热防护织物的产品开发

通过对苎麻织物进行陶瓷粉末的涂层整理，测试其当量防热时间。

阻燃织物的组织、密度对其功能性的影响

以双层阻燃织物为试样 ,通过实验测试 ,研究分析了织物组织、密度对其阻燃性能、防热性能的影响 .研究认为 ,织物组织对其阻燃性、防热性影响不大 ,而织物密度对其阻燃性和防热性有显著影响 .

Research on non-steam-cured and non-fired fly-ash thermal insulating materials

A thermal insulating material is synthesized via a non-steam-cured and non-fired route by using fly-ash, sorel cement and hydrogen peroxide solution as raw material. Properties such as apparent density, compressive strength, bending strength, thermal conductivity, water resistance, and thermal tolerance of this matrial are studied, some influencing factors on its performance discussed. This material has an apparent density of 360 kg/m^3, a compressive strength of 1.86 MPa, a thermal conduction coefficient of 0.072 W/（m·K）, a softening coefficient of 0.55, and a thermal tolerant temperature of 300 ℃. Test results show that this material is light in weight, of high strength, and good thermal insulation. In addition, neither steam-curing nor sintering is needed in producing it. Further more, large amount of fly ash is used in this material, making it a low cost and environment-friendly building material.

Overview of flowline bundle technology from concept selection to offshore installation

Flowline bundle system consisting of carrier pipe,sleeve pipe and internal flowlines offers innovative solution for the infield transportation of oil and gas. Due to its features,flowline bundle offers a couple of advantages over conventional flowline in particular for cases where multi-flowlines and high thermal performance is of great interest. The main benefits and advantages of such system include excellent thermal performance to prevent wax formation and hydrates,multiple bundled flowlines,mechanical and corrosion protection,potential reuse, etc. With the developments of offshore oil and gas industries,more and more hydrocarbon resources are being explored and discovered from shallow to deep water. Pipeline bundle system can be a smart solution for certain applications,which can be safe and cost effective solution. The objective of this paper is to overview pipeline bundle technology,outline detailed engineering design issue and procedure. Focus is given to its potential application in offshore for infield transportation. Engineering design principles and procedures for pipeline bundle system are highlighted. Construction methods of flowline bundle onshore are reviewed. Offshore towing and installation of pipeline bundle procedure is outlined.

Study on Heat Dissipater for High-Power Thyristors in Explosion-Proof Shell

A new type water-cooled heat dissipater for multiple high-power thyristors in explosion-proof shell used in coal mine was designed, and then, the numerical computation of the three-dimensional steady-state temperature distributions under different working conditions for cooling core was conducted in order to understand in detail the heat transfer performance. Based on the computation results, the temperature differences and the maximum heat transfer rates were given. These results of the study on the heat dissipater lay a basis for optimising its structure design and guiding its operation.

Heat resistance and water protection effectiveness for large single-pane fireproof glass

The effects and heat transfer mode of water film and sprinkler system on the heat-resistant property associated with the insulation of a fireproof glass were investigated. In the experiments, fireproof glass with a size of 3 300 mm （height）×2 200 mm （width） ×12 mm （thickness） was exposed to an oil pool fire with a power of approximately 1.4 MW. The experimental results show that the application of the water film or sprinkler system on the glass can effectively resist the intensive heat from the fire in the test due to the absorption of latent heat. The permitted period of integrity and insulation with a water film and a sprinkler system could be extended to 60 min. It should be noted that the temperature of the glass surface Can be kept under 60℃in a 60 min test. The experimental results suggest that it is feasible to substitute fireproof glass with water film for a fireproof door as long as the water film or sprinkler system can work stably and water can cover the whole surface of the frreproof glass.

Biocompatibility and bone regeneration of PEO/Mg-Al LDH-coated pure Mg:an in vitro and in vivo study

Forming a stable anti-corrosion surface layer on magnesium(Mg)and its alloys has become a major challenge in developing a desirable degradable medical implant in bone.In this study,a porous MgO layer was first formed on Mg by plasma electrolytic oxidation(PEO),and then a Mg-Al layered double hydroxide(LDH)layer was prepared to seal the porous structure of the PEO layer(LDH-2h and LDH-12h)via hydrothermal treatment.The bilayer structure composite coating,which can effectively resist the penetration of surrounding media,is similar to plain Chinese tiles.The in vitro results revealed that compared with other coatings,the LDH-12h composite coating can reduce the release of Mg ions and induce a milder change in pH when immersed in phosphate-buffered saline(PBS).In vitro rat bone marrow stem cell(rBMSC)culture suggested that the LDH-12h composite coating is favorable for cell activity,proliferation and could improve the osteogenic activity of rBMSCs.A subcutaneous implantation test revealed that the as-prepared sample showed enhanced corrosion resistance and histocompatibility in vivo,especially in the LDH-12h group.Moreover,LDH-12h had the lowest rate of degradation and the closest combination with the new bone after being inserted into a rat femur for 12 weeks with no major organ dysfunction.In summary,the asprepared PEO/Mg-Al LDH composite coating is able to improve the corrosion resistance and biocompatibility of Mg and to enhance osteogenic activity in vivo,suggesting its promising prospects for orthopedic applications.