Plasma electrolytic oxidation（PEO） was developed as a bond coat for air plasma sprayed（APS） nanostructure ZrO2 as top coat to enhance the corrosion resistance and antibacterial activity of Mg alloy. Corrosion beha...Plasma electrolytic oxidation（PEO） was developed as a bond coat for air plasma sprayed（APS） nanostructure ZrO2 as top coat to enhance the corrosion resistance and antibacterial activity of Mg alloy. Corrosion behavior and antibacterial activities of coated and uncoated samples were assessed by electrochemical tests and agar diffusion method toward Escherichia coli（E. coli） bacterial pathogens, respectively. The lowest corrosion current density and the highest charge transfer resistance, phase angle and impedance modulus were observed for PEO/nano-ZrO2 coated sample compared with those of PEO coated and bare Mg alloys. Nano-ZrO2 top coat which has completely sealed PEO bond coat is able to considerably delay aggressive ions transportation towards Mg alloy surface and significantly enhances corrosion resistance of Mg alloy in simulated body fluid（SBF） solution. Moreover, higher antibacterial activity was also observed in PEO/nano-ZrO2 coating against bacterial strains than that of the PEO coated and bare Mg alloys. This observation was attributed to the presence of ZrO2 nanoparticles which decelerate E. coli growth as a result of E. coli membranes.展开更多
Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this ...Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this evaluation, an elastoplastic analysis was used to estimate critical COD values for single edge notched bending （SENB） specimens. The relationship between fracture toughness （Kic） and critical COD for SENB specimens was obtained. Microstructure of the interface between AleO3-TiO2 composite ceramic coatings and AISI 1045 steel substrates was studied by using scanning electron microscope （SEM）. Chemical compositions were clarified by energy-dispersive X-ray spectroscopy （EDS）. The results show that the interface between of Al203-TiO2 and substrate has mechanical combining. The nanohardness of the coatings can reach 1 200 GPa examined by nanoindentation. The Klc was calculated according to this relationship from critical COD. The bending process produces a significant relationship of COD independent of the axial force applied. Fractographic analysis was conducted to determine the crack length. From the physical analysis of nanoindentation curves, the elastic modulus of 1045/AI2O3-TiO2 is 180 GPa for the 50 μm film. The highest value of fracture toughness for 1045/A1203-TiO2-250 μm is 348 MPa·mv2.展开更多
基金the Universiti Teknologi Malaysia (UTM) for providing research facilities and financial support under Grants No:(1)UTM-Research University Grant (RUG) (Q.J130000.2524.16H35),and (2)Nippon Sheet Glass (NSG) R.J130000.7324.4B300
文摘Plasma electrolytic oxidation（PEO） was developed as a bond coat for air plasma sprayed（APS） nanostructure ZrO2 as top coat to enhance the corrosion resistance and antibacterial activity of Mg alloy. Corrosion behavior and antibacterial activities of coated and uncoated samples were assessed by electrochemical tests and agar diffusion method toward Escherichia coli（E. coli） bacterial pathogens, respectively. The lowest corrosion current density and the highest charge transfer resistance, phase angle and impedance modulus were observed for PEO/nano-ZrO2 coated sample compared with those of PEO coated and bare Mg alloys. Nano-ZrO2 top coat which has completely sealed PEO bond coat is able to considerably delay aggressive ions transportation towards Mg alloy surface and significantly enhances corrosion resistance of Mg alloy in simulated body fluid（SBF） solution. Moreover, higher antibacterial activity was also observed in PEO/nano-ZrO2 coating against bacterial strains than that of the PEO coated and bare Mg alloys. This observation was attributed to the presence of ZrO2 nanoparticles which decelerate E. coli growth as a result of E. coli membranes.
基金Project supported by the National Research Foundation of Korea(2011-0030804)the Korea Research Foundation(KRF2009-0076450)funded by the Korea Government(MEST)
文摘Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this evaluation, an elastoplastic analysis was used to estimate critical COD values for single edge notched bending （SENB） specimens. The relationship between fracture toughness （Kic） and critical COD for SENB specimens was obtained. Microstructure of the interface between AleO3-TiO2 composite ceramic coatings and AISI 1045 steel substrates was studied by using scanning electron microscope （SEM）. Chemical compositions were clarified by energy-dispersive X-ray spectroscopy （EDS）. The results show that the interface between of Al203-TiO2 and substrate has mechanical combining. The nanohardness of the coatings can reach 1 200 GPa examined by nanoindentation. The Klc was calculated according to this relationship from critical COD. The bending process produces a significant relationship of COD independent of the axial force applied. Fractographic analysis was conducted to determine the crack length. From the physical analysis of nanoindentation curves, the elastic modulus of 1045/AI2O3-TiO2 is 180 GPa for the 50 μm film. The highest value of fracture toughness for 1045/A1203-TiO2-250 μm is 348 MPa·mv2.
