阻燃性氯磺化聚乙烯

本文综述了阻燃性材料氯磺化聚乙烯加工的物理化学基础。

21世纪初世界塑料包装材料发展展望

本文扼要介绍了世界塑料包装材料的发展概况，重点对２１世纪初世界塑料包装材料的发展趋向进行展望，并分析评述了塑料包装和环保的关系。

HQ管反声消声器的仿真分析及实验研究

基于管道无气流和平面声波传播模式建立了HQ管反声消声器传声损失的数学模型,并对单HQ管、串联HQ管及具有微穿、阻性材料内衬复合HQ管消声器进行了仿真计算和实验研究;依据分析研究结果,还探索了HQ管消声器的工程应用问题。

Generalized megaviscera of lupus:Refractory intestinal pseudo-obstruction,ureterohydronephrosis and megacholedochus

Dilated dysfunction involving multiple visceral organs has been reported in patients with systemic lupus erythematosus （SLE）. Chronic intestinal pseudoobstruction （CIPO） resulting from intestinal smooth muscle damage has presented in conjunction with ureterohydronephrosis and, more rarely, biliary dilatation （megacholedochus）. While the molecular pathogenesis is largely unknown, observed histopathologic features include widespread myositis, myocyte necrosis in the intestinal muscularis propria with subsequent atrophy and fibrosis, preserved myenteric innervations and little vasculitis. High dose immunosuppression usually results in resolution of symptoms with recovery of smooth muscle function, indicative of an autoimmune etiology. We report a patient with SLE who presented with intestinal pseudo-obstruction, ureterohydronephrosis and megacholedochus, and present images that illustrate megaviscera simultaneously involving all 3 visceral organs. Since the co-manifestation of all 3 is unusual and has been reported only once previously, we have termed this rare clinical syndrome generalized megaviscera of lupus （GML）. Although the SLE disease-activity parameters responded to aggressive immunomodulative therapy in our patient, clinical evidence of peristaltic dysfunction persisted in all involved viscera. This is a variation from the favorable outcomes reported previously in SLE patients with GML and we attribute this poor clinical outcome to disease severity and, most importantly, delayed clinical presentation. Since inflammation followed by atrophy and fibrosis are key aspects in the pathogenesis and natural history of GML, the poor response in our patient who presented late in the clinical course may be the result of ＇burnt out＇ inflammation with irreversible end-stage fibrosis. Thus, early recognition and timely initiation of treatment may be the key to recover visceral peristaltic function in patients with GML.

Tribological and flame retardant modification of polyamide-6 composite

A series of wear and flame resistant polyamide 6(PA6)composites were prepared using glass fiber(GF)and talc(T)as reinforcer,polytetrafluoroethylene(PTFE)and graphite(Gr)as solid lubricants,red phosphorus(RP)and zinc borate(ZB)as flame retardant.The tribological property,mechanical property,flame retardant property and the flame retardant mechanism were investigated.The tests show that the formula of the wear resistant PA6 composite(WRPA 6)is PA6/GF/T/PTFE/Gr in the ratio of 100/15/5/10/5 by mass.Because this composite exhibits the lowest friction coefficient(0.1429)and no wear mass loss,the introduction of RP and ZB can increase the flame resistance of WRPA6,and the synergistic effect of RP and ZB is obtained.Detailedly,the composite with 4 parts of ZB and 12 parts of RP shows the best flame retardant property,achieving the highest limiting oxygen index(LOI)(30.2 vol%)and a UL94 V-0 rating,and the flame retardant mechanisms may be gas phase along with condense phase mechanism.

Theoretical analysis and experimental investigation of a high-performance viscoelastic material shock absorber

To improve the performance of traditional mechanical shock absorber, a new type of high molecular polymer is formulated and applied to overloaded vehicle shock absorber. According to the operating principle of high-performance viscoelastic material shock absorber, the geometrical structure of shock absorber is designed and machined. Then its theoretical model is derived by using analytical method, and the impact test is carried out on high-performance viscoelastic material shock absorber. The results show that experimental and theoretical damping force curves have good agreement, which validates the credibility of theoretical model. The investigation provides a potential way to enhance damping performance and increase vehicle load.

Study on the Properties of Microcapsulated Chlorocyclophosphazene Polypropylene Composites

Microcapsulated chlorocyclophosphazenes were synthesized,and then microcapsulated chlorocyclo- phosphazene/polypropylene(PP)composites were prepared.The results showed that microcapsulated chlorocyclo- phosphazene had good high thermal stability through thermogravimetric analysis(TGA).The flammability and mechanical properties of microcapsulated chlorocyclophosphazene/polypropylene composites were investigated by limiting oxygen index experiment,UL 94V flame retardancy test,cone calorimetry,tensile experiment,and impact test,respectively.It was shown that the microcapsulated chlorocyclophosphazene/PP composites had better tensile strength,impact strength,flame retardant properties and smoke suppress properties compared with chlorocyclo- phosphazene/PP composites.

Flame Retardancy Evaluation of Nanocomposites Prepared from Sawdust and Montmorillonite Clay

Composites of montmorillonite clay and sawdust were prepared with the desired result being having new materials which burn longer than unmodified sawdust. The three forms of clay used for preparation of composites were unmodified montmorillonite, mono-ionic montmorillonite and organically modified montmorillonite. Montmorillonite clay was converted to mono-ionic clay by ion exchange with sodium using a sodium chloride solution. The mono-ionic clay was organically modified with an organic surfactant, methyl triphenyl phosphonium bromide. Nanocomposites were then prepared by combining the modified and raw forms of the clay with sawdust. The solution blending method was used to make the nanocomposites. The samples were analysed using thermogravimetric analysis and cone calorimetry. The studies showed that the nanocomposite which was made from sawdust and 1% organically modified clay had the most improved results in terms of burning time and thermal stability, as well as giving a calorific value closest to unmodified sawdust and the least amount of residue.

Dynamic analytic model of mechanism with links fabricated from symmetric laminates

A four-bar linkage mechanism with links fabricated from symmetric laminates was studied. The mass matrix of the beam dement was obtained in light of the mass distribution characteristics of composite materials. The stiffness matrix of the beam element was derived from the constitutive equations of each layer and the relationship between the strain distribution and the node displacement of the beam element. The specific damping capacity of the beam element was analyzed according to the strain distribution of the beam element and the strain energy dissipation caused by vibration in each direction of each layer; and the damping coefficients were obtained according to the principle that the total energy dissipation of the beam element was equal to the work done by the equivalent damping force during a cycle of vibration, from which the damping matrix of the dynamic equations was obtained. Using the finite element method, the dynamic analytic model of the mechanism was obtained. The dynamic responses and natural frequency of the mechanism were obtained by simulation, respectively, and those of the simulation obtained by the proposed model were analyzed and compared with the results obtained by the conventional model. The work provides theoretical basis to a certain extent for the further research on nonlinear vibration characteristics and optimum design of this kind of mechanism.

Research on Thermal Properties of Nomex Fiber and Nomex/Viscose Blended Fabric

Based on the analysis of the properties of Nomex 450 and Nomex 462,the thermal properties of Nomex 462/Lenzing Viscose Flame retardent(FR)blending materials were analyzed.It was discovered through burning test and Thermal Gravity(TG)analysis that the blended material was superior in thermal behaviors to the material made from either Nomex or Viscose FR filament,when the ratio of Nomex and Lenzing Viscose FR reached 80∶20,and excellent thermal properties were achieved with the value of Limiting Oxygen Index(LOI)up to 36.1%.Blending Nomex and Viscose FR filaments may be recommended for better fire retardant property of related fabric.

Modification of HDPE filling with pelagic clay

In order to improve the properties of HDPE, the authors used the method of suspended diffusion for purification the pelagic clay, used silane coupling agent to increase its organic activation, and prepared the composites of organic pelagic clay/HDPE by inching them in different conditions. The affections of process conditions and quantity of pelagic clay to the properties of composites were analyzed by testing their mechanical properties, thermo stability and barrier properties. According to test the structure of composites, it is indicated that pelagic clay has good compatibility with HDPE. The result shows that the pelagic clay can improve mechanical properties, thermo stability and barrier properties of HDPE properties effectively.

Preparation and electrochemical properties of Co_3O_4/graphite composites as anodes of lithium ion batteries

Co3O4/graphite composites were synthesized by precipitation of cobalt oxalate on the surface of graphite and pyrolysis of the precipitate, and the effects of graphite content and calcination temperature on the electrochemical properties of the composites were investigated. The samples were characterized by thermogravimetry and differential thermal analysis （TG/DTA）, X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, cyclic voltammetry （CV）, electrochemical impedance spectroscopy （EIS） and charge/discharge measurements. With increasing the graphite content, the reversible capacity of the Co3O4/graphite composites decreases, while cycling stability improves dramatically, and the addition of graphite obviously decreases the average potential of lithium intercalation/deintercalation. The reversible capacity of the composites with 50% graphite rises from 583 to 725 mA-h/g as the calcination temperature increases from 300 to 500 ℃, and the Co304/graphite composites synthesized at 400 ℃ show the best cycling stability without capacity loss in the initial 20 cycles. peaks, corresponding to the lithium intercalaction/deintercalation for The CV profile of the composite presents two couples of redox graphite and Co3O4, respectively. EIS studies indicate that the electrochemical impedance decreases with increasing the graphite content.

Flame Retardants Nanocomposites-Synergistic Effect of Combination Conventional Retardants with Nanofillers of the Flammability of Thermoset Resins

The consumption ofthermoset resins as building polymers is approximately over one million tone word wide. The thermoset resins are proven construction materials for the technical and highly demanding applications of the transportation, electrical and building part industry. Heat stability, high thermal, low shrinkage, excellent mechanical properties are typical for their type of polymers. Above applications in addition to the mechanical properties also require good flame retardants of the materials. Undertaken activities refer to official draft, laws and legal recommendations in UE states. This paper presents positive effect of reduced flammability of thermoset resins （unsaturated polyester and epoxy resins） thanks to the use of nanocomposites containing multi-ingredient halogen-flee flame retardants which combine conventional phosphorus/nitrogen modifiers interacting with nanofillers （oMMT （organomodified montmorillonite）, EG （expandable graphite）, graphene, GO （graphene oxide）, nSi （nanosilica））.

On determination of the damping factor of linear viscoelastic materials using dynamic indentation:a theoretical study

In this study,we theoretically investigate the dynamic indentation for measuring the loss (damping) factor of a linear viscoelastic material from its indentation response.A rigid indenter with arbitrary tip profile is assumed to indent into a viscoelastic substrate with arbitrary shape.We perform a theoretical analysis and identify the conditions under which the loss factor of the material can be determined from the phase angle between the applied harmonic indentation load and the corresponding harmonic displacement,a directly measurable quantity in a dynamic indentation test.To validate the conclusion drawn from our theoretical analysis,a series of numerical experiments are performed,including the spherical indentation of a soft layer with irregular surface morphology bonded to a rigid substrate,a conical indenter with tip defects indenting into a half-spherical particle,and the indentation of porous materials.This study may facilitate the use of the dynamic indentation technique to evaluate the damping properties of linear viscoelastic materials,including some advanced polymers and biological soft tissues.

Enhanced mechanical properties and flame retardancy of short jute fiber/poly(lactic acid)composites with phosphorus-based compound

In this work, a phosphorous-based compound （DOPO-ICN） was obtained by a two-step process. 9,10-dihydro-9-oxa-10- phosphaphenanthrene-10-oxide （DOPO） reacted with formaldehyde firstly, followed with reacting with 1,6-hexane diisocyanate （HD1）. The chemical structure of DOPO-ICN was confirmed by Fourier transform infrared spectroscopy （FTIR） and 1H NMR. The influence of DOPO-1CN on the mechanical and flammability properties ofjute/PLA composites was studied. Compared to DOPO, DOPO-ICN improved the tensile, flexural and impact strength of the flame retardant jute/PLA composites. Moreover, the flammability ofjute/PLA composites with different DOPO and DOPO-MA loading was investigated by thermogravimetric analysis （TGA）, UL 94 test and limiting oxygen index （LOI） measurements. The results showed that DOPO-ICN imparted the flame retardancy to the jute/PLA composites.

Electrochemical properties of Co-S/x wt.% AB_5 composite materials

The Co-S/x wt.% AB5 （x=0, 10, 20, 30） composite materials were prepared by simply mixing Co-S material fabricated by hy- drothermal method and AB5 alloy. The structure and morphology of the composite materials were characterized by XRD and SEM, respectively. The electrochemical properties of the composite electrodes were studied by the galvanostatic charge, dis- charge test and electrochemical impedance spectroscopy. The results showed that the Co-S/20 wt.% AB5 composite electrode showed the highest discharge capacity and the best cycling stability. The existence of the AB5 alloy improved the electro- chemical activity of composite electrodes, reduced the electrochemical polarization resistances and promoted the electrochem- ical conversion reaction between Co and Co（OH）2. In order to improve the utilization rate of active materials, 0.0! mol/L Na2S203 was added into the electrolyte. The electrochemical properties of the composite electrode were significantly enhanced. After fifty cycles, the discharge capacity of the composite electrode increased from 407 to 481.7 mAh/g and the capacity reten- tion increased from 79.7% to 91.2%.

Synergetic effects of blended materials for Lithium-ion batteries

LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2, LiMn_2O_4 and LiCoO_2 are paired to make the blended materials for the cathode of lithium-ion batteries. The factors impacting on the characteristics of blended materials are studied using constant current charge/discharge measurement and electrochemical impedance spectroscopy. The results show that the three pairs of blended materials exhibit very different synergetic effects in high C-rate discharging. The mechanism of particle synergetic effect has a physical root on the compensating material property of blending components, which fundamentally correlates with their similarity and difference in crystalline and electronic structures. The AC impedance show the obvious changes that alternate the high C-rate performance, due to reduced particle impedance in blended materials. The pairs of LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2-LiMn_2O and LiCoO_2-LiMn_2O_4 present obvious increases in high C-rate reversible capacities than does the pair LiCoO_2-LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2.

Ultra-low charge transfer resistance carbons by onepot hydrothermal method for glucose sensing

Hydrothermal carbon （HTC） is typically well- dispersed, but it remains a great challenge for HTC to become conductive. Co-doping with heteroatoms has been confirmed to be an effective strategy to significantly promote the electrical conductivity of carbon. Moreover, there is no simple and green method to construct sensitive HTC based electro- chemical biosensors until now. In this paper, N and S dual-doped carbon （NS-C） with ultra-low charge transfer resistance is easily synthesized from L-cysteine and glucose in a hydrothermal reaction system. The morphology, structural prop- erties and electrochemical properties of the as-prepared NS-C are analyzed. In comparison with the undoped hydrothermal （UC） modified glassy carbon electrode （GCE）, the charge transfer resistance of UC （476 Ω） is ten times the value of NS- C （46 Ω）. The developed biosensor shows a better performance to detect glucose in a wide concentration range （50-2500 μmol L^-1） with the detection limit of 1.77 μmol L^-1 （S/N-3） and a high sensitivity （0.0554 μA cm^-2μmol^-1 L）. The apparent Michaelis-Menten constant value of GCE/NS-C/GOx/nafion modified electrode is 0.769 mmol L^-1, indicating a high affinity of glucose oxidase to glucose. These results demonstrate that the hydrothermal method is an effective way for prepar- ing high electrical conductivity carbon with excellent performances in biosensor application.