The oxidation roasting process of molybdenum concentrate has significant advantages in industrial applications.However,utilization of low-grade mineral has many problems because it is more complex than the standard co...The oxidation roasting process of molybdenum concentrate has significant advantages in industrial applications.However,utilization of low-grade mineral has many problems because it is more complex than the standard concentrate.In this study,the oxidation behaviors of powdery rhenium-bearing low-grade molybdenum concentrate were investigated through thermodynamic calculation,roasting experiments,thermogravimetric analysis,and phase analysis.The results obtained show that oxidation of MoS2 begins at 450℃,and MoO3 reacts with metal-oxide forming molybdate at 600℃.Finally,MoO3 can be dissolved in ammonia with a maximum content of approximately 80%.The volatile speed of Re was considerably slower than the oxidation speed of MoS2 because the nonvolatile products ReO2 and ReO3 were generated in reactions among MoS2,SO2,and Re2O7.The final volatilization rate of Re was almost 70%.This study determined the problems related to the roasting of low-grade molybdenum concentrate,which lays the scientific foundations for subsequent enhancement of molybdenum and rhenium extraction.展开更多
The application of the response surface methodology and the central composite design（CCD） technique for modeling and optimization of the influence of some operating variables on copper,molybdenum and rhenium recover...The application of the response surface methodology and the central composite design（CCD） technique for modeling and optimization of the influence of some operating variables on copper,molybdenum and rhenium recoveries in a bioleaching process was investigated.Three main bioleaching parameters,namely pH,solid concentration and inoculum percent,were changed during the bioleaching tests based on CCD.The ranges of the bioleaching process variables used in the design were as follows：pH1.46-2.14,solid concentration 0.95%-11.05%,and inoculum percent 1.59%-18.41%.A total of 20 bioleaching tests were carried out by the CCD method according to software-based designed matrix.Empirical model equations were developed according to the copper,molybdenum and rhenium recoveries obtained with these three parameters.Model equations of responses at the base of parameters were achieved by using statistical software.The model equations were then individually optimized by using quadratic programming to maximize copper,molybdenum and rhenium recoveries individually within the experimental range.The optimum conditions for copper recovery were pH 1.68,solid concentration 0.95% and the inoculum 18.41%（v/v）,while molybdenum and rhenium recoveries were 2.18% and 24.41%,respectively.The predicted values for copper,molybdenum and rhenium recoveries were found to be in good agreement with the experimental values.Also jarosite formation during bioleaching tests was also investigated.展开更多
基金Projects(U1760107,U1660206)supported by the National Natural Science Foundation of ChinaProject(2013zzts064)supported by the Innovation Foundation for Postgraduate of Central South University,China
文摘The oxidation roasting process of molybdenum concentrate has significant advantages in industrial applications.However,utilization of low-grade mineral has many problems because it is more complex than the standard concentrate.In this study,the oxidation behaviors of powdery rhenium-bearing low-grade molybdenum concentrate were investigated through thermodynamic calculation,roasting experiments,thermogravimetric analysis,and phase analysis.The results obtained show that oxidation of MoS2 begins at 450℃,and MoO3 reacts with metal-oxide forming molybdate at 600℃.Finally,MoO3 can be dissolved in ammonia with a maximum content of approximately 80%.The volatile speed of Re was considerably slower than the oxidation speed of MoS2 because the nonvolatile products ReO2 and ReO3 were generated in reactions among MoS2,SO2,and Re2O7.The final volatilization rate of Re was almost 70%.This study determined the problems related to the roasting of low-grade molybdenum concentrate,which lays the scientific foundations for subsequent enhancement of molybdenum and rhenium extraction.
基金supported by the National Iranian Copper Industry Co. and Geological Survey of Iran
文摘The application of the response surface methodology and the central composite design（CCD） technique for modeling and optimization of the influence of some operating variables on copper,molybdenum and rhenium recoveries in a bioleaching process was investigated.Three main bioleaching parameters,namely pH,solid concentration and inoculum percent,were changed during the bioleaching tests based on CCD.The ranges of the bioleaching process variables used in the design were as follows：pH1.46-2.14,solid concentration 0.95%-11.05%,and inoculum percent 1.59%-18.41%.A total of 20 bioleaching tests were carried out by the CCD method according to software-based designed matrix.Empirical model equations were developed according to the copper,molybdenum and rhenium recoveries obtained with these three parameters.Model equations of responses at the base of parameters were achieved by using statistical software.The model equations were then individually optimized by using quadratic programming to maximize copper,molybdenum and rhenium recoveries individually within the experimental range.The optimum conditions for copper recovery were pH 1.68,solid concentration 0.95% and the inoculum 18.41%（v/v）,while molybdenum and rhenium recoveries were 2.18% and 24.41%,respectively.The predicted values for copper,molybdenum and rhenium recoveries were found to be in good agreement with the experimental values.Also jarosite formation during bioleaching tests was also investigated.
