针对AOD+LF二步法冶炼304不锈钢冶炼过程,通过分析AOD炉精炼不锈钢脱碳保铬机理,结合75 t AOD工业生产数据,建立了冶炼过程中钢液成分、温度和一氧化碳分压三者之间的定量关系,同时分析冶炼过程各阶段的渣成分,研究不同温度和吹气模式...针对AOD+LF二步法冶炼304不锈钢冶炼过程,通过分析AOD炉精炼不锈钢脱碳保铬机理,结合75 t AOD工业生产数据,建立了冶炼过程中钢液成分、温度和一氧化碳分压三者之间的定量关系,同时分析冶炼过程各阶段的渣成分,研究不同温度和吹气模式下钢液铬烧损情况,提出了优化304不锈钢AOD生产的措施,最终实现钢水窄成分与高效化冶炼。展开更多
The fretting wear behavior of 0Cr20Ni32AlTi alloy was investigated with crossed cylinder contact under 80 N at 300 and 400 °C.Wear scar and debris were analyzed systematically by scanning electron microscopy and ...The fretting wear behavior of 0Cr20Ni32AlTi alloy was investigated with crossed cylinder contact under 80 N at 300 and 400 °C.Wear scar and debris were analyzed systematically by scanning electron microscopy and X-ray photoelectron spectroscopy.The results show that the friction logs are mixed fretting regime and gross slip regime with the magnitudes of displacement of 10 and 20 μm,respectively.Severe wear and friction oxidation occur on the material surface.A large number of granular debris produced in the fretting process can be easily congregated and adhered at the contact zone after repeated crushes.The resultant of friction oxidation is mainly composed of Fe3O4,Fe2O3,Cr2O3 and NiO.Temperature and friction are the major factors affecting the oxidation reaction rate.The fretting friction effect can enhance the oxidation reaction activity of surface atoms of 0Cr20Ni32AlTi alloy and reduce the oxidation activation energy.As result,the oxidation reaction rate is accelerated.展开更多
Defibrator is a very important machine in the wood industry for producing fiberboard. The refiner plates are the key parts of defibrator that directly act with the wood, and broken easily. The working life of the refi...Defibrator is a very important machine in the wood industry for producing fiberboard. The refiner plates are the key parts of defibrator that directly act with the wood, and broken easily. The working life of the refiner plates is of significance to the wood industry. It may affect refining quality, production efficiency, and power consumption. In this paper, the abrasion resistance of the refiner plate made of different materials, the stainless steels and high chromium cast irons, were tested and compared. The results showed that abrasion resistance of refiner plate made of high chromium cast irons was better than that of the stainless steel materials. Although the two kinds of materials have the same compositions, their abrasion resistances have ap-parent difference. The main reason is that the material microstructures have very important effects on their performance. The refiner plates made of developed high chromium cast irons don抰 demand the complex heat treatment. This can simplify the producing process, save the cost of production, decrease labor strength, and increase the production efficiency.展开更多
[Objective] This study aimed to investigate the effect of chromium on ox- idative damage and antioxidant capacity of Ctenopharyngodon idellus （grass carp）. [Method] The grass carps were treated with hexavalent chrom...[Objective] This study aimed to investigate the effect of chromium on ox- idative damage and antioxidant capacity of Ctenopharyngodon idellus （grass carp）. [Method] The grass carps were treated with hexavalent chromium （Cr^6＋） solution at concentrations of 0, 7.23, 14.47, 28.94 mg/L, and then the content of malondialde- hyde （MDA）, the level of total antioxidative capacity （T-AOC） and the activity of gtu- tathione-S-transferase （GST） in the hepatopancreas of grass carp were determined after 96 hours in different treatment groups. [Result] The content of MDA presented increasing trend with the increase of exposure Cr^6＋ concentrations. The activity of T-AOC increased firstly, then decreased with the increasing Cr^6＋ exposure concentra- tions, showing that the level of T-AOC was induced in tow and medium concentrat ions （7.23 and 14.47 mg/L）, but inhibited in high concentrations （28.94 mg/L）. Among the exposure groups, the level of T-AOC in medium concentration group （14.47 mg/L） was significantly higher than the control （P〈0.05）. Except the low concentration groups （7.23 mg/L） of which the GST activity was slightly induced, the GST activities of the other groups all showed downward trend with increasing Cr^6＋ levels, and the activity of GST in 28.94 mg/L group was significantly lower than the control group （P〈0.05）. [Conclusion] Cr^6＋ could cause large oxidative damage in the hepatopancreas of grass carp, thus poisoning it, and Cr^6＋ may further damage the organizational structure and physiological function of grass carp.展开更多
Agricultural production systems are immensely exposed to different environmental stresses in which heavy metal stress receives serious concerns. This study was conducted to explore the deleterious effects of different...Agricultural production systems are immensely exposed to different environmental stresses in which heavy metal stress receives serious concerns. This study was conducted to explore the deleterious effects of different chromium （Cr） stress levels, i.e., O, 30, 60, 90, 120, and 150 μmol L^-1, on two maize genotypes, Wandan 13 and Runnong 35. Both genotypes were evaluated by measuring their growth and yield characteristics, Cr accumulation in different plant tissues, alterations in osmolyte accumulation, generation of reactive oxygen species （ROS）, and anti-oxidative enzyme activity to scavenge ROS. The results showed that Cr stress decreased the leaf area, cob formation, 100-grain weight, shoot fresh biomass, and yield formation, while Cr accumulation in different maize tissues was found in the order of roots 〉 leaves 〉 stem ~ seeds in both genotypes. The increased Cr toxicity resulted in higher free proline, soluble sugars and total phenolic contents, and lower soluble protein contents. However, enhanced lipid peroxidation was noticed in the forms of malondialdehyde, hydrogen peroxide （H2O2） and thiobarbituric acid reactive substance accumulation, and electrolyte leakage. The hyperactivity of superoxide dismutase, peroxidase, catalase, ascorbate peroxidase, especially glutathione peroxidase and glutathione reductase indicated that these anti-oxidative enzymes had a central role in protecting maize from Cr toxicity, especially for Wandan 13. Moreover, higher uptake and less translocation of Cr contents into the grains of Wandan 13 implied its importance as a potential candidate against soil Cr pollution.展开更多
文摘针对AOD+LF二步法冶炼304不锈钢冶炼过程,通过分析AOD炉精炼不锈钢脱碳保铬机理,结合75 t AOD工业生产数据,建立了冶炼过程中钢液成分、温度和一氧化碳分压三者之间的定量关系,同时分析冶炼过程各阶段的渣成分,研究不同温度和吹气模式下钢液铬烧损情况,提出了优化304不锈钢AOD生产的措施,最终实现钢水窄成分与高效化冶炼。
基金Project (51075342) supported by the National Natural Science Foundation of ChinaProject (2007CB714704) supported by the National Basic Research Program of China
文摘The fretting wear behavior of 0Cr20Ni32AlTi alloy was investigated with crossed cylinder contact under 80 N at 300 and 400 °C.Wear scar and debris were analyzed systematically by scanning electron microscopy and X-ray photoelectron spectroscopy.The results show that the friction logs are mixed fretting regime and gross slip regime with the magnitudes of displacement of 10 and 20 μm,respectively.Severe wear and friction oxidation occur on the material surface.A large number of granular debris produced in the fretting process can be easily congregated and adhered at the contact zone after repeated crushes.The resultant of friction oxidation is mainly composed of Fe3O4,Fe2O3,Cr2O3 and NiO.Temperature and friction are the major factors affecting the oxidation reaction rate.The fretting friction effect can enhance the oxidation reaction activity of surface atoms of 0Cr20Ni32AlTi alloy and reduce the oxidation activation energy.As result,the oxidation reaction rate is accelerated.
文摘Defibrator is a very important machine in the wood industry for producing fiberboard. The refiner plates are the key parts of defibrator that directly act with the wood, and broken easily. The working life of the refiner plates is of significance to the wood industry. It may affect refining quality, production efficiency, and power consumption. In this paper, the abrasion resistance of the refiner plate made of different materials, the stainless steels and high chromium cast irons, were tested and compared. The results showed that abrasion resistance of refiner plate made of high chromium cast irons was better than that of the stainless steel materials. Although the two kinds of materials have the same compositions, their abrasion resistances have ap-parent difference. The main reason is that the material microstructures have very important effects on their performance. The refiner plates made of developed high chromium cast irons don抰 demand the complex heat treatment. This can simplify the producing process, save the cost of production, decrease labor strength, and increase the production efficiency.
基金Supported by the National Program on Key Basic Research Project(2010CB134405)the Foundation for Doctors of Southwest University(SWU10903)the Project of China Three Gorges Corporation(CT-11-08-01)~~
文摘[Objective] This study aimed to investigate the effect of chromium on ox- idative damage and antioxidant capacity of Ctenopharyngodon idellus （grass carp）. [Method] The grass carps were treated with hexavalent chromium （Cr^6＋） solution at concentrations of 0, 7.23, 14.47, 28.94 mg/L, and then the content of malondialde- hyde （MDA）, the level of total antioxidative capacity （T-AOC） and the activity of gtu- tathione-S-transferase （GST） in the hepatopancreas of grass carp were determined after 96 hours in different treatment groups. [Result] The content of MDA presented increasing trend with the increase of exposure Cr^6＋ concentrations. The activity of T-AOC increased firstly, then decreased with the increasing Cr^6＋ exposure concentra- tions, showing that the level of T-AOC was induced in tow and medium concentrat ions （7.23 and 14.47 mg/L）, but inhibited in high concentrations （28.94 mg/L）. Among the exposure groups, the level of T-AOC in medium concentration group （14.47 mg/L） was significantly higher than the control （P〈0.05）. Except the low concentration groups （7.23 mg/L） of which the GST activity was slightly induced, the GST activities of the other groups all showed downward trend with increasing Cr^6＋ levels, and the activity of GST in 28.94 mg/L group was significantly lower than the control group （P〈0.05）. [Conclusion] Cr^6＋ could cause large oxidative damage in the hepatopancreas of grass carp, thus poisoning it, and Cr^6＋ may further damage the organizational structure and physiological function of grass carp.
基金supported by the National Natural Science Foundation of China (No. 31271673)the Special Fund for Agro-Scientific Research in the Public Interest of China (No. 201503127)
文摘Agricultural production systems are immensely exposed to different environmental stresses in which heavy metal stress receives serious concerns. This study was conducted to explore the deleterious effects of different chromium （Cr） stress levels, i.e., O, 30, 60, 90, 120, and 150 μmol L^-1, on two maize genotypes, Wandan 13 and Runnong 35. Both genotypes were evaluated by measuring their growth and yield characteristics, Cr accumulation in different plant tissues, alterations in osmolyte accumulation, generation of reactive oxygen species （ROS）, and anti-oxidative enzyme activity to scavenge ROS. The results showed that Cr stress decreased the leaf area, cob formation, 100-grain weight, shoot fresh biomass, and yield formation, while Cr accumulation in different maize tissues was found in the order of roots 〉 leaves 〉 stem ~ seeds in both genotypes. The increased Cr toxicity resulted in higher free proline, soluble sugars and total phenolic contents, and lower soluble protein contents. However, enhanced lipid peroxidation was noticed in the forms of malondialdehyde, hydrogen peroxide （H2O2） and thiobarbituric acid reactive substance accumulation, and electrolyte leakage. The hyperactivity of superoxide dismutase, peroxidase, catalase, ascorbate peroxidase, especially glutathione peroxidase and glutathione reductase indicated that these anti-oxidative enzymes had a central role in protecting maize from Cr toxicity, especially for Wandan 13. Moreover, higher uptake and less translocation of Cr contents into the grains of Wandan 13 implied its importance as a potential candidate against soil Cr pollution.
