The depression of pyrite in marmatite flotation by sodium glycerine-xanthate （SGX） was investigated through microflotation, zeta potential and adsorption measurements. The flotation tests of mineral show that in the...The depression of pyrite in marmatite flotation by sodium glycerine-xanthate （SGX） was investigated through microflotation, zeta potential and adsorption measurements. The flotation tests of mineral show that in the presence of SGX, marmatite can be activated by Cu^2＋ and shows good flotability, while pyrite cannot be activated and therefore shows poor flotability. At the pH value range from 4 to 11, the flotation selectivity between marmatite and pyrite is obvious when the SGX concentration is below 50 mg/L. The depression mechanism of SGX on sulfide minerals is discussed based on zeta potential and adsorption isotherm. Zeta potential measurement demonstrates that in the presence of Cu^2＋, SGX can strongly adsorb on the surface of pyrite, while it cannot adsorb on the surface of marmatite. The results of adsorption isotherms show that the adsorption density of SGX on pyrite is greater.展开更多
A novel mixed collector (BHOA) was prepared by mixing benzohydroxamic acid (BHA) and sodium oleate (NaOL) and applied to the flotation separation of smithsonite from dolomite. Flotation results showed that NaOL alone ...A novel mixed collector (BHOA) was prepared by mixing benzohydroxamic acid (BHA) and sodium oleate (NaOL) and applied to the flotation separation of smithsonite from dolomite. Flotation results showed that NaOL alone had good collecting performance on smithsonite and common gangue mineral dolomite but had poor selectivity. By using a BHA/NaOL mixed system with a molar ratio of 2:1, the recoveries of smithsonite and dolomite reached approximately 90% and 5%, respectively. Surface tension analysis showed that the surface activity of BHOA was a little higher than that of a single NaOL because of synergistic effects. Zeta potential and X-ray photoelectron spectroscopy measurements indicated that surfactants BHA and NaOL co-absorbed on the smithsonite surface and only NaOL was present on the dolomite surface in the presence of BHOA.展开更多
A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that...A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.展开更多
基金Project (50774094) supported by the National Natural Science Foundation of China
文摘The depression of pyrite in marmatite flotation by sodium glycerine-xanthate （SGX） was investigated through microflotation, zeta potential and adsorption measurements. The flotation tests of mineral show that in the presence of SGX, marmatite can be activated by Cu^2＋ and shows good flotability, while pyrite cannot be activated and therefore shows poor flotability. At the pH value range from 4 to 11, the flotation selectivity between marmatite and pyrite is obvious when the SGX concentration is below 50 mg/L. The depression mechanism of SGX on sulfide minerals is discussed based on zeta potential and adsorption isotherm. Zeta potential measurement demonstrates that in the presence of Cu^2＋, SGX can strongly adsorb on the surface of pyrite, while it cannot adsorb on the surface of marmatite. The results of adsorption isotherms show that the adsorption density of SGX on pyrite is greater.
基金Project(51704329) supported by the National Natural Science Foundation of ChinaProject(2018YFC1901901) supported by the National Key Scientific Research Project of China
文摘A novel mixed collector (BHOA) was prepared by mixing benzohydroxamic acid (BHA) and sodium oleate (NaOL) and applied to the flotation separation of smithsonite from dolomite. Flotation results showed that NaOL alone had good collecting performance on smithsonite and common gangue mineral dolomite but had poor selectivity. By using a BHA/NaOL mixed system with a molar ratio of 2:1, the recoveries of smithsonite and dolomite reached approximately 90% and 5%, respectively. Surface tension analysis showed that the surface activity of BHOA was a little higher than that of a single NaOL because of synergistic effects. Zeta potential and X-ray photoelectron spectroscopy measurements indicated that surfactants BHA and NaOL co-absorbed on the smithsonite surface and only NaOL was present on the dolomite surface in the presence of BHOA.
基金Project(2011SK3262) supported by Science and Technology Program of Hunan Province,China
文摘A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.
