Dissimilar metal joining between NiTi shape memory alloy（SMA） and stainless steel was conducted.A cluster of NiTi SMA wires were first joined with tungsten inert gas（TIG） welding process,then the NiTi SMA TIG weld...Dissimilar metal joining between NiTi shape memory alloy（SMA） and stainless steel was conducted.A cluster of NiTi SMA wires were first joined with tungsten inert gas（TIG） welding process,then the NiTi SMA TIG weld was welded to a stainless steel pipe with laser spot welding process.The microstructure of the welds was examined with an optical microscope and the elemental distribution in the welds was measured by electron probe microanalysis（EPMA）.The results show that TiC compounds dispersively distribute in the NiTi SMA TIG weld.However,the amount of TiC compounds greatly decreases around the fusion boundary of the laser spot weld between the NiTi SMA and stainless steel.Mutual diffusion between NiTi shape memory alloy and stainless steel happen within a short distance near the fusion boundary,and intermetallic compounds such as Ni3Ti＋（Fe,Ni）Ti appear around the fusion boundary.展开更多
On basis of the research result of stripe rust for 16 years since 1999,the epidemic characteristics and trend of stripe rust in the city were determined.Namely,the earlier the initial stage appeared,the heavier the di...On basis of the research result of stripe rust for 16 years since 1999,the epidemic characteristics and trend of stripe rust in the city were determined.Namely,the earlier the initial stage appeared,the heavier the disease would be.Furthermore,stripe rust has two introduction infection peaks,of which the first peak plays a key role.In farmlands,there are one to three epidemic peaks,and the infection area of the first peak plays the key role on the epidemic area of that year.In addition,the accumulated areas of late January was in significantly positive correlation with annually total area,with a correlation coefficient of 0.769 2.In recent 16 years,the frequency of severe stripe rust was as high as 81.25% which was 50% higher than that before 1995.The slight stripe rust became just in 2013,with a frequency of 6.3%,which indicated that the city has become a region hit by severe stripe rust.The internal reason is the reduction or loss of wheat variety＇s resistance to tripe rust for a new physiological race of rust is becoming pathogenic stronger and be the major race.Big fluctuation of temperatures in warm winter and spring,foggy and dew days slants much would be the external reason.展开更多
Electrochemical copolymerization of phenol and aniline was achieved on 304 stainless steel anodes in neutral water solution with an electrolyte of Na2SO4O4. Compared with pit corrosion potential of different copolymer...Electrochemical copolymerization of phenol and aniline was achieved on 304 stainless steel anodes in neutral water solution with an electrolyte of Na2SO4O4. Compared with pit corrosion potential of different copolymer coatings, the best solution composition was 0.09 mol/L phenol and 0.01 mol/L aniline. Through infrared spectrum analysis, polyaniline structure was proved in phenol-aniline copolymer, as well as more side chains. Scanning electron microscope was used to analyze microstructure of copolymer coating, taking advantage of part solubility of phenol-aniline eopolymer in tetrahydrofuran, the bifurcate network structure was observed. The copolymer coating microstructure was summarized, compared with the performance of polyphenol coatings, the reasons of corrosion resistance enhancement with the addition of aniline in electropolymerization reaction was assumed as well.展开更多
The effects of strain and chloride concentration on pitting susceptibility for type 304 stainless steel were studied in situ using the electrochemical technology under constant strain. The impact factor fc was brought...The effects of strain and chloride concentration on pitting susceptibility for type 304 stainless steel were studied in situ using the electrochemical technology under constant strain. The impact factor fc was brought forward to value the effect of strain on pitting. The pitting behaviors of type 304 stainless steel in various chloride concentrations under the strain levels 0%, 10%, and 30% were investigated. Potentiostatic polarization technology was used to study how the chloride concentration affected corrosion current density. The results indicated that fc increased substantially and pitting potential varied remarkably when chloride concentration was over 90 mg.L . Under the three levels of strain mentioned above, when chloride concentration was below 463 mg.L^-1,121 mg.L^-1, and 98 mg.L^-1 respectively, the pitting potential shifted towards positivity and, the passive film became more stable. When the strain was below 10%, the pitting susceptibility of type 304 stainless steel varied greatly as strain increased, whereas the susceptibility only changed a little when the strain was over 10%.展开更多
Objective To evaluate the use of titanium mesh reconstruction after sternal tumor resection. Methods From January 2007 to January 2011, 14 patients with sternal tumors were admitted into Peking Union Medical Hospital....Objective To evaluate the use of titanium mesh reconstruction after sternal tumor resection. Methods From January 2007 to January 2011, 14 patients with sternal tumors were admitted into Peking Union Medical Hospital. The clinical characteristics, surgical resection, and technique of reconstruction were reviewed. Results Of the 14 patients, 3 had a metastatic sternal tumor, the primary sites of which were as follows: hepatic carcinoma in one case (metastasis 19 years after operation), breast carcinoma in another case (metastasis 5 years after operation), and renal carcinoma in the other case (found simultaneously). Two patients showed local involvement of the sternum: 1 had thymic carcinoma, and the other had myofibrosarcoma. The remaining 9 patients had primary tumors: 4 were osteochondroma, 3 chondrosarcoma, 1 eosinophilic granuloma, 1 non-Hodgekin's lymphoma. En bloc resection of the sternal tumor was performed in all the 14 patients. The defect was repaired with the titanium mesh adjusted to the shape of the defect and fixed with the stainless steel wire. Eleven patients were followed up for a period from 2 months to 4 years, during which no translocation or broken of the titanium mesh was observed. Conclusions Radical en bloc excision remains the treatment of choice for sternal tumors. Sternum defect reconstruction using titanium mesh as a rigid replacement proves appropriate and effective.展开更多
基金Project(50974046/E041607) supported by the National Natural Science Foundation of China
文摘Dissimilar metal joining between NiTi shape memory alloy（SMA） and stainless steel was conducted.A cluster of NiTi SMA wires were first joined with tungsten inert gas（TIG） welding process,then the NiTi SMA TIG weld was welded to a stainless steel pipe with laser spot welding process.The microstructure of the welds was examined with an optical microscope and the elemental distribution in the welds was measured by electron probe microanalysis（EPMA）.The results show that TiC compounds dispersively distribute in the NiTi SMA TIG weld.However,the amount of TiC compounds greatly decreases around the fusion boundary of the laser spot weld between the NiTi SMA and stainless steel.Mutual diffusion between NiTi shape memory alloy and stainless steel happen within a short distance near the fusion boundary,and intermetallic compounds such as Ni3Ti＋（Fe,Ni）Ti appear around the fusion boundary.
文摘On basis of the research result of stripe rust for 16 years since 1999,the epidemic characteristics and trend of stripe rust in the city were determined.Namely,the earlier the initial stage appeared,the heavier the disease would be.Furthermore,stripe rust has two introduction infection peaks,of which the first peak plays a key role.In farmlands,there are one to three epidemic peaks,and the infection area of the first peak plays the key role on the epidemic area of that year.In addition,the accumulated areas of late January was in significantly positive correlation with annually total area,with a correlation coefficient of 0.769 2.In recent 16 years,the frequency of severe stripe rust was as high as 81.25% which was 50% higher than that before 1995.The slight stripe rust became just in 2013,with a frequency of 6.3%,which indicated that the city has become a region hit by severe stripe rust.The internal reason is the reduction or loss of wheat variety＇s resistance to tripe rust for a new physiological race of rust is becoming pathogenic stronger and be the major race.Big fluctuation of temperatures in warm winter and spring,foggy and dew days slants much would be the external reason.
文摘Electrochemical copolymerization of phenol and aniline was achieved on 304 stainless steel anodes in neutral water solution with an electrolyte of Na2SO4O4. Compared with pit corrosion potential of different copolymer coatings, the best solution composition was 0.09 mol/L phenol and 0.01 mol/L aniline. Through infrared spectrum analysis, polyaniline structure was proved in phenol-aniline copolymer, as well as more side chains. Scanning electron microscope was used to analyze microstructure of copolymer coating, taking advantage of part solubility of phenol-aniline eopolymer in tetrahydrofuran, the bifurcate network structure was observed. The copolymer coating microstructure was summarized, compared with the performance of polyphenol coatings, the reasons of corrosion resistance enhancement with the addition of aniline in electropolymerization reaction was assumed as well.
文摘The effects of strain and chloride concentration on pitting susceptibility for type 304 stainless steel were studied in situ using the electrochemical technology under constant strain. The impact factor fc was brought forward to value the effect of strain on pitting. The pitting behaviors of type 304 stainless steel in various chloride concentrations under the strain levels 0%, 10%, and 30% were investigated. Potentiostatic polarization technology was used to study how the chloride concentration affected corrosion current density. The results indicated that fc increased substantially and pitting potential varied remarkably when chloride concentration was over 90 mg.L . Under the three levels of strain mentioned above, when chloride concentration was below 463 mg.L^-1,121 mg.L^-1, and 98 mg.L^-1 respectively, the pitting potential shifted towards positivity and, the passive film became more stable. When the strain was below 10%, the pitting susceptibility of type 304 stainless steel varied greatly as strain increased, whereas the susceptibility only changed a little when the strain was over 10%.
文摘Objective To evaluate the use of titanium mesh reconstruction after sternal tumor resection. Methods From January 2007 to January 2011, 14 patients with sternal tumors were admitted into Peking Union Medical Hospital. The clinical characteristics, surgical resection, and technique of reconstruction were reviewed. Results Of the 14 patients, 3 had a metastatic sternal tumor, the primary sites of which were as follows: hepatic carcinoma in one case (metastasis 19 years after operation), breast carcinoma in another case (metastasis 5 years after operation), and renal carcinoma in the other case (found simultaneously). Two patients showed local involvement of the sternum: 1 had thymic carcinoma, and the other had myofibrosarcoma. The remaining 9 patients had primary tumors: 4 were osteochondroma, 3 chondrosarcoma, 1 eosinophilic granuloma, 1 non-Hodgekin's lymphoma. En bloc resection of the sternal tumor was performed in all the 14 patients. The defect was repaired with the titanium mesh adjusted to the shape of the defect and fixed with the stainless steel wire. Eleven patients were followed up for a period from 2 months to 4 years, during which no translocation or broken of the titanium mesh was observed. Conclusions Radical en bloc excision remains the treatment of choice for sternal tumors. Sternum defect reconstruction using titanium mesh as a rigid replacement proves appropriate and effective.
