The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters we...The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.展开更多
As titanium alloy is chemically reactive,it is very difficult to join by conventional welding techniques.Titanium alloys can easily pick up nitrogen and oxygen from the atmosphere.In the fusion welding method,brittle ...As titanium alloy is chemically reactive,it is very difficult to join by conventional welding techniques.Titanium alloys can easily pick up nitrogen and oxygen from the atmosphere.In the fusion welding method,brittle intermetallic compounds are formed when joining titanium alloy and stainless steel,which decrease the mechanical behavior of the couples.Hence,for joining of titanium alloy,diffusion bonding is recommended.This work dealt with the measurement of feasible process parameters for diffusion bonding of Ti-6Al-4V and AISI 304 stainless steel with silver as an intermediate layer.The quality of the bonds was confirmed by the lap shear test and microstructural analysis.With the experimental results obtained,diffusion bonding windows were constructed and this will act as reference maps to identify the process parameters for obtaining defect free bond.Bonding was successful in the temperature range of 750-800 °C.Maximum lap shear strength was achieved under a bonding pressure of 5 MPa and holding time of 90 min.展开更多
Objective： We evaluated （Whole-Body Diffusion Weighted Imaging, WB-DWl） application in bone metastasis. Methods： WB-DWI with GE 1.5T MR/I was performed on 10 healthy volunteers and 35 patients. WB-DWl and ECT was ...Objective： We evaluated （Whole-Body Diffusion Weighted Imaging, WB-DWl） application in bone metastasis. Methods： WB-DWI with GE 1.5T MR/I was performed on 10 healthy volunteers and 35 patients. WB-DWl and ECT was performed in all 35 patients. Using WB-DWl for detecting bone metastasis and compared them with that of ECT. Results： Background was suppressed in WB-DWl, fat, muscle, vessels and liver appeared same as background. Skeleton showed medium or slightly lower signal. Lymph nodes, some glandular organs, kidneys displayed medium signal. Spleen, testicle, brain tissue were low signal. Bladder, gallbladder were depicted as low signal because of ＂T2 through＂. Bone metastasis were multitude and inequality of size, punctiform, nodosity, column low intensity. Concordance between WB-DWI and ECT was seen in 4 cases. WB-DWl displayed 1 bone metastasis on skull, 46 on rib and sternum, 3 on scapula, 4 on extremities, 83 on vertebral, 36 on pelvic bone. ECT showed 2 bone metastasis on skull, 62 on rib and sternum, 7 on scapula, 9 on extremities, 64 on vertebral, 19 on pelvic bone. WB-DWl was 74% for bone metastasis on rib and sternum, ECT was 77%, 53% for vertebral and pelvic bone. All of the focus were statistics analyses, P 〈 0.05. Total probability distribution inequality if metastasis on different positions. Conclusion： WB-DWI was an effective imaging technology for screening bone metastasis.展开更多
NT build 443, or profile fitting method, is often used to measure the diffusion coefficient of chloride in concrete. However, this method is quite laborious and needs special equipment. Colorimetric method is a quick ...NT build 443, or profile fitting method, is often used to measure the diffusion coefficient of chloride in concrete. However, this method is quite laborious and needs special equipment. Colorimetric method is a quick and simple method to measure the penetration depth of chloride by spraying 0.1 mol/L silver nitrate solution. The objective of this work is to study the possibility of the use of colorimetric method in the calculation of non-steady-state diffusion coefficient. Twelve concrete mixtures with different supplementary cementitious materials and water-to-cement ratios of 0.35, 0.48 and 0.6 were used for study. According to NT build 443, the concrete specimens were immersed in 165 g/L NaC1 （2.8 mol/L） solution for 42 d. Both water-soluble （convert to free chloride） chloride and acid-soluble chloride at different layers of specimens were measured. The results show that the mean value of free chloride concentration at the color change boundary Cd was 0.306 mol/L. The surface free chloride concentration cs was obtained by profile fitting method, which was 40% lower than the chloride concentration of exposure solution after an immersion period of 42 d. Chloride diffusion coefficients obtained by the colorimetric method was not well correlated with those obtained by profile fitting method.展开更多
基金Project (2012CB932800) supported by the National Basic Research Program of ChinaProject (2012M521330) supported by China Postdoctoral Science Foundation
文摘The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.
基金All India Council for Technical Education (AICTE),New Delhi,India,for the financial support rendered under the Grant No:8023/ RID/RID/RPS-76/2010-11
文摘As titanium alloy is chemically reactive,it is very difficult to join by conventional welding techniques.Titanium alloys can easily pick up nitrogen and oxygen from the atmosphere.In the fusion welding method,brittle intermetallic compounds are formed when joining titanium alloy and stainless steel,which decrease the mechanical behavior of the couples.Hence,for joining of titanium alloy,diffusion bonding is recommended.This work dealt with the measurement of feasible process parameters for diffusion bonding of Ti-6Al-4V and AISI 304 stainless steel with silver as an intermediate layer.The quality of the bonds was confirmed by the lap shear test and microstructural analysis.With the experimental results obtained,diffusion bonding windows were constructed and this will act as reference maps to identify the process parameters for obtaining defect free bond.Bonding was successful in the temperature range of 750-800 °C.Maximum lap shear strength was achieved under a bonding pressure of 5 MPa and holding time of 90 min.
文摘Objective： We evaluated （Whole-Body Diffusion Weighted Imaging, WB-DWl） application in bone metastasis. Methods： WB-DWI with GE 1.5T MR/I was performed on 10 healthy volunteers and 35 patients. WB-DWl and ECT was performed in all 35 patients. Using WB-DWl for detecting bone metastasis and compared them with that of ECT. Results： Background was suppressed in WB-DWl, fat, muscle, vessels and liver appeared same as background. Skeleton showed medium or slightly lower signal. Lymph nodes, some glandular organs, kidneys displayed medium signal. Spleen, testicle, brain tissue were low signal. Bladder, gallbladder were depicted as low signal because of ＂T2 through＂. Bone metastasis were multitude and inequality of size, punctiform, nodosity, column low intensity. Concordance between WB-DWI and ECT was seen in 4 cases. WB-DWl displayed 1 bone metastasis on skull, 46 on rib and sternum, 3 on scapula, 4 on extremities, 83 on vertebral, 36 on pelvic bone. ECT showed 2 bone metastasis on skull, 62 on rib and sternum, 7 on scapula, 9 on extremities, 64 on vertebral, 19 on pelvic bone. WB-DWl was 74% for bone metastasis on rib and sternum, ECT was 77%, 53% for vertebral and pelvic bone. All of the focus were statistics analyses, P 〈 0.05. Total probability distribution inequality if metastasis on different positions. Conclusion： WB-DWI was an effective imaging technology for screening bone metastasis.
基金Project(2010QZZD018) supported by Central South Universtiy,China,and Ghent University,Belgium
文摘NT build 443, or profile fitting method, is often used to measure the diffusion coefficient of chloride in concrete. However, this method is quite laborious and needs special equipment. Colorimetric method is a quick and simple method to measure the penetration depth of chloride by spraying 0.1 mol/L silver nitrate solution. The objective of this work is to study the possibility of the use of colorimetric method in the calculation of non-steady-state diffusion coefficient. Twelve concrete mixtures with different supplementary cementitious materials and water-to-cement ratios of 0.35, 0.48 and 0.6 were used for study. According to NT build 443, the concrete specimens were immersed in 165 g/L NaC1 （2.8 mol/L） solution for 42 d. Both water-soluble （convert to free chloride） chloride and acid-soluble chloride at different layers of specimens were measured. The results show that the mean value of free chloride concentration at the color change boundary Cd was 0.306 mol/L. The surface free chloride concentration cs was obtained by profile fitting method, which was 40% lower than the chloride concentration of exposure solution after an immersion period of 42 d. Chloride diffusion coefficients obtained by the colorimetric method was not well correlated with those obtained by profile fitting method.
