期刊文献+
共找到11篇文章
< 1 >
每页显示 20 50 100
基于GSE平台的阻塞计算法动态控制仿真
1
作者 马爽 万继华 《仪器仪表用户》 2023年第7期67-71,61,共6页
为了验证阻塞计逻辑算法,本文利用JTopmeret建立了阻塞计的仿真模型,根据阻塞计运行工况及控制要求,利用JControl建立控制算法仿真模型。通过仿真运行结果表明,仿真结果与现场运行数据相近似。本文中的阻塞计控制算法对工程设计具有参... 为了验证阻塞计逻辑算法,本文利用JTopmeret建立了阻塞计的仿真模型,根据阻塞计运行工况及控制要求,利用JControl建立控制算法仿真模型。通过仿真运行结果表明,仿真结果与现场运行数据相近似。本文中的阻塞计控制算法对工程设计具有参考价值。 展开更多
关键词 阻塞计 控制算法 仿真模型
下载PDF
测定钠中杂质的自动阻塞计的研制 被引量:2
2
作者 洪顺章 张忠 +5 位作者 张建民 桑维良 钱承跃 周学智 李崇祥 徐伟南 《原子能科学技术》 EI CAS CSCD 北大核心 1994年第1期62-67,共6页
采用风机冷却速率自动调节系统,解决低阻塞温度的测量问题,给出不同阻塞温度下自动阻塞计的温度和流量测量曲线。温度和流量的数据采集采用IMP分散式数据检测与控制系统以消除干扰,提高测量精度。阻塞计的工作过程基本上由微机控... 采用风机冷却速率自动调节系统,解决低阻塞温度的测量问题,给出不同阻塞温度下自动阻塞计的温度和流量测量曲线。温度和流量的数据采集采用IMP分散式数据检测与控制系统以消除干扰,提高测量精度。阻塞计的工作过程基本上由微机控制自动进行。 展开更多
关键词 阻塞计 阻塞温度 杂质
下载PDF
测定钠中杂质的手动阻塞计的研究 被引量:6
3
作者 洪顺章 孙世平 《原子能科学技术》 EI CAS CSCD 北大核心 1989年第2期32-38,共7页
文章介绍了测定钠中杂质浓度的手动阻塞计的原理、装置和实验结果。为了减少测量误差,我们研究了影响准确测定阻塞温度的因素,并且找到了减少测量误差的办法。在同样的杂质饱和温度下,该阻塞计测得的高、低阻塞温度所对应的杂质浓度差... 文章介绍了测定钠中杂质浓度的手动阻塞计的原理、装置和实验结果。为了减少测量误差,我们研究了影响准确测定阻塞温度的因素,并且找到了减少测量误差的办法。在同样的杂质饱和温度下,该阻塞计测得的高、低阻塞温度所对应的杂质浓度差是很接近的。对氧其差值为1.03ppm;对氢为0.0763ppm。 展开更多
关键词 阻塞计 手动式 杂质 测定
下载PDF
阻塞计的校准方法研究 被引量:3
4
作者 李文龙 禹春利 +2 位作者 谢淳 徐迟 李煦 《原子能科学技术》 EI CAS CSCD 北大核心 2018年第11期2033-2037,共5页
阻塞计是监测钠中杂质浓度水平的最重要的在线测量仪表,为提高阻塞计的测量精度,提出了一种新的校准方法——冷阱控制法。实验通过控制冷阱冷点温度来控制钠中杂质的饱和温度,进而对阻塞计进行校准。实验中采用闭环控制模型准确控制了... 阻塞计是监测钠中杂质浓度水平的最重要的在线测量仪表,为提高阻塞计的测量精度,提出了一种新的校准方法——冷阱控制法。实验通过控制冷阱冷点温度来控制钠中杂质的饱和温度,进而对阻塞计进行校准。实验中采用闭环控制模型准确控制了冷阱冷点的温度,冷阱冷点温度的波动范围为±0.5℃。共进行了28组实验,通过实验得到了阻塞温度的经验校准曲线。阻塞温度经校准后,校准值与理论值间偏差的范围为-0.654~0.653μg/g,平均绝对偏差为0.298μg/g,平均相对标准偏差为4.40%,校准曲线的残差概率图散点基本上呈直线趋势,残差服从正态分布,校准曲线的可信度较高。冷阱控制法较为简单,易于推广,该方法对阻塞计校准后,可提高其测量准确度。 展开更多
关键词 阻塞计 校准 阻塞温度 冷阱控制法
下载PDF
阻塞计样机误差分析与研究
5
作者 李煦 李文龙 《产业与科技论坛》 2020年第16期44-46,共3页
本文研究阻塞计样机的误差假设、来源分析和误差评定。从阻塞计阻塞孔的加工误差、阻塞温度的测量误差、阻塞孔冷却速率的控制误差等来源对阻塞计的测量误差进行评定,评价的结论为研发的阻塞计的测量误差能够满足要求。
关键词 金属钠 钠净化 阻塞计 误差分析
下载PDF
FFR一次辅助系统阻塞计氮气冷却系统实验研究
6
作者 张忠 洪顺章 禹春利 《原子能科学技术》 EI CAS CSCD 北大核心 1993年第6期533-539,共7页
文章论证了我国第一座快堆FFR一次辅助系统阻塞计冷却系统的设计方案;并根据FFR一次辅助系统中阻塞计的设计参数、工作条件,实验给出了模拟不同阻塞计维持功率的情况下,氮气冷却系统的温度特性曲线;分析了此氮气冷却系统的热交换能力,... 文章论证了我国第一座快堆FFR一次辅助系统阻塞计冷却系统的设计方案;并根据FFR一次辅助系统中阻塞计的设计参数、工作条件,实验给出了模拟不同阻塞计维持功率的情况下,氮气冷却系统的温度特性曲线;分析了此氮气冷却系统的热交换能力,实验证明该氮气冷却系统能够保证FFR一次辅助系统阻塞计以程控模式工作。 展开更多
关键词 阻塞计 氮气冷却系统 快堆 传热
下载PDF
一种钠钾合金自动阻塞计的实验研究
7
作者 王泽鸣 柴宝华 +2 位作者 龙俞伊 冯波 韩冶 《核科学与工程》 CAS CSCD 北大核心 2022年第5期1053-1058,共6页
阻塞计可以在液态金属工质充装前和系统运行期间实现非金属杂质含量的定量测量和实时监测,目前我国仅开展了钠阻塞计的相关实验研究工作,为满足钠钾合金系统的杂质测量需求,本文分析了阻塞孔内的流动特性和杂质的析出过程,总结出了阻塞... 阻塞计可以在液态金属工质充装前和系统运行期间实现非金属杂质含量的定量测量和实时监测,目前我国仅开展了钠阻塞计的相关实验研究工作,为满足钠钾合金系统的杂质测量需求,本文分析了阻塞孔内的流动特性和杂质的析出过程,总结出了阻塞孔的设计理论依据,并引入响应滞后系数,完成了钠钾合金自动阻塞计工程样机的设计制造,在高温电磁泵回路上完成了该阻塞计的实验研究,对照冷阱的运行温度验证了阻塞温度的准确性,研究还表明本台阻塞具有较好的工作稳定性,阻塞温度的随机误差不超过1%。此后通过测量实验独立分析了流速和降温速率对阻塞温度的影响,建议阻塞孔内流速大于0.7 m/s,降温速率在1.5~2.5℃/min。 展开更多
关键词 自动阻塞计 钠钾合金 非金属杂质
下载PDF
液态钠杂质测量仪—阻塞计
8
作者 桑维良 张建民 《核工业自动化》 1990年第2期28-30,共3页
关键词 液态 杂质 阻塞计 测量 反应堆
下载PDF
Numerical Analysis of a Blocking Mass Attenuating Wave Propagation
9
作者 王献忠 姚熊亮 +1 位作者 王强勇 吕帅 《Journal of Marine Science and Application》 2011年第4期490-494,共5页
Based on wave theory, blocking mass impeding propagation of flexural waves was analyzed with force excitation applied on a ship pedestal. The analysis model of a complex structure was developed by combining statistica... Based on wave theory, blocking mass impeding propagation of flexural waves was analyzed with force excitation applied on a ship pedestal. The analysis model of a complex structure was developed by combining statistical energy analysis and the finite element method. Based on the hybrid FE-SEA method, the vibro-acoustic response of a complex structure was solved. Then, the sound radiation of a cylindrical shell model influenced by blocking mass was calculated in mid/high frequency. The result shows that blocking mass has an obvious effect on impeding propagation. The study provides a theoretical and experimental basis for application of the blocking mass to structure-borne sound propagation control. 展开更多
关键词 blocking mass deterministic method statistical energy method hybrid method
下载PDF
MAP based blocking artifact reduction for DCT domain distributed video coding
10
作者 Liu Hongbin Zhao Debin +1 位作者 Ma Siwei Gao Wen 《High Technology Letters》 EI CAS 2012年第1期77-83,共7页
This paper proposes a maximum a posteriori (MAP) based blocking artifact reduction algorithm for discrete cosine transform (DCT) domain distributed video coding, in which the SI and the initial reconstructed Wyner... This paper proposes a maximum a posteriori (MAP) based blocking artifact reduction algorithm for discrete cosine transform (DCT) domain distributed video coding, in which the SI and the initial reconstructed Wyner-Ziv (WZ) frame are utilized to further estimate the original WZ frame. Though the MAP estimate improves quality of the artifact region, it also leads to over-smoothness and decreases quality of the non-artifact region. To overcome this problem, a criterion is presented to discriminate the artifact and the non-artifact region in the initial reconstructed WZ frame, and only the artifact region is updated with the MAP estimate. Simulation results show that the proposed algorithm provides obvious improvement in terms of both objective and subjective evaluations. 展开更多
关键词 distributed video coding(DVC) blocking artifact reduction maximum a posteriori(MAP)
下载PDF
A New Congestion Prevention Policy for the Router
11
作者 李拥军 周文慧 齐德昱 《Journal of Shanghai Jiaotong university(Science)》 EI 2006年第3期286-289,共4页
The performance of one router will degrade and the network will have congestion because many packets arrive in the router at the same time. A new congestion prevention policy for router, which is based on the M/G/1 re... The performance of one router will degrade and the network will have congestion because many packets arrive in the router at the same time. A new congestion prevention policy for router, which is based on the M/G/1 retrial queue with Bernoulli vacation and generic retrial, vacation, setup and service time, is proposed. In this policy, the packets from other routers find the router busy and the packets will be queued in the orbit in accordance with a first-in-first-out (FIFO) discipline which the router starts to process. Only the packet at the head of the queue is allowed access to the router for processing. The ergodical condition of this model is analyzed and the probability generating functions of content of system are obtained. At last, some performance measures and numerical results are given. 展开更多
关键词 congestion prevention retrial queue first-in-first-out (FIFO)
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部