Cu75Pt25 brazing filler was applied to brazing GH99 superalloy to Nb,and the sound joints were obtained by adjusting brazing parameters.The typical interfacial microstructure of the brazed joint was Nb/Nb7Ni6+NbNi3/Ni...Cu75Pt25 brazing filler was applied to brazing GH99 superalloy to Nb,and the sound joints were obtained by adjusting brazing parameters.The typical interfacial microstructure of the brazed joint was Nb/Nb7Ni6+NbNi3/Ni(s,s)+Cr-rich NbNi3+(NbCr2+NbNi3)/GH99.The effects of brazing temperature and holding time on the interfacial microstructure of GH99/Cu75Pt25/Nb joints were studied.The results showed that the solution and diffusion of Ni atoms from GH99 substrate into brazing seam played a critical role in the interfacial microstructure evolution.As the brazing temperature rose,the Nb−Ni reaction layer was formed instead of the initial Nb3Pt layer,and the thickness increased firstly and then remained constant.The highest shear strength of the joint reached 152 MPa when brazed at 1150℃ for 15 min.All of the joints presented a brittle fracture mode during shear test,and the fracture location changed from Nb3Pt layer to Nb−Ni compounds layer.展开更多
The influence of brazing temperature and brazing time on the microstructure and shear strength ofγ-TiAl/GH536 joints brazed with Ti-Zr-Cu-Ni-Fe-Co-Mo filler was investigated using SEM,EDS,XRD and universal testing ma...The influence of brazing temperature and brazing time on the microstructure and shear strength ofγ-TiAl/GH536 joints brazed with Ti-Zr-Cu-Ni-Fe-Co-Mo filler was investigated using SEM,EDS,XRD and universal testing machine.Results show that all the brazed joints mainly consist of four reaction layers regardless of the brazing temperature and brazing time.The thickness of the brazed seam and the average shear strength of the joint increase firstly and then decrease with brazing temperature in the range of 1090-1170℃and brazing time varying from 0 to 20 min.The maximum shear strength of 262 MPa is obtained at 1150℃for 10 min.The brittle Al3NiTi2 and TiNi3 intermetallics are the main controlling factors for the crack generation and deterioration of joint strength.The fracture surface is characterized as typical cleavage fracture and it mainly consists of massive brittle Al3NiTi2 intermetallics.展开更多
基金Projects(51905125,51775138,U1737205)supported by the National Natural Science Foundation of ChinaProject(ZR2019BEE031)supported by the Natural Science Foundation of Shandong Province,ChinaProjects(2017GGX40103,2019GHY112069)supported by the Key Research and Development Program of Shandong Province,China。
文摘Cu75Pt25 brazing filler was applied to brazing GH99 superalloy to Nb,and the sound joints were obtained by adjusting brazing parameters.The typical interfacial microstructure of the brazed joint was Nb/Nb7Ni6+NbNi3/Ni(s,s)+Cr-rich NbNi3+(NbCr2+NbNi3)/GH99.The effects of brazing temperature and holding time on the interfacial microstructure of GH99/Cu75Pt25/Nb joints were studied.The results showed that the solution and diffusion of Ni atoms from GH99 substrate into brazing seam played a critical role in the interfacial microstructure evolution.As the brazing temperature rose,the Nb−Ni reaction layer was formed instead of the initial Nb3Pt layer,and the thickness increased firstly and then remained constant.The highest shear strength of the joint reached 152 MPa when brazed at 1150℃ for 15 min.All of the joints presented a brittle fracture mode during shear test,and the fracture location changed from Nb3Pt layer to Nb−Ni compounds layer.
基金Project(51865012)supported by the National Natural Science Foundation of ChinaProject(20202BABL204040)supported by the Natural Science Foundation of Jiangxi Province,China+3 种基金Project(2016005)supported by the Open Foundation of National Engineering Research Center of Near-net-shape Forming for Metallic Materials,ChinaProject(GJJ170372)supported by the Science Foundation of Educational Department of Jiangxi Province,ChinaProject(JCKY2016603C003)supported by the GF Basic Research Project,ChinaProject(JPPT125GH038)supported by the Research Project of Special Furnishment and Part,China。
文摘The influence of brazing temperature and brazing time on the microstructure and shear strength ofγ-TiAl/GH536 joints brazed with Ti-Zr-Cu-Ni-Fe-Co-Mo filler was investigated using SEM,EDS,XRD and universal testing machine.Results show that all the brazed joints mainly consist of four reaction layers regardless of the brazing temperature and brazing time.The thickness of the brazed seam and the average shear strength of the joint increase firstly and then decrease with brazing temperature in the range of 1090-1170℃and brazing time varying from 0 to 20 min.The maximum shear strength of 262 MPa is obtained at 1150℃for 10 min.The brittle Al3NiTi2 and TiNi3 intermetallics are the main controlling factors for the crack generation and deterioration of joint strength.The fracture surface is characterized as typical cleavage fracture and it mainly consists of massive brittle Al3NiTi2 intermetallics.
