In this paper, motion analysis methods based on the moment features and flicker frequency features for early fire flame from ordinary CCD video camera were proposed, and in order to describe the changing of flame and ...In this paper, motion analysis methods based on the moment features and flicker frequency features for early fire flame from ordinary CCD video camera were proposed, and in order to describe the changing of flame and disturbance of non-flame phenomena further more, the average changing pixel number of the first-order moments of consecutive flames has been defined in the moment analysis as well. The first-order moments of all kinds of flames used in our experiments present irregularly flickering, and their average changing pixel numbers of first-order moments are greater than fire-like disturbances. For the analysis of flicker frequency of flame, which is extracted and calculated in spatial domain, and therefore it is computational simple and fast. The method of extracting flicker frequency from video images is not affected by the catalogues of combustion material and distance. In experiments, we adopted two kinds of flames, i. e. , fixed flame and movable flame. Many comparing and disturbing experiments were done and verified that the methods can be used as criteria for early fire detection.展开更多
In this paper, statistical optimization method was used to optimize the flash-spinning process conditions. Ultra-high molecular weight polyethylene （UHMWPE） superfine fiber was fabricated by flash-spinning method us...In this paper, statistical optimization method was used to optimize the flash-spinning process conditions. Ultra-high molecular weight polyethylene （UHMWPE） superfine fiber was fabricated by flash-spinning method using UHMWPE as the fiberforming polymer, 1, 2-dichloroethane as the main solvent. The important parameters of the flash-spinning were filtered by Plackett-Burman experimental design based on the single factor experiments. After determining the best regions of the fiber properties, the optimum level of the important parameters were determined by Box-Behnken design. The results of the design showed that the important parameters influencing on the properties of the flash.spinning fiber were spinning temperature, spinning pressure, and spinning solution concentration. The optimum technical parameters were： spinning temperature 186. 4 ~C, spinning pressure 6. 16 MPa, spinning solution concentration 3.06 %. The highest combination property of the flash-spinning fiber was 86.39 under this condition.展开更多
Intensity flicker is a common form of degradation in archived film. Most algorithms on this distortion are complicated and uncontrolled. This paper presented a discrete mathematical model of flicker, designed a block-...Intensity flicker is a common form of degradation in archived film. Most algorithms on this distortion are complicated and uncontrolled. This paper presented a discrete mathematical model of flicker, designed a block-based estimation method of the model＇s parameters according to their features of intensity variation in large area. With this estimation result it constructed a compensation model to repair the current frame. This restoration approach is full automatic and the repair process of current frame does not need the information of frames behind it. The algorithm was realized to establish a simple and adjustable repair system. The experimental results show that the proposed algorithm can remove most intensity flicker and preserve tho wanted effects.展开更多
The theory of motion is the important section of Mr. Arne Heim＇s theory of visual perception. In this paper, the author focus- es on his stroboscopic theory, and at the same time, according to the motion theory of Mr...The theory of motion is the important section of Mr. Arne Heim＇s theory of visual perception. In this paper, the author focus- es on his stroboscopic theory, and at the same time, according to the motion theory of Mr. Arne Heim, the ＂Sistine Madonna＂ is analyzed.展开更多
This paper proposes a one-branch zero-IF receiver topology, which samples the I and Q signals of the modulated RF carrier with one signal path by means of a multiphase local oscillator. The suggested one-branch re- ce...This paper proposes a one-branch zero-IF receiver topology, which samples the I and Q signals of the modulated RF carrier with one signal path by means of a multiphase local oscillator. The suggested one-branch re- ceiver works without matching problem, and it is also capable of cancelling out the flicker noise and DC-offset when the local oscillator is configured to the four-phase mode. The one-branch receiver saves much area and power com- pared with the traditional two-branch ones. All of the advantages above make the one-branch receiver topology a promising architectural candidate for low-power and low-cost RF CMOS receiver designs. Keywords： RF CMOS; zero-IF; flicker noise; image rejection; low-power; IQ matching展开更多
基金Supported by " Experimental Scale Studies in Smoke Control Strategy in Large Linear Atria in HKSAR" (B Q372)
文摘In this paper, motion analysis methods based on the moment features and flicker frequency features for early fire flame from ordinary CCD video camera were proposed, and in order to describe the changing of flame and disturbance of non-flame phenomena further more, the average changing pixel number of the first-order moments of consecutive flames has been defined in the moment analysis as well. The first-order moments of all kinds of flames used in our experiments present irregularly flickering, and their average changing pixel numbers of first-order moments are greater than fire-like disturbances. For the analysis of flicker frequency of flame, which is extracted and calculated in spatial domain, and therefore it is computational simple and fast. The method of extracting flicker frequency from video images is not affected by the catalogues of combustion material and distance. In experiments, we adopted two kinds of flames, i. e. , fixed flame and movable flame. Many comparing and disturbing experiments were done and verified that the methods can be used as criteria for early fire detection.
基金Key Project of Chinese Ministry of Education( No. 208005)Instructional Technology Project of National Textile andApparel Council, China ( No.2009076)Application Fundamental and Advanced Technology Research Proposal Project of Tianjin, China(No.10 JCYBJC03100)
文摘In this paper, statistical optimization method was used to optimize the flash-spinning process conditions. Ultra-high molecular weight polyethylene （UHMWPE） superfine fiber was fabricated by flash-spinning method using UHMWPE as the fiberforming polymer, 1, 2-dichloroethane as the main solvent. The important parameters of the flash-spinning were filtered by Plackett-Burman experimental design based on the single factor experiments. After determining the best regions of the fiber properties, the optimum level of the important parameters were determined by Box-Behnken design. The results of the design showed that the important parameters influencing on the properties of the flash.spinning fiber were spinning temperature, spinning pressure, and spinning solution concentration. The optimum technical parameters were： spinning temperature 186. 4 ~C, spinning pressure 6. 16 MPa, spinning solution concentration 3.06 %. The highest combination property of the flash-spinning fiber was 86.39 under this condition.
基金National Natural Science Foundation ofChina(No.69905003)
文摘Intensity flicker is a common form of degradation in archived film. Most algorithms on this distortion are complicated and uncontrolled. This paper presented a discrete mathematical model of flicker, designed a block-based estimation method of the model＇s parameters according to their features of intensity variation in large area. With this estimation result it constructed a compensation model to repair the current frame. This restoration approach is full automatic and the repair process of current frame does not need the information of frames behind it. The algorithm was realized to establish a simple and adjustable repair system. The experimental results show that the proposed algorithm can remove most intensity flicker and preserve tho wanted effects.
文摘The theory of motion is the important section of Mr. Arne Heim＇s theory of visual perception. In this paper, the author focus- es on his stroboscopic theory, and at the same time, according to the motion theory of Mr. Arne Heim, the ＂Sistine Madonna＂ is analyzed.
基金Supported by National Natural Science Foundation of China(No.60576026)
文摘This paper proposes a one-branch zero-IF receiver topology, which samples the I and Q signals of the modulated RF carrier with one signal path by means of a multiphase local oscillator. The suggested one-branch re- ceiver works without matching problem, and it is also capable of cancelling out the flicker noise and DC-offset when the local oscillator is configured to the four-phase mode. The one-branch receiver saves much area and power com- pared with the traditional two-branch ones. All of the advantages above make the one-branch receiver topology a promising architectural candidate for low-power and low-cost RF CMOS receiver designs. Keywords： RF CMOS; zero-IF; flicker noise; image rejection; low-power; IQ matching
