详细分析了某铝厂200 k A大型曲面阴极铝电解槽角部阳极长角的原因,从温度、电流分布多个角度出发,找出200 k A大型曲面阴极铝电解槽角部阳极长角的规律,并提出了严格监督检查制度,建立角部阳极数据库,强化电压和电流强度,调整工艺参数...详细分析了某铝厂200 k A大型曲面阴极铝电解槽角部阳极长角的原因,从温度、电流分布多个角度出发,找出200 k A大型曲面阴极铝电解槽角部阳极长角的规律,并提出了严格监督检查制度,建立角部阳极数据库,强化电压和电流强度,调整工艺参数等处理措施。展开更多
A self-ordered porous film was fabricated on aluminum alloy in a ternary boric-sulfuric-oxalic acid electrolyte system. By means of voltage–time response, the oxidation process as well as the growth efficiency was st...A self-ordered porous film was fabricated on aluminum alloy in a ternary boric-sulfuric-oxalic acid electrolyte system. By means of voltage–time response, the oxidation process as well as the growth efficiency was studied. Field emission scanning electron microscopy（FE-SEM） was adopted to reveal the morphological and microstructural features of as-fabricated oxide layers. The corrosion protection properties of the films were investigated by electrochemical impedance spectroscopy and potentiodynamic polarization measurements. The results showed that increasing the concentration of the double ionic layer located at the oxide interface could accelerate the film growth rate. The anodic oxidative layer with thickness of 8-9 μm and pore diameter of 10-14 nm maintains the pattern and topography of workpieces, compared with the overall closed film with hierarchical structure. Both samples exhibited much lower corrosion current density after boil water sealing. Meanwhile, a superior stability could be achieved through raising the ambient temperature.展开更多
The effects of Pb^2+concentration,current density,deposition time and temperature on Pb deposit structure were investigated.In lower Pb^2+concentration(~0.15 mol/L),carambola-like 3D-Pb structure was constructed,while...The effects of Pb^2+concentration,current density,deposition time and temperature on Pb deposit structure were investigated.In lower Pb^2+concentration(~0.15 mol/L),carambola-like 3D-Pb structure was constructed,while in higher Pb2+concentration(≥0.30 mol/L),Pb deposits exhibited pyramid-like structure.Furthermore,the oxide layer and anodic potential of carambola-shaped 3D-Pb(Cara-Pb)and pyramid-shaped 3D-Pb(Pyra-Pb)anodes were investigated and compared with those of fresh Pb anode.After 72 h galvanostatic electrolysis(50 mA/cm2)in 160 g/L H2SO4 solution,the oxide layer on Pyra-Pb was much thicker than that on Cara-Pb and Pb anodes,which remarkably relieved intercrystalline corrosion of the metallic substrate.Additionally,the oxide layer on Pyra-Pb anode presented a larger surface area and higher PbO2 content.Hence,Pyra-Pb anode showed a 40 m V lower anodic potential compared to Cara-Pb and Pb anodes.In sum,Pyra-Pb anode had a potential to decrease energy consumption and prolong the life span of traditional Pb anode.展开更多
文摘A self-ordered porous film was fabricated on aluminum alloy in a ternary boric-sulfuric-oxalic acid electrolyte system. By means of voltage–time response, the oxidation process as well as the growth efficiency was studied. Field emission scanning electron microscopy（FE-SEM） was adopted to reveal the morphological and microstructural features of as-fabricated oxide layers. The corrosion protection properties of the films were investigated by electrochemical impedance spectroscopy and potentiodynamic polarization measurements. The results showed that increasing the concentration of the double ionic layer located at the oxide interface could accelerate the film growth rate. The anodic oxidative layer with thickness of 8-9 μm and pore diameter of 10-14 nm maintains the pattern and topography of workpieces, compared with the overall closed film with hierarchical structure. Both samples exhibited much lower corrosion current density after boil water sealing. Meanwhile, a superior stability could be achieved through raising the ambient temperature.
基金Project(51704130)supported by the National Natural Science Foundation of ChinaProject(GK-201905)supported by the Research Fund of State Key Laboratory of Rare Metals Separation and Comprehensive Utilization,ChinaProject(jxxjbs16026)supported by the Doctoral Scientific Research Foundation of Jiangxi University of Science and Technology,China
文摘The effects of Pb^2+concentration,current density,deposition time and temperature on Pb deposit structure were investigated.In lower Pb^2+concentration(~0.15 mol/L),carambola-like 3D-Pb structure was constructed,while in higher Pb2+concentration(≥0.30 mol/L),Pb deposits exhibited pyramid-like structure.Furthermore,the oxide layer and anodic potential of carambola-shaped 3D-Pb(Cara-Pb)and pyramid-shaped 3D-Pb(Pyra-Pb)anodes were investigated and compared with those of fresh Pb anode.After 72 h galvanostatic electrolysis(50 mA/cm2)in 160 g/L H2SO4 solution,the oxide layer on Pyra-Pb was much thicker than that on Cara-Pb and Pb anodes,which remarkably relieved intercrystalline corrosion of the metallic substrate.Additionally,the oxide layer on Pyra-Pb anode presented a larger surface area and higher PbO2 content.Hence,Pyra-Pb anode showed a 40 m V lower anodic potential compared to Cara-Pb and Pb anodes.In sum,Pyra-Pb anode had a potential to decrease energy consumption and prolong the life span of traditional Pb anode.
