The influence of phosphating bath at different temperatures on the formation and corrosion property of calcium-modified zinc phosphate conversion coating （Zn-Ca-P coating） on Mg-Li-Ca alloy was investigated. The mor...The influence of phosphating bath at different temperatures on the formation and corrosion property of calcium-modified zinc phosphate conversion coating （Zn-Ca-P coating） on Mg-Li-Ca alloy was investigated. The morphologies, elemental distribution and chemical structures of the coatings were examined via SEM, EPMA, EDS, XRD and FT-IR. The corrosion resistance was assessed by hydrogen evolution, potentiodynamic polarization and EIS. The results show that the coating is composed of single element Zn and ZnO at below 45 ℃;whereas the coatings are predominantly characterized by Zn3（PO4）2·4H2O and small amount of element zinc and ZnO at above 50 ℃. Mg-Li-Ca alloy with Zn-Ca-P coatings prepared at 55 ℃ has the highest corrosion resistance. However, the hydrogen evolution rates of the coatings obtained at 40-50 ℃ is accelerated due to the galvanic corrosion between the imperfection of the single element Zn coating and the Mg substrate.展开更多
Perovskite SrVO_(3) has been investigated as a promising lithium storage anode where the V cation plays the role of the redox center,combining excellent cycle stability and safe operating potential versus Li metal pla...Perovskite SrVO_(3) has been investigated as a promising lithium storage anode where the V cation plays the role of the redox center,combining excellent cycle stability and safe operating potential versus Li metal plating,with limited capacity.Here,we demonstrate the possibility to boost the lithium storage properties,by reducing the non-redox active Sr cation content and fine-tuning the O anion vacancies while maintaining a non-stoichiometric Sr_(x)VO_(3-δ) perovskite structure.Theoretical investigations suggest that Sr vacancy can work as favorable Li^(+) storage sites and preferential transport channels for guest Li^(+) ions,contributing to the increased specific capacity and rate performance.In contrast,inducing O anion vacancy in Sr_(x)VO_(3-δ) can improve rate performance while compromising the specific capacity.Our experimental results confirm the enhancement of specific capacities by fine adjusting the Sr and O vacancies,with a maximum capacity of 444 mAh g^(-1) achieved with Sr_(0.63)VO_(3-δ),which is a 37%increase versus stoichiometric SrVO_(3).Although rich defects have been induced,Sr_(x)VO_(3-δ) electrodes maintain a stable perovskite structure during cycling versus a LiFePO_(4) cathode,and the full-cell could achieve more than 6000 discharge/charge cycles with 80%capacity retention.This result highlights the possibility to use the cation defective-based engineering approach to design high-capacity perovskite oxide anode materials.展开更多
基金Project(51241001)supported by the National Natural Science Foundation of ChinaProject(ZR2011EMM004)supported by the Natural Science Foundation of Shandong Province,China+1 种基金Project(SKLCP21012KF03)supported by the Open Foundation of State Key Laboratory for Corrosion and Protection,ChinaProject(TS20110828)supported by Taishan Scholarship Project of Shandong Province,China
文摘The influence of phosphating bath at different temperatures on the formation and corrosion property of calcium-modified zinc phosphate conversion coating （Zn-Ca-P coating） on Mg-Li-Ca alloy was investigated. The morphologies, elemental distribution and chemical structures of the coatings were examined via SEM, EPMA, EDS, XRD and FT-IR. The corrosion resistance was assessed by hydrogen evolution, potentiodynamic polarization and EIS. The results show that the coating is composed of single element Zn and ZnO at below 45 ℃;whereas the coatings are predominantly characterized by Zn3（PO4）2·4H2O and small amount of element zinc and ZnO at above 50 ℃. Mg-Li-Ca alloy with Zn-Ca-P coatings prepared at 55 ℃ has the highest corrosion resistance. However, the hydrogen evolution rates of the coatings obtained at 40-50 ℃ is accelerated due to the galvanic corrosion between the imperfection of the single element Zn coating and the Mg substrate.
基金supported by the National Double First-Class Universities Construction Grant of Sichuan University(2020SCUNG201)the National Natural Science Foundation of China (52072252 and 51902215)+4 种基金Fundamental Research Funds for the Central UniversitiesChina (YJ201886)State Key Laboratory of Polymer Materials EngineeringChina(sklpme2021-JX-01)the Agence Nationale de la Recherche (Labex STORE-EX),France for financial support
文摘Perovskite SrVO_(3) has been investigated as a promising lithium storage anode where the V cation plays the role of the redox center,combining excellent cycle stability and safe operating potential versus Li metal plating,with limited capacity.Here,we demonstrate the possibility to boost the lithium storage properties,by reducing the non-redox active Sr cation content and fine-tuning the O anion vacancies while maintaining a non-stoichiometric Sr_(x)VO_(3-δ) perovskite structure.Theoretical investigations suggest that Sr vacancy can work as favorable Li^(+) storage sites and preferential transport channels for guest Li^(+) ions,contributing to the increased specific capacity and rate performance.In contrast,inducing O anion vacancy in Sr_(x)VO_(3-δ) can improve rate performance while compromising the specific capacity.Our experimental results confirm the enhancement of specific capacities by fine adjusting the Sr and O vacancies,with a maximum capacity of 444 mAh g^(-1) achieved with Sr_(0.63)VO_(3-δ),which is a 37%increase versus stoichiometric SrVO_(3).Although rich defects have been induced,Sr_(x)VO_(3-δ) electrodes maintain a stable perovskite structure during cycling versus a LiFePO_(4) cathode,and the full-cell could achieve more than 6000 discharge/charge cycles with 80%capacity retention.This result highlights the possibility to use the cation defective-based engineering approach to design high-capacity perovskite oxide anode materials.
