Objective To investigate whether glomerular density （GD） could be an independent prognostic factor for patients of IgA nephropathy with estimated glomerular filtration rate （eGFR） of 30 to 60 ml/min per 1.73 m2, ...Objective To investigate whether glomerular density （GD） could be an independent prognostic factor for patients of IgA nephropathy with estimated glomerular filtration rate （eGFR） of 30 to 60 ml/min per 1.73 m2, or for patients with time-average proteinuria 〈 0.5 g/d. Methods A total of 173 patients with biopsy-confirmed IgA nephropathy diagnosed from January 2000 to December 2010 were included. All of these patients were followed up for more than 5 years. The endpoint was a 〉 30% of decline in eGFR from baseline after 5-year follow-up. The optimal cut-off value of GD was calculated by ROC curve. Kaplan-Meier method and Cox regression analysis was used for survival analysis. Results A 30% of decline in eGFR occurred in 14.5% of all patients. The optimal diagnostic cut-off value of GD was 1.99/mm2 （AUC = 0.90, sensitivity = 84.0%, specificity = 81.8%） determined by ROC curve. The low GD group （GD 〈 1.99 per mm2） experienced a significant increase in renal endpoint for patients with eGFR of 30 to 60 ml/min per 1.73 m2 （six patients in lower GD group, while one patient in the other group）. For patients with time-average proteinuria 〈 0.5 g/d, the lower GD group showed a higher eGFR decline from baseline （4.5±16.7 ml/min per 1.73 m2 vs. –8.1±21.4 ml/min per 1.73 m2, P = 0.038）; two patients in this group reached the endpoint, while no patients in the higher GD group did. Conclusion GD could be an independent prognostic factor for patients of IgA nephropathy with eGFR at 30 to 60 ml/min per 1.73 m2 of body surface, particularly for those with time-averaged amount of urine protein less than 0.5 g per day.展开更多
The quench sensitivity of 6063 alloy was investigated via constructing time-temperature-property（TTP） curves by interrupted quenching technique and transmission electron microscopy（TEM） analysis.The results show t...The quench sensitivity of 6063 alloy was investigated via constructing time-temperature-property（TTP） curves by interrupted quenching technique and transmission electron microscopy（TEM） analysis.The results show that the quench sensitivity of 6063 alloy is lower than that of 6061 or 6082 alloy,and the critical temperature ranges from 300 to 410℃ with the nose temperature of about 360℃.From TEM analysis,heterogeneous precipitate β-Mg2Si is prior to nucleate on the（AlxFeySiz） dispersoids in the critical temperature range,and grows up most rapidly at the nose temperature of 360℃.The heterogeneous precipitation leads to a low concentration of solute,which consequently reduces the amount of the strengthening phase β＇＇ after aging.In the large-scale industrial production of 6063 alloy,the cooling rate during quenching should be enhanced as high as possible in the quenching sensitive temperature range（410-300℃） to suppress the heterogeneous precipitation to get optimal mechanical properties,and it should be slowed down properly from the solution temperature to 410℃ and below 300℃ to reduce the residual stress.展开更多
In this paper, two new kinds of B-basis functions called algebraic hyperbolic （AH） Bézier basis and AH B-Spline basis are presented in the space Гk=span{ l,t ……f^k-3,sinht,cosht}, in which K is an arbitrary ...In this paper, two new kinds of B-basis functions called algebraic hyperbolic （AH） Bézier basis and AH B-Spline basis are presented in the space Гk=span{ l,t ……f^k-3,sinht,cosht}, in which K is an arbitrary integer larger than or equal to 3. They share most optimal properties as those of the Bézier basis and B-Spline basis respectively and can represent exactly some remarkable curves and surfaces such as the hyperbola, catenary, hyperbolic spiral and the hyperbolic paraboloid. The generation of tensor product surfaces of the AH B-Spline basis have two forms： AH B-Spline surface and AH T-Spline surface.展开更多
基金Supported by the Key Projects in the National Science and Technology Pillar Program During the Twelfth Five-year Plan Period(2011BAI10B03)
文摘Objective To investigate whether glomerular density （GD） could be an independent prognostic factor for patients of IgA nephropathy with estimated glomerular filtration rate （eGFR） of 30 to 60 ml/min per 1.73 m2, or for patients with time-average proteinuria 〈 0.5 g/d. Methods A total of 173 patients with biopsy-confirmed IgA nephropathy diagnosed from January 2000 to December 2010 were included. All of these patients were followed up for more than 5 years. The endpoint was a 〉 30% of decline in eGFR from baseline after 5-year follow-up. The optimal cut-off value of GD was calculated by ROC curve. Kaplan-Meier method and Cox regression analysis was used for survival analysis. Results A 30% of decline in eGFR occurred in 14.5% of all patients. The optimal diagnostic cut-off value of GD was 1.99/mm2 （AUC = 0.90, sensitivity = 84.0%, specificity = 81.8%） determined by ROC curve. The low GD group （GD 〈 1.99 per mm2） experienced a significant increase in renal endpoint for patients with eGFR of 30 to 60 ml/min per 1.73 m2 （six patients in lower GD group, while one patient in the other group）. For patients with time-average proteinuria 〈 0.5 g/d, the lower GD group showed a higher eGFR decline from baseline （4.5±16.7 ml/min per 1.73 m2 vs. –8.1±21.4 ml/min per 1.73 m2, P = 0.038）; two patients in this group reached the endpoint, while no patients in the higher GD group did. Conclusion GD could be an independent prognostic factor for patients of IgA nephropathy with eGFR at 30 to 60 ml/min per 1.73 m2 of body surface, particularly for those with time-averaged amount of urine protein less than 0.5 g per day.
文摘The quench sensitivity of 6063 alloy was investigated via constructing time-temperature-property（TTP） curves by interrupted quenching technique and transmission electron microscopy（TEM） analysis.The results show that the quench sensitivity of 6063 alloy is lower than that of 6061 or 6082 alloy,and the critical temperature ranges from 300 to 410℃ with the nose temperature of about 360℃.From TEM analysis,heterogeneous precipitate β-Mg2Si is prior to nucleate on the（AlxFeySiz） dispersoids in the critical temperature range,and grows up most rapidly at the nose temperature of 360℃.The heterogeneous precipitation leads to a low concentration of solute,which consequently reduces the amount of the strengthening phase β＇＇ after aging.In the large-scale industrial production of 6063 alloy,the cooling rate during quenching should be enhanced as high as possible in the quenching sensitive temperature range（410-300℃） to suppress the heterogeneous precipitation to get optimal mechanical properties,and it should be slowed down properly from the solution temperature to 410℃ and below 300℃ to reduce the residual stress.
基金Projects supported by the National Natural Science Foundation of China (No. 10371110) and the National Basic Research Program (973) of China (No.G2002CB312101)
文摘In this paper, two new kinds of B-basis functions called algebraic hyperbolic （AH） Bézier basis and AH B-Spline basis are presented in the space Гk=span{ l,t ……f^k-3,sinht,cosht}, in which K is an arbitrary integer larger than or equal to 3. They share most optimal properties as those of the Bézier basis and B-Spline basis respectively and can represent exactly some remarkable curves and surfaces such as the hyperbola, catenary, hyperbolic spiral and the hyperbolic paraboloid. The generation of tensor product surfaces of the AH B-Spline basis have two forms： AH B-Spline surface and AH T-Spline surface.
