Despite being a promising photoanode material for water splitting,WO_(3) has low conductivity,high onset potential,and sluggish water oxidation kinetics.In this study,we designed Ti-doped WO_(3) nanoplate arrays on fl...Despite being a promising photoanode material for water splitting,WO_(3) has low conductivity,high onset potential,and sluggish water oxidation kinetics.In this study,we designed Ti-doped WO_(3) nanoplate arrays on fluoride-doped tin oxide by a seed-free hydrothermal method,and the effects of doping on the photoelectrochemical performance were investigated.The optimal Ti-doped WO_(3) electrode achieved a photocurrent density of 0.53 mA/cm^(2) at 0.6 V(vs Ag/AgCl),110%higher than that of pure WO_(3) nanoplate arrays.Moreover,a significant cathodic shift in the onset potential was observed after doping.X-ray photoelectron spectroscopy valence band and ultraviolet–visible spectra revealed that the band positions of Ti-doped WO_(3) photoanodes moved upward,yielding a lower onset potential.Furthermore,electrochemical impedance spectroscopy measurements revealed that the conductivities of the WO_(3) photoanodes improved after doping,because of the rapid separation of photo-generated charge carriers.Thus,we report a new design route toward efficient and low-cost photoanodes for photoelectrochemical applications.展开更多
The environmental potential of perforated surfaces in the tropics is noticeable. They allow obtaining higher attenuation and spatial dispersion of both direct and diffuse lighting in indoor spaces, whereas in outdoor ...The environmental potential of perforated surfaces in the tropics is noticeable. They allow obtaining higher attenuation and spatial dispersion of both direct and diffuse lighting in indoor spaces, whereas in outdoor areas, the openwork elements reduce surfaces temperature and mitigate the characteristic glare of smooth surfaces when exposed to sunlight. Openwork walls have an immense sustainability potential in modern tropical buildings： they limit the solar rays＇ admission, as well as provide an advantageous use of natural light and cross ventilation, but the research on their solar behavior is scarce. In order to obtain suitable levels of solar gain, relationships among shape, proportion, thickness and partitions composing openwork elements must be studied. This research evaluates solar gain in perforated surfaces by defining the ＂solar applicability range＂, a property useful to identify intervals of guidance where a perforated pattern shape will present a definite solar gain, giving valuable input in the geometric design of openwork elements and introducing shade performance in the design of openwork walls. Results give geometric guidelines that allow to widen the solar applicability range of a perforation pattern and to define two perforation features that have impact on the solar performance of perforated surfaces： focalization and solar performance shift.展开更多
n-Si,believed as a promising photoanode candidate,has suffered from sluggish oxygen evolution reaction(OER)kinetics and poor chemical stability when exposed to aqueous electrolyte.Herein,CoO_(x)/Ni:CoOOH bilayers were...n-Si,believed as a promising photoanode candidate,has suffered from sluggish oxygen evolution reaction(OER)kinetics and poor chemical stability when exposed to aqueous electrolyte.Herein,CoO_(x)/Ni:CoOOH bilayers were successfully deposited on n-Si substrate by atomic layer-deposition(ALD)and photoassisted electrochemical deposition(PED)for stabilizing and catalyzing photoelectrochemical(PEC)water oxidation.In comparison to the n-Si/CoO_(x)photoanode as reference,the prepared n-Si/CoO_(x)/Ni:CoOOH photoanode upon the optimized PED process presents a much improved PEC performance for water splitting,with the onset potential cathodically shifted to~1.03 V vs.reversible hydrogen electrode(RHE)and the photocurrent density much increased to 20 mA cm^(−2)at 1.23 V vs.RHE.It is revealed that the introduction of Ni dopants increases the work functions of the deposited Ni:CoOOH overlayers,which gives rise to the upward band bending weakened at the n-Si/CoO_(x)/Ni:CoOOH cascading interface while strengthened at the Ni:CoOOH/electrolyte interface(with the band bending shifted from downward to upward),contributing to the decreased and the increased driving forces for charge transfer at the interfaces,respectively.Then,the balanced driving forces at the interfaces would endow the n-Si/CoO_(x)/Ni:CoOOH photoanode with the best PEC performance.Moreover,PED has been evidenced superior to ED to dope Ni into CoOOH with the formed overlayer effectively catalyzing and stabilizing PEC water splitting.展开更多
基金Project(Qian Jiao He KY Zi [2021]257) supported provided by the Natural Science Research Project of Education Department of Guizhou Province,ChinaProject(GZSQCC2019003) supported by the High-level Innovative Talent Cultivation Project of Guizhou Province,ChinaProjects(GZLGXM-01,GZLGXM-08) supported by the Academic New Seedling Cultivation and Innovation Exploration Project of Guizhou Institute of Technology,China。
文摘Despite being a promising photoanode material for water splitting,WO_(3) has low conductivity,high onset potential,and sluggish water oxidation kinetics.In this study,we designed Ti-doped WO_(3) nanoplate arrays on fluoride-doped tin oxide by a seed-free hydrothermal method,and the effects of doping on the photoelectrochemical performance were investigated.The optimal Ti-doped WO_(3) electrode achieved a photocurrent density of 0.53 mA/cm^(2) at 0.6 V(vs Ag/AgCl),110%higher than that of pure WO_(3) nanoplate arrays.Moreover,a significant cathodic shift in the onset potential was observed after doping.X-ray photoelectron spectroscopy valence band and ultraviolet–visible spectra revealed that the band positions of Ti-doped WO_(3) photoanodes moved upward,yielding a lower onset potential.Furthermore,electrochemical impedance spectroscopy measurements revealed that the conductivities of the WO_(3) photoanodes improved after doping,because of the rapid separation of photo-generated charge carriers.Thus,we report a new design route toward efficient and low-cost photoanodes for photoelectrochemical applications.
文摘The environmental potential of perforated surfaces in the tropics is noticeable. They allow obtaining higher attenuation and spatial dispersion of both direct and diffuse lighting in indoor spaces, whereas in outdoor areas, the openwork elements reduce surfaces temperature and mitigate the characteristic glare of smooth surfaces when exposed to sunlight. Openwork walls have an immense sustainability potential in modern tropical buildings： they limit the solar rays＇ admission, as well as provide an advantageous use of natural light and cross ventilation, but the research on their solar behavior is scarce. In order to obtain suitable levels of solar gain, relationships among shape, proportion, thickness and partitions composing openwork elements must be studied. This research evaluates solar gain in perforated surfaces by defining the ＂solar applicability range＂, a property useful to identify intervals of guidance where a perforated pattern shape will present a definite solar gain, giving valuable input in the geometric design of openwork elements and introducing shade performance in the design of openwork walls. Results give geometric guidelines that allow to widen the solar applicability range of a perforation pattern and to define two perforation features that have impact on the solar performance of perforated surfaces： focalization and solar performance shift.
基金supported by the National Key Research and Development Program of China (2018YFB1502003)the National Natural Science Foundation of China (21875183)+3 种基金the Natural Science Basic Research Program of Shaanxi Province (2019JCW-10)the National Program for the Support of Top-notch Young Professionalsthe Fundamental Research Funds for the Central UniversitiesThe Youth Innovation Team of Shaanxi Universities
文摘n-Si,believed as a promising photoanode candidate,has suffered from sluggish oxygen evolution reaction(OER)kinetics and poor chemical stability when exposed to aqueous electrolyte.Herein,CoO_(x)/Ni:CoOOH bilayers were successfully deposited on n-Si substrate by atomic layer-deposition(ALD)and photoassisted electrochemical deposition(PED)for stabilizing and catalyzing photoelectrochemical(PEC)water oxidation.In comparison to the n-Si/CoO_(x)photoanode as reference,the prepared n-Si/CoO_(x)/Ni:CoOOH photoanode upon the optimized PED process presents a much improved PEC performance for water splitting,with the onset potential cathodically shifted to~1.03 V vs.reversible hydrogen electrode(RHE)and the photocurrent density much increased to 20 mA cm^(−2)at 1.23 V vs.RHE.It is revealed that the introduction of Ni dopants increases the work functions of the deposited Ni:CoOOH overlayers,which gives rise to the upward band bending weakened at the n-Si/CoO_(x)/Ni:CoOOH cascading interface while strengthened at the Ni:CoOOH/electrolyte interface(with the band bending shifted from downward to upward),contributing to the decreased and the increased driving forces for charge transfer at the interfaces,respectively.Then,the balanced driving forces at the interfaces would endow the n-Si/CoO_(x)/Ni:CoOOH photoanode with the best PEC performance.Moreover,PED has been evidenced superior to ED to dope Ni into CoOOH with the formed overlayer effectively catalyzing and stabilizing PEC water splitting.
