其ReBCO侧、哈氏合金侧和双侧分别加热进行高温实验,测试得出了各带材临界电流的退化情况。实验结果表明,高温对带材造成了性能退化,不同样品的带材性能退化程度不同。 展开更多
关键词 铝稳定体高温超导叠型电缆 高温超导 电流退化 耐高温性能
下载PDF
Soil Aggregate Stability and Iron and Aluminium Oxide Contents Under Different Fertiliser Treatments in a Long-Term Solar Greenhouse Experiment 被引量:11
3
作者 YIN Yan WANG Li +3 位作者 LIANG Chenghua XI Fengming PEI Zhongjian DU Liyu 《Pedosphere》 SCIE CAS CSCD 2016年第5期760-767,共8页
Soil in greenhouses is likely to suffer a gradual decline in aggregate stability. Determination of the effects of different fertiliser practices on soil aggregate stability is important for taking advantage of solar g... Soil in greenhouses is likely to suffer a gradual decline in aggregate stability. Determination of the effects of different fertiliser practices on soil aggregate stability is important for taking advantage of solar greenhouses. Soil aggregate stability and iron (Fe) and aluminium (A1) oxide contents were investigated in a 26-year long-term fertilisation experiment in greenhouse in Shenyang, China, under eight fertiliser treatments: manure (M), fertiliser N (FN), fertiliser N with manure (MN), fertiliser P (FP), fertiliser P with manure (MP), fertiliser NP (FNP), fertiliser NP with manure (MNP), and control without any fertiliser (CK). A wet sieving method was used to determine aggregate size distribution and water-stable aggregates (WSA), mean weight diameter and geometric mean diameter as the indices of soil aggregate stability. Different fertiliser treatments had a statistically significant influence on aggregate stability and Fe and A1 oxide contents. Long-term application of inorganic fertilisers had no obvious effects on the mass proportion of aggregates. By contrast, manure application significantly increased the mass proportion of macroaggregates at the expense of microaggregates. All treatments, with the exception of FNP, significantly increased the stability of macroaggregates but decreased that of microaggregates when compared with CK. Aggregation under MP and MN was better than that under M and MNP; however, no significant differences were found among inorganic fertiliser treatments (i.e., FN, FP, and FNP). A positive relation was found between pyrophosphate-extractable Fe and WSA (r=0.269), but no significant relations were observed between other Fe and Al oxides and aggregate stability. 展开更多
关键词 geometric mean diameter manure application mean weight diameter soil fertility soil structure water-stable aggregate
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部