The flammability characterization and thermal composition of polymers flame retarded by decabromodiphenylethane (DBDPE) and antimony trioxide (Sb2O3) were studied by cone calorimeter and thermogravimetry (TG). The res...The flammability characterization and thermal composition of polymers flame retarded by decabromodiphenylethane (DBDPE) and antimony trioxide (Sb2O3) were studied by cone calorimeter and thermogravimetry (TG). The results show that ABS/DBDPE/Sb2O3 has the similar flammability parameters and thermal composition curves to ABS/DBDPO/Sb2O3. It suggests that DBDPE/Sb2O3 has the similar flame retardant behavior to DBDPO/Sb2O3. The heat release rate (HRR) and the effect heat combustion (EHC) curves of polymers flame retarded by DBDPE/Sb2O3 all decrease, but the mass loss rate (MLR) curve slightly increase. It shows that the decrease of HRR is not due to the increase of char formation ratio but the generation of incombustible gases. The major flame retardant mechanism of DBDPE/Sb2O3 is gas phase flame retardant mechanism. Increasing content of Sb2O3 in DBDPE/Sb2O3 can improve the flame retardant property and thermal stability of acrylonitrile butadiene styrene. Sb2O3 has a good synergistic effect with DBDPE.展开更多
Organic dust flames deal with a field of science in which many complicated phenomena like pyrolysis or devolatization of solid particles and combustion of volatile particles take place. One-dimensional flame propagati...Organic dust flames deal with a field of science in which many complicated phenomena like pyrolysis or devolatization of solid particles and combustion of volatile particles take place. One-dimensional flame propagation in cloud of fuel mixture is analyzed in which flame structure is divided into three zones. The first zone is preheat zone in which rate of the chemical reaction is small and transfer phenomena play significant role in temperature and mass distributions. In this model, it is assumed that particles pyrolyze first to yield a gaseous fuel mixture. The second zone is reaction zone where convection and vaporization rates of the particles are small. The third zone is convection zone where diffusive terms are negligible in comparison of other terms. Non-zero Biot number is used in order to study effect of particles thermal resistance on flame characteristics. Also, effect of particle size on combustion of micro organic dust is investigated. According to obtained results, it is understood that both flame temperature and burning velocity decrease with rise in the Biot number and particle size.展开更多
An improved numerical heat transfer model considering pyrolysis effect is proposed to predict thermal performance of heat-resistant fabric subjected to radiant heat flux. The model incorporates the heat-induced change...An improved numerical heat transfer model considering pyrolysis effect is proposed to predict thermal performance of heat-resistant fabric subjected to radiant heat flux. The model incorporates the heat-induced changes in fabric thermophysical properties. The new model has been validated with data from modified Radiant Protective Performance (RPP) tests of flame-resistant cotton fabrics. Comparison with experimental data shows that the predictions of mass loss rates and temperature profiles within the charring material and skin simulant are in reasonably good agreement with the experiments. Results from the numerical model contribute to a better understanding of the heat transfer process within flame-resistant fabrics under high heat flux conditions, and also to establish a systematic method for analyzing heat transfer in other fibrous materials applications.展开更多
Poly(ethylene terephthalate)(PET)was synthesized by the in-situ polymerization method using layered double hydrotalcite(LDH)as the catalyst,and the thermal and flame retardation properties of PET were investigated as ...Poly(ethylene terephthalate)(PET)was synthesized by the in-situ polymerization method using layered double hydrotalcite(LDH)as the catalyst,and the thermal and flame retardation properties of PET were investigated as required.As identified by differential scanning calorimetry(DSC)and thermogravimetric(TGA)analysis,the crystallization rate and thermal degradation temperature of the as-prepared PET sample were enhanced compared with commercial PET sample.It was confirmed from the fire-resistant property study that the LDH can be used as an efficient flame-retardant besides functioning as a catalyst in the transesterification/polycondensation process for PET synthesis.展开更多
The consumption ofthermoset resins as building polymers is approximately over one million tone word wide. The thermoset resins are proven construction materials for the technical and highly demanding applications of t...The consumption ofthermoset resins as building polymers is approximately over one million tone word wide. The thermoset resins are proven construction materials for the technical and highly demanding applications of the transportation, electrical and building part industry. Heat stability, high thermal, low shrinkage, excellent mechanical properties are typical for their type of polymers. Above applications in addition to the mechanical properties also require good flame retardants of the materials. Undertaken activities refer to official draft, laws and legal recommendations in UE states. This paper presents positive effect of reduced flammability of thermoset resins （unsaturated polyester and epoxy resins） thanks to the use of nanocomposites containing multi-ingredient halogen-flee flame retardants which combine conventional phosphorus/nitrogen modifiers interacting with nanofillers （oMMT （organomodified montmorillonite）, EG （expandable graphite）, graphene, GO （graphene oxide）, nSi （nanosilica））.展开更多
Polymer nanocomposites are a new class of flame retarded materials which have attracted much attention and considered as a revolutionary new flame retardant approach.A very small amount of nano flame retardants (norma...Polymer nanocomposites are a new class of flame retarded materials which have attracted much attention and considered as a revolutionary new flame retardant approach.A very small amount of nano flame retardants (normally < 5 wt%) can significantly reduce the heat release rate (HRR) and smoke emission (SEA) during the combustion of polymer materials.Moreover,the addition of nano flame retardants can also improve the mechanical properties of polymer materials compared with the deterioration of traditional flame retardants.This paper reviews the recent development in the flame retardant field of polymer nanocomposites and also introduces the related research in our lab.The challenges and problems are discussed and the future development of flame retarded polymer nanocomposites is prospected.展开更多
The thermal choking phenomenon is of great importance in an inlet isolator in dual-mode ram jet/scramjet combustor. In some cases the choked flow creates a pseudo-shock wave including a shock train in it at the engine...The thermal choking phenomenon is of great importance in an inlet isolator in dual-mode ram jet/scramjet combustor. In some cases the choked flow creates a pseudo-shock wave including a shock train in it at the engine inlet and causes large amounts of drag and radically reduces the performance of the engine at high flight Mach numbers. The present paper describes a one-dimensional flow model taking account of the upstream boundary-layer as well as heat addition by using a mass-weighted av- eraging technique. The simple relationships for the flow field in a constant area duct in which the effect of the upstream boundary-layer is considered but the effect of the wall friction in the duct can be neglected are presented. The results of the calculation such as the maximum heat addition when the thermal choking occurs, the downstream Mach number and the static pressure ratio are presented and examined in detail.展开更多
基金Project(20574020) supported by the National Natural Science Foundation of China
文摘The flammability characterization and thermal composition of polymers flame retarded by decabromodiphenylethane (DBDPE) and antimony trioxide (Sb2O3) were studied by cone calorimeter and thermogravimetry (TG). The results show that ABS/DBDPE/Sb2O3 has the similar flammability parameters and thermal composition curves to ABS/DBDPO/Sb2O3. It suggests that DBDPE/Sb2O3 has the similar flame retardant behavior to DBDPO/Sb2O3. The heat release rate (HRR) and the effect heat combustion (EHC) curves of polymers flame retarded by DBDPE/Sb2O3 all decrease, but the mass loss rate (MLR) curve slightly increase. It shows that the decrease of HRR is not due to the increase of char formation ratio but the generation of incombustible gases. The major flame retardant mechanism of DBDPE/Sb2O3 is gas phase flame retardant mechanism. Increasing content of Sb2O3 in DBDPE/Sb2O3 can improve the flame retardant property and thermal stability of acrylonitrile butadiene styrene. Sb2O3 has a good synergistic effect with DBDPE.
文摘Organic dust flames deal with a field of science in which many complicated phenomena like pyrolysis or devolatization of solid particles and combustion of volatile particles take place. One-dimensional flame propagation in cloud of fuel mixture is analyzed in which flame structure is divided into three zones. The first zone is preheat zone in which rate of the chemical reaction is small and transfer phenomena play significant role in temperature and mass distributions. In this model, it is assumed that particles pyrolyze first to yield a gaseous fuel mixture. The second zone is reaction zone where convection and vaporization rates of the particles are small. The third zone is convection zone where diffusive terms are negligible in comparison of other terms. Non-zero Biot number is used in order to study effect of particles thermal resistance on flame characteristics. Also, effect of particle size on combustion of micro organic dust is investigated. According to obtained results, it is understood that both flame temperature and burning velocity decrease with rise in the Biot number and particle size.
文摘An improved numerical heat transfer model considering pyrolysis effect is proposed to predict thermal performance of heat-resistant fabric subjected to radiant heat flux. The model incorporates the heat-induced changes in fabric thermophysical properties. The new model has been validated with data from modified Radiant Protective Performance (RPP) tests of flame-resistant cotton fabrics. Comparison with experimental data shows that the predictions of mass loss rates and temperature profiles within the charring material and skin simulant are in reasonably good agreement with the experiments. Results from the numerical model contribute to a better understanding of the heat transfer process within flame-resistant fabrics under high heat flux conditions, and also to establish a systematic method for analyzing heat transfer in other fibrous materials applications.
文摘Poly(ethylene terephthalate)(PET)was synthesized by the in-situ polymerization method using layered double hydrotalcite(LDH)as the catalyst,and the thermal and flame retardation properties of PET were investigated as required.As identified by differential scanning calorimetry(DSC)and thermogravimetric(TGA)analysis,the crystallization rate and thermal degradation temperature of the as-prepared PET sample were enhanced compared with commercial PET sample.It was confirmed from the fire-resistant property study that the LDH can be used as an efficient flame-retardant besides functioning as a catalyst in the transesterification/polycondensation process for PET synthesis.
文摘The consumption ofthermoset resins as building polymers is approximately over one million tone word wide. The thermoset resins are proven construction materials for the technical and highly demanding applications of the transportation, electrical and building part industry. Heat stability, high thermal, low shrinkage, excellent mechanical properties are typical for their type of polymers. Above applications in addition to the mechanical properties also require good flame retardants of the materials. Undertaken activities refer to official draft, laws and legal recommendations in UE states. This paper presents positive effect of reduced flammability of thermoset resins （unsaturated polyester and epoxy resins） thanks to the use of nanocomposites containing multi-ingredient halogen-flee flame retardants which combine conventional phosphorus/nitrogen modifiers interacting with nanofillers （oMMT （organomodified montmorillonite）, EG （expandable graphite）, graphene, GO （graphene oxide）, nSi （nanosilica））.
基金financially supported by the National Natural Science Foundation of China (50873092 and 51073140)
文摘Polymer nanocomposites are a new class of flame retarded materials which have attracted much attention and considered as a revolutionary new flame retardant approach.A very small amount of nano flame retardants (normally < 5 wt%) can significantly reduce the heat release rate (HRR) and smoke emission (SEA) during the combustion of polymer materials.Moreover,the addition of nano flame retardants can also improve the mechanical properties of polymer materials compared with the deterioration of traditional flame retardants.This paper reviews the recent development in the flame retardant field of polymer nanocomposites and also introduces the related research in our lab.The challenges and problems are discussed and the future development of flame retarded polymer nanocomposites is prospected.
文摘The thermal choking phenomenon is of great importance in an inlet isolator in dual-mode ram jet/scramjet combustor. In some cases the choked flow creates a pseudo-shock wave including a shock train in it at the engine inlet and causes large amounts of drag and radically reduces the performance of the engine at high flight Mach numbers. The present paper describes a one-dimensional flow model taking account of the upstream boundary-layer as well as heat addition by using a mass-weighted av- eraging technique. The simple relationships for the flow field in a constant area duct in which the effect of the upstream boundary-layer is considered but the effect of the wall friction in the duct can be neglected are presented. The results of the calculation such as the maximum heat addition when the thermal choking occurs, the downstream Mach number and the static pressure ratio are presented and examined in detail.
