A Schiff base(a compound containing a C=N bond)induced anodic Ca−P coating was prepared on AZ31 Mg alloy in a mixed solution of CaCl_(2) and KH_(2)PO_(4) at 60℃ in the presence of glucose and L-cysteine.The microstru...A Schiff base(a compound containing a C=N bond)induced anodic Ca−P coating was prepared on AZ31 Mg alloy in a mixed solution of CaCl_(2) and KH_(2)PO_(4) at 60℃ in the presence of glucose and L-cysteine.The microstructure and chemical composition of the coatings were characterized using FE-SEM,FT-IR,XRD,and XPS.The in vitro degradation resistance of the coated samples was evaluated via potentiodynamic polarization(PDP),electrochemical impedance spectroscopy(EIS),and hydrogen evolution test.The experimental results show that the Ca−PSchiff base coating is composed of CaHPO_(4)(DCPA)and hydroxyapatite(HA),whereas HA is not present in the Ca−P coating.The Ca−P_(Schiff base) coating thickness is about 2 times that of Ca−P coating(Ca−P coating:(9.13±4.20)μm and Ca−P_(Schiff base):(18.13±5.78)μm).The corrosion current density of the Ca−P_(Schiff base) coating is two orders of magnitude lower than that of the Ca−P coating.The formation mechanism of the Ca−P_(Schiff base) is proposed.展开更多
基金supported by the National Natural Science Foundation of China(No.52071191)the Open Foundation of Hubei Key Laboratory of Advanced Technology for Automotive Components,China(No.XDQCKF2021006)。
文摘A Schiff base(a compound containing a C=N bond)induced anodic Ca−P coating was prepared on AZ31 Mg alloy in a mixed solution of CaCl_(2) and KH_(2)PO_(4) at 60℃ in the presence of glucose and L-cysteine.The microstructure and chemical composition of the coatings were characterized using FE-SEM,FT-IR,XRD,and XPS.The in vitro degradation resistance of the coated samples was evaluated via potentiodynamic polarization(PDP),electrochemical impedance spectroscopy(EIS),and hydrogen evolution test.The experimental results show that the Ca−PSchiff base coating is composed of CaHPO_(4)(DCPA)and hydroxyapatite(HA),whereas HA is not present in the Ca−P coating.The Ca−P_(Schiff base) coating thickness is about 2 times that of Ca−P coating(Ca−P coating:(9.13±4.20)μm and Ca−P_(Schiff base):(18.13±5.78)μm).The corrosion current density of the Ca−P_(Schiff base) coating is two orders of magnitude lower than that of the Ca−P coating.The formation mechanism of the Ca−P_(Schiff base) is proposed.
