Based on uniaxial compression experimental results on fractured sandstone with grouting and anchorage, we studied the strength and deformation properties, the failure model, crack formation and evolution laws of fract...Based on uniaxial compression experimental results on fractured sandstone with grouting and anchorage, we studied the strength and deformation properties, the failure model, crack formation and evolution laws of fractured sandstone under different conditions of anchorage. The experimental results show that the strength and elastic modulus of fractured sandstone with different fracture angles are significantly lower than those of intact sandstone. Compared with the fractured samples without anchorage,the peak strength, residual strength, peak and ultimate axial strain of fractured sandstone under different anchorage increase by 64.5–320.0%, 62.8–493.0%, and 31.6–181.4%, respectively. The number of bolts and degree of pre-stress has certain effects on the peak strength and failure model of fractured sandstone. The peak strength of fractured sandstone under different anchorage increases to some extent, and the failure model of fractured sandstone also transforms from tensile failure to tensile–shear mixed failure with the number of bolts. The pre-stress can restrain the formation and evolution process of tensile cracks, delay the failure process of fractured sandstone under anchorage and impel the transformation of failure model from brittle failure to plastic failure.展开更多
The paper analyses quantitatively the anchoring effect of tensioned bolts on surrounding rock strength, and defines two concepts: one is the surrounding rock strength increased amount Δτ13 and the other is the stren...The paper analyses quantitatively the anchoring effect of tensioned bolts on surrounding rock strength, and defines two concepts: one is the surrounding rock strength increased amount Δτ13 and the other is the strength influence factor k. The anchoring effect of tensioned bolts is considered to increase a strength increased amount Δτ13 where Δτ13 is the product k and ten-sioned load p, i. e. Δτ13 = kp, where k is a function of two variables x and y. The distribu-tive properties both Δτ13 and k are also discussed in the paper, obtaining some useful results for designing bolting support parameters.展开更多
基金Financial support for this work, provided by the National Natural Science Foundation of China (Nos. 50774082, 50804046 and 51109209)
文摘Based on uniaxial compression experimental results on fractured sandstone with grouting and anchorage, we studied the strength and deformation properties, the failure model, crack formation and evolution laws of fractured sandstone under different conditions of anchorage. The experimental results show that the strength and elastic modulus of fractured sandstone with different fracture angles are significantly lower than those of intact sandstone. Compared with the fractured samples without anchorage,the peak strength, residual strength, peak and ultimate axial strain of fractured sandstone under different anchorage increase by 64.5–320.0%, 62.8–493.0%, and 31.6–181.4%, respectively. The number of bolts and degree of pre-stress has certain effects on the peak strength and failure model of fractured sandstone. The peak strength of fractured sandstone under different anchorage increases to some extent, and the failure model of fractured sandstone also transforms from tensile failure to tensile–shear mixed failure with the number of bolts. The pre-stress can restrain the formation and evolution process of tensile cracks, delay the failure process of fractured sandstone under anchorage and impel the transformation of failure model from brittle failure to plastic failure.
文摘The paper analyses quantitatively the anchoring effect of tensioned bolts on surrounding rock strength, and defines two concepts: one is the surrounding rock strength increased amount Δτ13 and the other is the strength influence factor k. The anchoring effect of tensioned bolts is considered to increase a strength increased amount Δτ13 where Δτ13 is the product k and ten-sioned load p, i. e. Δτ13 = kp, where k is a function of two variables x and y. The distribu-tive properties both Δτ13 and k are also discussed in the paper, obtaining some useful results for designing bolting support parameters.
