针对当前新的42V汽车供电系统发展的必然趋势,提出一种基于42V Power Net的车用双向AC-DC矩阵式变换器,代替了传统的PWM整流电路和DC-DC变换器。在新提出的结构中,不再需要大的直流母线电容。三相交流电通过矩阵式变换器的一级变换就可...针对当前新的42V汽车供电系统发展的必然趋势,提出一种基于42V Power Net的车用双向AC-DC矩阵式变换器,代替了传统的PWM整流电路和DC-DC变换器。在新提出的结构中,不再需要大的直流母线电容。三相交流电通过矩阵式变换器的一级变换就可以得到期望输出的42V直流电,能量传输密度比传统整流电路高。本文采用基于间接空间矢量调制的闭环控制策略,表明了其有效性,确保了输出电压的可调节性和在不同负载下高质量的输入电流。展开更多
The phase modulation characteristics of liquid crystal SLM （spatial light modulator） and the system for calibrating are proposed. Michelson interferometer is employed for measuring the modulation properties of devic...The phase modulation characteristics of liquid crystal SLM （spatial light modulator） and the system for calibrating are proposed. Michelson interferometer is employed for measuring the modulation properties of device. A system interface for operating SLM is designed with VC＋＋ compiler. The initial distortion phase is determined by measuring the reflective interference, and modulation of device is compensated by using our system. By using the LUT （lookup table） data provided by manufacture the wavelength disperse calibration is also achieved successfully.展开更多
Voltage source converter high-voltage direct current （VSC-HVDC） is a new power transmission technology pref- erable in small or medium power transmission. In this paper we discuss a new control system based on space...Voltage source converter high-voltage direct current （VSC-HVDC） is a new power transmission technology pref- erable in small or medium power transmission. In this paper we discuss a new control system based on space vector modulation （SVM） without any voltage line sensors. Using direct power control （DPC） SVM and a new double synchronous reference frame phase-locked loop （DSRF-PLL） approach, the control system is resistant to the majority of line voltage disturbances. Also, the system response has accelerated by using a feed forward power decoupled loop. The operation of this control strategy was verified in a SIMULINK/MATLAB simulation environment. To validate this control system, a 5 kV.A prototype system was constructed. Compared to the original controllers, the current total harmonic distortion （THD）, the active and reactive deviations and the DC voltage overshoot were lowered by 2.5%, 6.2% and 8%, respectively. The rectifier power factor in the worst condition was 0.93 and the DC voltage settling time was 0.2 s.展开更多
In situ strain photoluminescence （PL） and Raman spectroscopy have been employed to exploit the evolutions of the electronic band structure and lattice vibrational responses of chemical vapor deposition （CVD）-grown...In situ strain photoluminescence （PL） and Raman spectroscopy have been employed to exploit the evolutions of the electronic band structure and lattice vibrational responses of chemical vapor deposition （CVD）-grown monolayer tungsten disulphide （WS2） under uniaxial tensile strain. Observable broadening and appearance of an extra small feature at the longer-wavelength side shoulder of the PL peak occur under 2.5% strain, which could indicate the direct-indirect bandgap transition and is further confirmed by our density-functional-theory calculations. As the strain increases further, the spectral weight of the indirect transition gradually increases. Over the entire strain range, with the increase of the strain, the light emissions corresponding to each optical transition, such as the direct bandgap transition （K-K） and indirect bandgap transition （F-K, ≥2.5%）, exhibit a monotonous linear redshift. In addition, the binding energy of the indirect transition is found to be larger than that of the direct transition, and the slight lowering of the trion dissociation energy with increasing strain is observed. The strain was used to modulate not only the electronic band structure but also the lattice vibrations. The softening and splitting of the in-plane E＇ mode is observed under uniaxial tensile strain, and polarization-dependent Raman spectroscopy confirms the observed zigzag-oriented edge of WS2 grown by CVD in previous studies. These findings enrich our understanding of the strained states of monolayer transition-metal dichalcogenide （TMD） materials and lay a foundation for developing applications exploiting their strain-dependent optical properties, including the strain detection and light-emission modulation of such emerging two-dimensional TMDs.展开更多
文摘针对当前新的42V汽车供电系统发展的必然趋势,提出一种基于42V Power Net的车用双向AC-DC矩阵式变换器,代替了传统的PWM整流电路和DC-DC变换器。在新提出的结构中,不再需要大的直流母线电容。三相交流电通过矩阵式变换器的一级变换就可以得到期望输出的42V直流电,能量传输密度比传统整流电路高。本文采用基于间接空间矢量调制的闭环控制策略,表明了其有效性,确保了输出电压的可调节性和在不同负载下高质量的输入电流。
文摘The phase modulation characteristics of liquid crystal SLM （spatial light modulator） and the system for calibrating are proposed. Michelson interferometer is employed for measuring the modulation properties of device. A system interface for operating SLM is designed with VC＋＋ compiler. The initial distortion phase is determined by measuring the reflective interference, and modulation of device is compensated by using our system. By using the LUT （lookup table） data provided by manufacture the wavelength disperse calibration is also achieved successfully.
文摘Voltage source converter high-voltage direct current （VSC-HVDC） is a new power transmission technology pref- erable in small or medium power transmission. In this paper we discuss a new control system based on space vector modulation （SVM） without any voltage line sensors. Using direct power control （DPC） SVM and a new double synchronous reference frame phase-locked loop （DSRF-PLL） approach, the control system is resistant to the majority of line voltage disturbances. Also, the system response has accelerated by using a feed forward power decoupled loop. The operation of this control strategy was verified in a SIMULINK/MATLAB simulation environment. To validate this control system, a 5 kV.A prototype system was constructed. Compared to the original controllers, the current total harmonic distortion （THD）, the active and reactive deviations and the DC voltage overshoot were lowered by 2.5%, 6.2% and 8%, respectively. The rectifier power factor in the worst condition was 0.93 and the DC voltage settling time was 0.2 s.
基金This work is supported by the Singapore National Research Foundation NRF RF Award No. NRFRF2010- 07, MOE Tier 2 MOE2012-T2-2-049, A＇Star SERC PSF grant No. 1321202101, and MOE Tier 1 MOE2013- T1-2-235. W. Huang acknowledges the support of the National Basic Research Program of China （973 Program） （No. 2015CB932200）, the National Natural Science Foundation of China （NSFC） （Grant Nos. 21144004, 20974046, 21101095, 21003076, 20774043, 51173081, 50428303, 61136003, and 50428303）, the Ministry of Education of China （No. IRT1148）, the NSF of Jiangsu Province （Grant Nos. SBK201122680, 11KJB510017, BK2008053, 11KJB510017, BK2009025, 10KJB510013, and BZ2010043）, and NUPT （Nos. NY210030 and NY211022）. J. R Wang is grateful for the NSFC （No. 11474164）, NSF of Jiangsu province （No. BK20131413）, and the Jiangsu Specially-Appointed Professor program. Y. L. Wang thanks Luqing Wang, Dr. Xiaolong Zou, and Dr. Alex Kutana for the constructive discussion.
文摘In situ strain photoluminescence （PL） and Raman spectroscopy have been employed to exploit the evolutions of the electronic band structure and lattice vibrational responses of chemical vapor deposition （CVD）-grown monolayer tungsten disulphide （WS2） under uniaxial tensile strain. Observable broadening and appearance of an extra small feature at the longer-wavelength side shoulder of the PL peak occur under 2.5% strain, which could indicate the direct-indirect bandgap transition and is further confirmed by our density-functional-theory calculations. As the strain increases further, the spectral weight of the indirect transition gradually increases. Over the entire strain range, with the increase of the strain, the light emissions corresponding to each optical transition, such as the direct bandgap transition （K-K） and indirect bandgap transition （F-K, ≥2.5%）, exhibit a monotonous linear redshift. In addition, the binding energy of the indirect transition is found to be larger than that of the direct transition, and the slight lowering of the trion dissociation energy with increasing strain is observed. The strain was used to modulate not only the electronic band structure but also the lattice vibrations. The softening and splitting of the in-plane E＇ mode is observed under uniaxial tensile strain, and polarization-dependent Raman spectroscopy confirms the observed zigzag-oriented edge of WS2 grown by CVD in previous studies. These findings enrich our understanding of the strained states of monolayer transition-metal dichalcogenide （TMD） materials and lay a foundation for developing applications exploiting their strain-dependent optical properties, including the strain detection and light-emission modulation of such emerging two-dimensional TMDs.
