The anodic layer and oxygen evolution behavior of Pb-Ag-Nd alloy during pulse current polarization and constant current polarization in 160 g/L H2SO4 solution was comparatively investigated by chronopotentiometry, SEM...The anodic layer and oxygen evolution behavior of Pb-Ag-Nd alloy during pulse current polarization and constant current polarization in 160 g/L H2SO4 solution was comparatively investigated by chronopotentiometry, SEM, XRD, EIS and Tafel techniques. The results show that the anodic layer on Pb-Ag-Nd alloy formed through pulse current polarization is more intact and presents fewer micro-holes than that formed through constant current polarization. This could be attributed to the low current density period, which works as a ‘recovery period＇. During this period, the oxygen evolution reaction is less intense, which benefits the recovery of porous anodic layer. Pb-Ag-Nd anode also shows a lower anodic potential during pulse current polarization, which is in accordance with its smaller charge transfer resistance and smaller Tafel slope coefficient at high over-potential region. The lower anodic potential could be ascribed to the higher concentration of Pb O2 in the anodic layer, which promotes the formation of more reactive sites for the oxygen evolution reaction.展开更多
Boron-doped diamond （BDD） film electrodes using Ta as substrates were employed for anodic oxidation of salicylic acid （SA）. The effects of operational variables including initial concentration, current density, te...Boron-doped diamond （BDD） film electrodes using Ta as substrates were employed for anodic oxidation of salicylic acid （SA）. The effects of operational variables including initial concentration, current density, temperature and pH were examined. The results showed that BDD films deposited on the Ta substrates had high electrocatalytic activity for SA degradation. There was little effect ofpH on SA degradation. The current efficiency （CE） ,aas fbund to be dependent mainly on the initial SA concentration, current density and temperature. Chemical oxygen demand （COD） was reduced from 830 mg/L to 42 mg/L under a current density of200A/m^2 at 30℃.展开更多
基金Projects(51204208,51374240)supported by the National Natural Science Foundation of ChinaProject(2012BAA03B04)supported by the National Science and Technology Pillar Program of ChinaProject(2014zzts028)supported by the Fundamental Research Funds for the Central Universities of Central South University,China
文摘The anodic layer and oxygen evolution behavior of Pb-Ag-Nd alloy during pulse current polarization and constant current polarization in 160 g/L H2SO4 solution was comparatively investigated by chronopotentiometry, SEM, XRD, EIS and Tafel techniques. The results show that the anodic layer on Pb-Ag-Nd alloy formed through pulse current polarization is more intact and presents fewer micro-holes than that formed through constant current polarization. This could be attributed to the low current density period, which works as a ‘recovery period＇. During this period, the oxygen evolution reaction is less intense, which benefits the recovery of porous anodic layer. Pb-Ag-Nd anode also shows a lower anodic potential during pulse current polarization, which is in accordance with its smaller charge transfer resistance and smaller Tafel slope coefficient at high over-potential region. The lower anodic potential could be ascribed to the higher concentration of Pb O2 in the anodic layer, which promotes the formation of more reactive sites for the oxygen evolution reaction.
文摘Boron-doped diamond （BDD） film electrodes using Ta as substrates were employed for anodic oxidation of salicylic acid （SA）. The effects of operational variables including initial concentration, current density, temperature and pH were examined. The results showed that BDD films deposited on the Ta substrates had high electrocatalytic activity for SA degradation. There was little effect ofpH on SA degradation. The current efficiency （CE） ,aas fbund to be dependent mainly on the initial SA concentration, current density and temperature. Chemical oxygen demand （COD） was reduced from 830 mg/L to 42 mg/L under a current density of200A/m^2 at 30℃.
