浅析注塑模分模技巧及纠错方法

分析塑料模的分模技巧及纠错方法,给从事模具设计的技术人员提供一定的参考。

谈光缆割接中SDH维护的常见问题

本文针对SDH传输系统,在光缆割接过程中的一些常见问题进行分析和判断及解决方法。

Temperature dependence of microstructure and texture in cold drawn aluminum wire

The effect of strain and drawing temperature on the evolution of microstructure and fiber textures of aluminum wiresdrawn at room temperature and cryogenic temperature was investigated by TEM and EBSD observations.The results show that lowangle boundaries frequency increases and high angle boundaries frequency decreases with strain increasing when the strain is low.Athigh strain,most of grain and dislocation boundaries are parallel to the drawn direction and low angle boundaries frequencydecreases and high angle boundaries frequency increases with strain increasing.The decrease of deformation temperature leads tomicrostructure finer and low angle boundaries frequency increasing.Texture analysis indicates that volume fraction of complextexture component decreases with strain increasing and a mixture of?111?and?100?fiber texture forms at high strain.?111?is stableat low strains but?100?becomes stable at high strain.The decrease of temperature can enhance the stability of?111?orientation athigh strain.

Effect of Autophagy Over Liver Diseases

In recent years, increasingly evidences show that autophagy plays an important role in the pathogenesis and development of liver diseases, and the relationship between them has increasingly become a focus of concern. Autophagy refers to the process through which the impaired organelles, misfolded protein, and intruding microorganisms is degraded by lysosomes to maintain stability inside cells. This article states the effect of autophagy on liver diseases （hepatic fibrosis, fatty liver, viral hepatitis, and liver cancer）, which aims to provide a new direction for the treatment of liver diseases.

Single-phase earth fault current distribution between optical fiber composite overhead ground wire and ordinary ground wire in transmission system

It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of single-phase earth fault current distribution and case verification were accomplished by using the loop method.Influences of some factors,such as single-phase earth fault location and ground resistance of poles,on short-circuit current distribution were discussed.Results show that:1) results of the loop method conform to those of double sided elimination method;2) the fault location hardly influences macro-distribution of short-circuit current.However,current near fault location is evidently influenced;and 3) the short-circuit current distribution is not so sensitive to the ground resistance of poles.

A full-duplex optical access system with hybrid 64/16/4QAM-OFDM downlink

A full-duplex optical passive access scheme is proposed and verified by simulation, in which hybrid 64/16/4-quadrature amplitude modulation(64/16/4QAM) orthogonal frequency division multiplexing(OFDM) optical signal is for downstream transmission and non-return-to-zero(NRZ) optical signal is for upstream transmission. In view of the transmitting and receiving process for downlink optical signal, in-phase/quadrature-phase(I/Q) modulation based on Mach-Zehnder modulator(MZM) and homodyne coherent detection technology are employed, respectively. The simulation results show that the bit error ratio(BER) less than hardware decision forward error correction(HD-FEC) threshold is successfully obtained over transmission path with 20-km-long standard single mode fiber(SSMF) for hybrid downlink modulation OFDM optical signal. In addition, by dividing the system bandwidth into several subchannels consisting of some continuous subcarriers, it is convenient for users to select different channels depending on requirements of communication.