期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
预应力长孔道摩阻试验研究 被引量:4
1
作者 刘振之 《中外公路》 北大核心 2016年第3期207-211,共5页
基于长管道的管道环境复杂特点,进行了其长孔道摩阻试验研究,利用标准测力仪结合智能张拉设备,考察了长孔道摩阻试验中张拉力值传递规律,合理的长孔道张拉控制力、初应力和持荷时间的确定,同时运用最小二乘法进行μ、k的计算。研究结果... 基于长管道的管道环境复杂特点,进行了其长孔道摩阻试验研究,利用标准测力仪结合智能张拉设备,考察了长孔道摩阻试验中张拉力值传递规律,合理的长孔道张拉控制力、初应力和持荷时间的确定,同时运用最小二乘法进行μ、k的计算。研究结果表明:长孔道摩阻试验中张拉力传递到被动端的速度明显慢于短孔道,具有延时性,管道越长、弯曲累计弧度越大,延时越长;对于孔道长度大于90m管道应该增加控制应力的持荷时间来保证有效预应力在孔道内的传递时间,建议由原来的5min增加到8min左右。张拉控制应力、初应力大小应该根据长孔道的摩阻系数进行适当调整以满足复杂管道预应力损失要求。利用最小二乘法确定的μ、k与设计值较接近,表明了管道施工质量较好,达到了设计要求。 展开更多
关键词 现浇箱梁 长孔道 摩阻 张拉力 持荷时间
下载PDF
预应力长孔道循环智能压浆技术研究
2
作者 陈彦猛 《湖南交通科技》 2016年第2期196-199,共4页
预应力长孔道的压浆工艺和材料质量是关系到长孔道预应力长期耐久性的重要因素。考虑到传统压浆技术难以确保长孔道预应力复杂体系的压浆密实度,进行了智能压浆循环技术下的预应力长孔道压浆技术研究,研究了长孔道循环压浆下孔道内部浆... 预应力长孔道的压浆工艺和材料质量是关系到长孔道预应力长期耐久性的重要因素。考虑到传统压浆技术难以确保长孔道预应力复杂体系的压浆密实度,进行了智能压浆循环技术下的预应力长孔道压浆技术研究,研究了长孔道循环压浆下孔道内部浆液压力沿程损失大小及流动度损失变化,研究结果表明:长孔道压浆管道内壁压力的沿程损失大小受孔道长度、孔道弯曲度等因素的影响,大体呈现出正相关关系,建议对于长度大于90 m的预应力孔道应该考虑适当提高循环压浆压力和压力持续循环的时间。最后根据长孔道压浆压力沿程损失的特点制定了针对性的循环压浆工艺,即在长孔道两端分别采用一套压浆设备同时进行循环压浆。 展开更多
关键词 预应力长孔道 压力沿程损失 流动度 循环压浆
下载PDF
后张法预应力混凝土连续箱梁“接力”压浆施工工艺的应用及探讨
3
作者 吴晓东 《城市建筑》 2015年第29期79-79,81,共2页
本文结合后张法预应力混凝土连续箱梁张拉后“接力”压浆的施工,对后张法预应力混凝土连续梁的波纹管“接力”压浆施工工艺、施工方法的应用进行了归纳总结.
关键词 长孔道一次压浆 “接力” 压浆 施工工艺
下载PDF
Perpendicular intergrowth ZSM-5 plates with shortened 10-MR pores 被引量:2
4
作者 Ensheng Zhan Zhiping Xiong +4 位作者 Yan Zhou Mingrun Li Pengfei Wang Weibin Fan Wenjie Shen 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2020年第7期1132-1139,共8页
ZSM-5 plates with a perpendicular intergrowth structure was synthesized by using a simple amine as the structure directing agent under hydrothermal conditions,in which the mother plate and the perpendicularly standing... ZSM-5 plates with a perpendicular intergrowth structure was synthesized by using a simple amine as the structure directing agent under hydrothermal conditions,in which the mother plate and the perpendicularly standing plates oriented along the(010)and(100)planes of MFI crystals,respectively.During the crystallization process,the mother plate was initially formed on the surface of the amorphous solid gel,while a set of parallel plates perpendicularly grew on its surface,via a homogeneous nucleation mechanism.The mother plate and the perpendicular plates had a similar thickness of 100-200 nm and were characterized by considerably shortened straight and zigzag 10 member ring pores,respectively.This unique intergrowth structure greatly facilitated the diffusion of the reactive molecules in HZSM-5 crystals during methanol conversion to hydrocarbons. 展开更多
关键词 ZSM-5 Plate structure Perpendicular Intergrowth Channel length Hierarchical structure Molecule diffusion
下载PDF
爆破放顶技术在坚硬顶板综采面的应用 被引量:2
5
作者 窦伟 陈茂兴 《能源技术与管理》 2012年第1期89-90,96,共3页
顶板管理是煤矿安全生产的重要难题,坚硬顶板管理更是难上加难。俄霍布拉克煤矿开采的1#煤顶板就属于坚硬顶板,该矿通过1#煤1110回采面两道实施长孔结合架后浅孔爆破强制放顶技术,实现了工作面安全放顶,简化了回采工艺,提升了矿井本质... 顶板管理是煤矿安全生产的重要难题,坚硬顶板管理更是难上加难。俄霍布拉克煤矿开采的1#煤顶板就属于坚硬顶板,该矿通过1#煤1110回采面两道实施长孔结合架后浅孔爆破强制放顶技术,实现了工作面安全放顶,简化了回采工艺,提升了矿井本质安全水平。 展开更多
关键词 长孔 架后浅孔爆破 坚硬顶板 强制放顶
下载PDF
Two-sided Long Baseline Radargrammetry from Ascending Descending Orbits with Application to Mapping Post-seismic Topography in the West Sichuan Foreland Basin 被引量:3
6
作者 CHENG Hai-qin CHEN Qiang +2 位作者 LIU Guo-xiang YANG Ying-hui LIU Li-yao 《Journal of Mountain Science》 SCIE CSCD 2014年第5期1298-1307,共10页
One-sided ascending or descending Synthetic Aperture Radar(SAR) stereoradargrammetry has limited accuracy of topographic mapping due to the short spatial baseline(-100 km) and small intersection angle. In order to... One-sided ascending or descending Synthetic Aperture Radar(SAR) stereoradargrammetry has limited accuracy of topographic mapping due to the short spatial baseline(-100 km) and small intersection angle. In order to improve the performance and reliability of generating digital elevation model(DEM) from spaceborne SAR radargrammetry, an exploration of two-sided stereoradargrammetry from the combination of ascending and descending orbits with geometric configuration of long spatial baseline(-1000 km) was conducted in this study. The slant-range geometry between SAR sensors to the earth surface and the Doppler positioning equations were employed to establish the stereoscopic intersection model. The measurement uncertainty of two-sided radargrammetric elevation was estimated on the basis of radar parallax of homogeneous points between input SAR images. Two stereo-pairs of ALOS/PALSAR(Advanced Land Observing Satellite/Phased Array type L-band Synthetic Aperture Radar) acquisitions with the orbital separation almost 1080 km over the west Sichuan foreland basin with rolling topography in southwestern China were employed in the study to obtain the up-to-date terrain data after the 2008 Wenchuan earthquake that hit this area. Thequantitative accuracy assessment of two-sided radargrammetric DEM was performed with reference to field GPS observations. The experimental results show that the elevation accuracy reaches 5.5 m without ground control points(GCPs) used, and the accuracy is further improved to 1.5 m with only one GPS GCP used as the least constraint. The theoretical analysis and testing results demonstrate that the twosided long baseline SAR radargrammetry from the ascending and descending orbits can be a very promising technical alternative for large-area and high accuracy topographic mapping. 展开更多
关键词 Ascending and descending orbits Twosided SAR radargrammetry Long baseline Image parallax Accuracy assessment
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部