A356 aluminum alloys reinforced with carbon nano-tubes (CNTs) were produced by stir casting and compocasting routes and their microstructural characteristics and hardness were examined.In order to alleviate the proble...A356 aluminum alloys reinforced with carbon nano-tubes (CNTs) were produced by stir casting and compocasting routes and their microstructural characteristics and hardness were examined.In order to alleviate the problems associated with poor wettability, agglomeration and gravity segregation of CNTs in the melt, CNTs were introduced into the melts by injection of CNT deposited aluminum particles instead of raw CNTs.Aluminum particles with mean diameters of less than 100 μm were first deposited by CNTs using Ni-P electroless plating technique and then injected into the melt agitated by a mechanical stirrer.The slurry was subsequently cast at temperatures corresponding to full liquid as well as 0.15 and 0.30 solid fractions.The results show that addition of CNTs to A356 matrix can significantly refine both full liquid and semi-solid cast microstructures.Hardness of the samples is also significantly increased by addition of CNTs and A356-CNT composite cast at 0.3 solid fraction produces the highest hardness.展开更多
The concentration and chemical speciation of heavy metals including REEs （rare earth elements）, Th （thorium） and U （uranium） in domestic sludge and electroplating sludge were investigated, and those of the domes...The concentration and chemical speciation of heavy metals including REEs （rare earth elements）, Th （thorium） and U （uranium） in domestic sludge and electroplating sludge were investigated, and those of the domestic sludge were compared with those of natural soil. Removal of heavy metals in electroplating sludge was studied with bio-surfactants （saponin and sophorolipid） by batch and column experiments. The results suggested that heavy metals have greater concentrations and exist as more relatively unstable fraction in sludge than those in Natural soil. Nonionic saponin is more efficient than sophorolipid for the removal of heavy metals from the electroplating sludge, and mainly reacts with carbonate state （i.e., F3） and Fe-Mn oxide state （i.e., F5） fractions. The recovery efficiency of heavy metals in leachates from the electroplate sludge was attained 88%-97%. Saponin can be reused and be a promising and cost-effective material for the removal of heavy metals in sludge.展开更多
Due to outstanding ductility and high strength,the steel plate shear wall(SPSW)is recognized as a good lateral system for building structures; particularly as it interacts with earthquake resistant design.This study a...Due to outstanding ductility and high strength,the steel plate shear wall(SPSW)is recognized as a good lateral system for building structures; particularly as it interacts with earthquake resistant design.This study aims to reveal the dynamic and cyclic behavior of steel plated shear wall.Finite element method of analysis was implemented in order to simulate the behavior of such a wall structure.To determine the dynamic behavior of un-stiffened plate shear wall,two different analytical models were implemented.The post buckling strength of steel plate subjected to lateral loading was also employed.The story shear-drift diagrams of steel shear wall system were presented.The strength and ductility of the system obtained from the analysis were compared with those of steel shear wall tests reported before.The pertinent parameters of the steel shear wall system such as plate thickness,column and beam stiffness and the plate aspect ratio were recognized and their effects were recorded.The effect of stiffeners on the behavior of the SPSW was also investigated.展开更多
The hot-dip galvanizing line(HDGL) is a typical order-driven discrete-event process in steelmaking. It has some complicated dynamic characteristics such as a large time-varying delay, strong nonlinearity, and unmeasur...The hot-dip galvanizing line(HDGL) is a typical order-driven discrete-event process in steelmaking. It has some complicated dynamic characteristics such as a large time-varying delay, strong nonlinearity, and unmeasured disturbance, all of which lead to the difficulty of an online coating weight controller design. We propose a novel neural network based control system to solve these problems. The proposed method has been successfully applied to a real production line at Va Lin LY Steel Co., Loudi, China. The industrial application results show the effectiveness and efficiency of the proposed method, including significant reductions in the variance of the coating weight and the transition time.展开更多
文摘A356 aluminum alloys reinforced with carbon nano-tubes (CNTs) were produced by stir casting and compocasting routes and their microstructural characteristics and hardness were examined.In order to alleviate the problems associated with poor wettability, agglomeration and gravity segregation of CNTs in the melt, CNTs were introduced into the melts by injection of CNT deposited aluminum particles instead of raw CNTs.Aluminum particles with mean diameters of less than 100 μm were first deposited by CNTs using Ni-P electroless plating technique and then injected into the melt agitated by a mechanical stirrer.The slurry was subsequently cast at temperatures corresponding to full liquid as well as 0.15 and 0.30 solid fractions.The results show that addition of CNTs to A356 matrix can significantly refine both full liquid and semi-solid cast microstructures.Hardness of the samples is also significantly increased by addition of CNTs and A356-CNT composite cast at 0.3 solid fraction produces the highest hardness.
文摘The concentration and chemical speciation of heavy metals including REEs （rare earth elements）, Th （thorium） and U （uranium） in domestic sludge and electroplating sludge were investigated, and those of the domestic sludge were compared with those of natural soil. Removal of heavy metals in electroplating sludge was studied with bio-surfactants （saponin and sophorolipid） by batch and column experiments. The results suggested that heavy metals have greater concentrations and exist as more relatively unstable fraction in sludge than those in Natural soil. Nonionic saponin is more efficient than sophorolipid for the removal of heavy metals from the electroplating sludge, and mainly reacts with carbonate state （i.e., F3） and Fe-Mn oxide state （i.e., F5） fractions. The recovery efficiency of heavy metals in leachates from the electroplate sludge was attained 88%-97%. Saponin can be reused and be a promising and cost-effective material for the removal of heavy metals in sludge.
文摘Due to outstanding ductility and high strength,the steel plate shear wall(SPSW)is recognized as a good lateral system for building structures; particularly as it interacts with earthquake resistant design.This study aims to reveal the dynamic and cyclic behavior of steel plated shear wall.Finite element method of analysis was implemented in order to simulate the behavior of such a wall structure.To determine the dynamic behavior of un-stiffened plate shear wall,two different analytical models were implemented.The post buckling strength of steel plate subjected to lateral loading was also employed.The story shear-drift diagrams of steel shear wall system were presented.The strength and ductility of the system obtained from the analysis were compared with those of steel shear wall tests reported before.The pertinent parameters of the steel shear wall system such as plate thickness,column and beam stiffness and the plate aspect ratio were recognized and their effects were recorded.The effect of stiffeners on the behavior of the SPSW was also investigated.
文摘The hot-dip galvanizing line(HDGL) is a typical order-driven discrete-event process in steelmaking. It has some complicated dynamic characteristics such as a large time-varying delay, strong nonlinearity, and unmeasured disturbance, all of which lead to the difficulty of an online coating weight controller design. We propose a novel neural network based control system to solve these problems. The proposed method has been successfully applied to a real production line at Va Lin LY Steel Co., Loudi, China. The industrial application results show the effectiveness and efficiency of the proposed method, including significant reductions in the variance of the coating weight and the transition time.
