Copper and arsenic in acidic wastewater were separated by cascade sulfidation followed by replacement of arsenic in theprecipitates by copper in the solution which was realized by recycling precipitates obtained in th...Copper and arsenic in acidic wastewater were separated by cascade sulfidation followed by replacement of arsenic in theprecipitates by copper in the solution which was realized by recycling precipitates obtained in the first stage into the initial solution.The effects of reaction time,temperature and H2S dosage on copper and arsenic removal efficiencies as well as the effects of solid-toliquidratio,time and temperature on the replacement of arsenic by copper were investigated.With20mmol/L H2S at50°C within0.5min,more than80%copper and nearly20%arsenic were precipitated.The separation efficiencies of copper and arsenic werehigher than99%by the replacement reaction between arsenic and copper ions when solid-to-liquid ratio was more than10%at20°Cwithin10min.CuS was the main phases in precipitate in which copper content was63.38%in mass fraction.展开更多
Cu-Cr-O nanocomposites that can be used as additives for the catalytic combustion of AP(ammonium perchlorate)-based solid-state propellants were synthesized via a citric acid(CA) complexing approach. Techniques of TG-...Cu-Cr-O nanocomposites that can be used as additives for the catalytic combustion of AP(ammonium perchlorate)-based solid-state propellants were synthesized via a citric acid(CA) complexing approach. Techniques of TG-DTA, XRD as well as TEM were employed to characterize the thermal decomposition procedure, crystal phase, micro-structural morphologies and grain size of the as-synthesized materials respectively. The results show that well-crystallized Cu-Cr-O nanocomposites can be produced after the CA-Cu-Cr precursors are calcined at 500 ℃ for 3 h. Phase composition of the as-obtained Cu-Cr-O nanocomposites depends on the molar ratio of Cu to Cr in the starting reactants. Addition of the as-synthesized Cu-Cr-O nanocomposites as catalysts enhances the burning rate as well as lowers the pressure exponent of the AP-based solid-state propellants considerably. Noticeably, catalyst with a CuCr molar ratio of 0.7 exhibits promising catalytic activity with high burning rate and low pressure exponent at all pressures, due to the effective phase interaction between the spinel CuCr2O4 and delafossite CuCrO2 contained in the as-synthesized Cu-Cr-O nanocomposites.展开更多
The heat recovery steam generator(HRSG)of copper smelting generates a large number of arsenic−coppercontaining particles,and the in-situ separation of arsenic and copper is of importance for cutting off environmental ...The heat recovery steam generator(HRSG)of copper smelting generates a large number of arsenic−coppercontaining particles,and the in-situ separation of arsenic and copper is of importance for cutting off environmental risk and realizing resource recovery.The formation of arsenic−copper-containing particles was simulated,the method of in-situ decomposition of arsenic−copper-containing particles by pyrite was proposed,and the decomposition mechanism was confirmed.It was found that particles with high arsenic content were formed in the simulated HRSG,and copper arsenate was liable for the high arsenic content.Pyrite promoted the sulfation of copper,leading to the in-situ decomposition of copper arsenate.In this process,gaseous arsenic was released,and thus the separation of arsenic and copper was realized.展开更多
The solid sodium hydroxide neutralized acidic As-containing wastewater till pH value was 6. Green copper arsenite was prepared after copper sulfate was added into the neutralized wastewater when the molar ratio of Cu ...The solid sodium hydroxide neutralized acidic As-containing wastewater till pH value was 6. Green copper arsenite was prepared after copper sulfate was added into the neutralized wastewater when the molar ratio of Cu to As was 2：1 and pH value of the neutralized wastewater was adjusted to 8.0 by sodium hydroxide. The arsenious acid solution and red residue were produced after copper arsenite mixed with water according to the ratio of liquid to solid of 4：1 and copper arsenite was reduced by SO2 at 60℃ for 1 h. The white powder was gained after the arsenious acid solution was evaporated and cooled. Copper sulfate solution was obtained after the red residue was leached by H2SO4 solution under the action of air. The results show that red residue is Cu3（SO3）2·2H2O and the white powder is As2O3. The leaching rate of Cu reaches 99.00% when the leaching time is 1.5 h, molar ratio of H2SO4 to Cu is 1.70, H2SO4 concentration is 24% and the leaching temperature is 80 ℃. The direct recovery rate of copper sulfate is 79.11% and the content of CuSOa·5H2O is up to 98.33% in the product after evaporating and cooling the copper sulfate solution.展开更多
Antioxidant and anti-inflammatory therapy approaches have been in the focus of attention in the treatment of different cancer diseases where oxidative stress has been implicated. Succinic acid has been previously repo...Antioxidant and anti-inflammatory therapy approaches have been in the focus of attention in the treatment of different cancer diseases where oxidative stress has been implicated. Succinic acid has been previously reported to possess radical scavenger, iron chelating and anti-inflammatory properties in the mouse fibroblast. The purpose of this study was to investigate potential therapeutic effects of succinic acid and possible signal pathway involved in the mouse fibroblast. We demonstrated highly potent antioxidant-radical scavenging activities of succinic acid.展开更多
基金Projects(51304251,51504299)supported by the National Natural Science Foundation of ChinaProject(201509050)+1 种基金supported by Special Program on Environmental Protection for Public Welfare,ChinaProject(k1502037-31)supported by Key Project of Changsha,China
文摘Copper and arsenic in acidic wastewater were separated by cascade sulfidation followed by replacement of arsenic in theprecipitates by copper in the solution which was realized by recycling precipitates obtained in the first stage into the initial solution.The effects of reaction time,temperature and H2S dosage on copper and arsenic removal efficiencies as well as the effects of solid-toliquidratio,time and temperature on the replacement of arsenic by copper were investigated.With20mmol/L H2S at50°C within0.5min,more than80%copper and nearly20%arsenic were precipitated.The separation efficiencies of copper and arsenic werehigher than99%by the replacement reaction between arsenic and copper ions when solid-to-liquid ratio was more than10%at20°Cwithin10min.CuS was the main phases in precipitate in which copper content was63.38%in mass fraction.
基金Project (2003AA305820) supported by the National High-Tech Research and Development Program of ChinaProject(2006) supported by the Postdoctoral Foundation of Central South University, China
文摘Cu-Cr-O nanocomposites that can be used as additives for the catalytic combustion of AP(ammonium perchlorate)-based solid-state propellants were synthesized via a citric acid(CA) complexing approach. Techniques of TG-DTA, XRD as well as TEM were employed to characterize the thermal decomposition procedure, crystal phase, micro-structural morphologies and grain size of the as-synthesized materials respectively. The results show that well-crystallized Cu-Cr-O nanocomposites can be produced after the CA-Cu-Cr precursors are calcined at 500 ℃ for 3 h. Phase composition of the as-obtained Cu-Cr-O nanocomposites depends on the molar ratio of Cu to Cr in the starting reactants. Addition of the as-synthesized Cu-Cr-O nanocomposites as catalysts enhances the burning rate as well as lowers the pressure exponent of the AP-based solid-state propellants considerably. Noticeably, catalyst with a CuCr molar ratio of 0.7 exhibits promising catalytic activity with high burning rate and low pressure exponent at all pressures, due to the effective phase interaction between the spinel CuCr2O4 and delafossite CuCrO2 contained in the as-synthesized Cu-Cr-O nanocomposites.
基金financially supported by the National Science Fund for Excellent Young Scholars of China(No.52022111)the National Key Research and Development Program of China(Nos.2017YFC0210401,2018YFC1900306)+1 种基金the Distinguished Young Scholars of China(No.51825403)the National Natural Science Foundation of China(Nos.51634010,51974379).
文摘The heat recovery steam generator(HRSG)of copper smelting generates a large number of arsenic−coppercontaining particles,and the in-situ separation of arsenic and copper is of importance for cutting off environmental risk and realizing resource recovery.The formation of arsenic−copper-containing particles was simulated,the method of in-situ decomposition of arsenic−copper-containing particles by pyrite was proposed,and the decomposition mechanism was confirmed.It was found that particles with high arsenic content were formed in the simulated HRSG,and copper arsenate was liable for the high arsenic content.Pyrite promoted the sulfation of copper,leading to the in-situ decomposition of copper arsenate.In this process,gaseous arsenic was released,and thus the separation of arsenic and copper was realized.
文摘The solid sodium hydroxide neutralized acidic As-containing wastewater till pH value was 6. Green copper arsenite was prepared after copper sulfate was added into the neutralized wastewater when the molar ratio of Cu to As was 2：1 and pH value of the neutralized wastewater was adjusted to 8.0 by sodium hydroxide. The arsenious acid solution and red residue were produced after copper arsenite mixed with water according to the ratio of liquid to solid of 4：1 and copper arsenite was reduced by SO2 at 60℃ for 1 h. The white powder was gained after the arsenious acid solution was evaporated and cooled. Copper sulfate solution was obtained after the red residue was leached by H2SO4 solution under the action of air. The results show that red residue is Cu3（SO3）2·2H2O and the white powder is As2O3. The leaching rate of Cu reaches 99.00% when the leaching time is 1.5 h, molar ratio of H2SO4 to Cu is 1.70, H2SO4 concentration is 24% and the leaching temperature is 80 ℃. The direct recovery rate of copper sulfate is 79.11% and the content of CuSOa·5H2O is up to 98.33% in the product after evaporating and cooling the copper sulfate solution.
文摘Antioxidant and anti-inflammatory therapy approaches have been in the focus of attention in the treatment of different cancer diseases where oxidative stress has been implicated. Succinic acid has been previously reported to possess radical scavenger, iron chelating and anti-inflammatory properties in the mouse fibroblast. The purpose of this study was to investigate potential therapeutic effects of succinic acid and possible signal pathway involved in the mouse fibroblast. We demonstrated highly potent antioxidant-radical scavenging activities of succinic acid.
