A new cathode material, LiVPO4F, has been synthesized through two steps of solid-state reactions. In the first step, vanadium pentoxide, ammonium dihydrogen phosphate, and a high surface area carbon were pre-heated at...A new cathode material, LiVPO4F, has been synthesized through two steps of solid-state reactions. In the first step, vanadium pentoxide, ammonium dihydrogen phosphate, and a high surface area carbon were pre-heated at 300 ℃ and reacted at 750 ℃ under an inert atmosphere to yield the trivalent vanadium phosphate VPO4. In the second step, the product LiVPO4F was synthesized by the reaction with VPO4 and LiF. The LiVPO4F was characterized by X-ray diffraction, scanning electron microscopy, cyclic voltammetry and charge/discharge testing measurements. The LiVPO4F is triclinic crystalline system. At 0.1 C rate, the first charge/discharge capacities were 150.1 mAh·g-1 and 132.6 mAh·g-1; At 0.2 C rate, the first charge/discharge capacities were 142.9 mAh·g-1 and 125.2 mAh·g-1. The LiVPO4F from this work has higher charge/discharge voltage 4.3 V and 4.1 V, respectively.展开更多
以 L i2 CO3 和 NH4 VO3 为原料 ,低温合成了 L i1+ x V3 O8.通过对中间产物的热分析 ,选定了低温合成 L i1+ x V3 O8的适宜煅烧温度为 30 0℃ .研究表明 ,L i1+ x V3 O8,原料 L i/ V摩尔比应大于1∶ 3.以 Li1+ x V3 O8作为正极材料 ,...以 L i2 CO3 和 NH4 VO3 为原料 ,低温合成了 L i1+ x V3 O8.通过对中间产物的热分析 ,选定了低温合成 L i1+ x V3 O8的适宜煅烧温度为 30 0℃ .研究表明 ,L i1+ x V3 O8,原料 L i/ V摩尔比应大于1∶ 3.以 Li1+ x V3 O8作为正极材料 ,金属锂为负极组装了模拟电池 ,高、低温合成材料具有较高的放电容量和放电电压 .XRD、SEM分析结果说明低温合成样品的结晶度低、粒径较小 .展开更多
Cathode material LiVPO4Cl for lithium-ion rechargeable batteries was synthesized by one-step hydro-thermal method. The result of XRD measurement shows that LiVPO4Cl material has a triclinic crystal structure,P1 space ...Cathode material LiVPO4Cl for lithium-ion rechargeable batteries was synthesized by one-step hydro-thermal method. The result of XRD measurement shows that LiVPO4Cl material has a triclinic crystal structure,P1 space group; the results of SEM and TEM indicate that the sample is mostly single-crystalline,stick-like material; and the results of charge/discharge testing and cyclic voltammetry measurement demonstrate that the charging plateau of LiVPO4Cl material maintains at 4.02 V and the discharging plateau at 3.86 V. After sufficient activation,the discharge capacity at 0.1C rate of the fortieth cycle of LiVPO4Cl material with relatively higher content of carbon reaches 101 mAh·g-1.展开更多
文摘A new cathode material, LiVPO4F, has been synthesized through two steps of solid-state reactions. In the first step, vanadium pentoxide, ammonium dihydrogen phosphate, and a high surface area carbon were pre-heated at 300 ℃ and reacted at 750 ℃ under an inert atmosphere to yield the trivalent vanadium phosphate VPO4. In the second step, the product LiVPO4F was synthesized by the reaction with VPO4 and LiF. The LiVPO4F was characterized by X-ray diffraction, scanning electron microscopy, cyclic voltammetry and charge/discharge testing measurements. The LiVPO4F is triclinic crystalline system. At 0.1 C rate, the first charge/discharge capacities were 150.1 mAh·g-1 and 132.6 mAh·g-1; At 0.2 C rate, the first charge/discharge capacities were 142.9 mAh·g-1 and 125.2 mAh·g-1. The LiVPO4F from this work has higher charge/discharge voltage 4.3 V and 4.1 V, respectively.
文摘以 L i2 CO3 和 NH4 VO3 为原料 ,低温合成了 L i1+ x V3 O8.通过对中间产物的热分析 ,选定了低温合成 L i1+ x V3 O8的适宜煅烧温度为 30 0℃ .研究表明 ,L i1+ x V3 O8,原料 L i/ V摩尔比应大于1∶ 3.以 Li1+ x V3 O8作为正极材料 ,金属锂为负极组装了模拟电池 ,高、低温合成材料具有较高的放电容量和放电电压 .XRD、SEM分析结果说明低温合成样品的结晶度低、粒径较小 .
文摘Cathode material LiVPO4Cl for lithium-ion rechargeable batteries was synthesized by one-step hydro-thermal method. The result of XRD measurement shows that LiVPO4Cl material has a triclinic crystal structure,P1 space group; the results of SEM and TEM indicate that the sample is mostly single-crystalline,stick-like material; and the results of charge/discharge testing and cyclic voltammetry measurement demonstrate that the charging plateau of LiVPO4Cl material maintains at 4.02 V and the discharging plateau at 3.86 V. After sufficient activation,the discharge capacity at 0.1C rate of the fortieth cycle of LiVPO4Cl material with relatively higher content of carbon reaches 101 mAh·g-1.
