Wastewater treatment is a process that is vital to protecting both the environment and human health. At present, the most cost-effective way of treating wastewater is with biological treatment processes such as the ac...Wastewater treatment is a process that is vital to protecting both the environment and human health. At present, the most cost-effective way of treating wastewater is with biological treatment processes such as the activated sludge process, despite their long operating times. However, population increases have created a demand for more efficient means of wastewater treatment, Fluidization has been demonstrated to in- crease the efficiency of many processes in chemical and biochemical engineering, but it has not been widely used in large-scale wastewater treatment. At the University of Western Ontario, the circulating fluidized-bed bioreactor (CFBBR) was developed for treating wastewater. In this process, carrier particles develop a biofilm composed of bacteria and other microbes. The excellent mixing and mass transfer characteristics inherent to fluidization make this process very effective at treating both municipal and industrial wastewater. Studies of lab- and pilot-scale systems showed that the CFBBR can remove over 90% of the influent organic matter and 80% of the nitrogen, and produces less than one-third as much biological sludge as the activated sludge process. Due to its high efficiency, the CFBBR can also be used to treat wastewaters with high organic solid concentrations, which are more difficult to treat with conventional methods because they require longer residence times; the CFBBR can also be used to reduce the system size and footprint. In addition, it is much better at handling and recovering from dynamic loadings (i.e., varying influent volume and concentrations) than current systems. Overall, the CFBBR has been shown to be a very effective means of treating wastewa- ter, and to be capable of treating larger volumes of wastewater using a smaller reactor volume and a shorter residence time. In addition, its compact design holds potential for more geographically localized and isolat- ed wastewater treatment systems.展开更多
Particulate emission is a major problem in industrial processes, mainly power plants that make use of coal as a primary source of energy. Stringent emissions limits, set by government organisations requires industries...Particulate emission is a major problem in industrial processes, mainly power plants that make use of coal as a primary source of energy. Stringent emissions limits, set by government organisations requires industries to conform to these limits to ensure that air quality is sustained and with minimum pollutant present. Electrostatic precipitators are typically used to filter and collect these particulate emissions. Fly ash resistivity is a primary parameter in the collection of particulate emissions, and there is a resistivity range at which electrostatic precipitator collection is most efficient and anything outside this range limits, their operation. High resistivity ash results in back-corona discharge, whilst low resistivity results in particle re-entrainment into the flue gas stream. The purpose of this paper is to investigate and obtain a fly ash resistivity profile for existing power plants in South Africa. Ash samples obtained from power plants are, tested making use of an ash-resistivity test oven, in accordance with IEEE Standard 548-1984. This paper discusses obtained experimental results, to determine the resistivity profile at which South African power plant electrostatic precipitators operate. The electrical efficiency of the electrostatic precipitator system is evaluated based on the obtained resistivity profiles.展开更多
文摘Wastewater treatment is a process that is vital to protecting both the environment and human health. At present, the most cost-effective way of treating wastewater is with biological treatment processes such as the activated sludge process, despite their long operating times. However, population increases have created a demand for more efficient means of wastewater treatment, Fluidization has been demonstrated to in- crease the efficiency of many processes in chemical and biochemical engineering, but it has not been widely used in large-scale wastewater treatment. At the University of Western Ontario, the circulating fluidized-bed bioreactor (CFBBR) was developed for treating wastewater. In this process, carrier particles develop a biofilm composed of bacteria and other microbes. The excellent mixing and mass transfer characteristics inherent to fluidization make this process very effective at treating both municipal and industrial wastewater. Studies of lab- and pilot-scale systems showed that the CFBBR can remove over 90% of the influent organic matter and 80% of the nitrogen, and produces less than one-third as much biological sludge as the activated sludge process. Due to its high efficiency, the CFBBR can also be used to treat wastewaters with high organic solid concentrations, which are more difficult to treat with conventional methods because they require longer residence times; the CFBBR can also be used to reduce the system size and footprint. In addition, it is much better at handling and recovering from dynamic loadings (i.e., varying influent volume and concentrations) than current systems. Overall, the CFBBR has been shown to be a very effective means of treating wastewa- ter, and to be capable of treating larger volumes of wastewater using a smaller reactor volume and a shorter residence time. In addition, its compact design holds potential for more geographically localized and isolat- ed wastewater treatment systems.
文摘Particulate emission is a major problem in industrial processes, mainly power plants that make use of coal as a primary source of energy. Stringent emissions limits, set by government organisations requires industries to conform to these limits to ensure that air quality is sustained and with minimum pollutant present. Electrostatic precipitators are typically used to filter and collect these particulate emissions. Fly ash resistivity is a primary parameter in the collection of particulate emissions, and there is a resistivity range at which electrostatic precipitator collection is most efficient and anything outside this range limits, their operation. High resistivity ash results in back-corona discharge, whilst low resistivity results in particle re-entrainment into the flue gas stream. The purpose of this paper is to investigate and obtain a fly ash resistivity profile for existing power plants in South Africa. Ash samples obtained from power plants are, tested making use of an ash-resistivity test oven, in accordance with IEEE Standard 548-1984. This paper discusses obtained experimental results, to determine the resistivity profile at which South African power plant electrostatic precipitators operate. The electrical efficiency of the electrostatic precipitator system is evaluated based on the obtained resistivity profiles.