A novel technique to fabricate ultra deep high aspect ratio electrical isolation trenches with DRIE and dielectric refill is presented.The relationship between trench profile and DRIE parameters is discussed.By optimi...A novel technique to fabricate ultra deep high aspect ratio electrical isolation trenches with DRIE and dielectric refill is presented.The relationship between trench profile and DRIE parameters is discussed.By optimizing DRIE parameters and RIE etching the trenches’ opening,the ideal trench profile is obtained to ensure that the trenches are fully refilled without voids.The electrical isolation trenches are 5μm wide and 92μm deep with 0.5μm thick oxide layers on the sidewall as isolation material.The measured I-V result shows that the trench structure has good electrical isolation performance:the average resistance in the range of 0～100V is more than 10 11Ω and no breakdown appears under 100V.This isolation trench structure has been used in fabrication of the bulk integrated micromachined gyroscope,which shows high performance.展开更多
Performances of submerged membrane bioreactor （SMBR） treating brewery wastewater were investigated in this study. With little variation of COD：TN：TP ratio （100：5：1） in influent, SMBR showed high removal effici...Performances of submerged membrane bioreactor （SMBR） treating brewery wastewater were investigated in this study. With little variation of COD：TN：TP ratio （100：5：1） in influent, SMBR showed high removal efficiency （ 〉 90% ） for both COD and NH4^＋ - N, and it also showed a strong resistive ability for shock organics loading rate, evidenced by no obvious fluctuation for COD in the effluent when the organics loading rate suddenly increased from 0. 27 g/（ gMLSS · d） to 0. 54 g/（ gMLSS · d）. Comparatively different with the COD removal, TN and TP removal showed a strong correlation with the growth stage of the sludge in SMBR. When the sludge was in the multiplication stage, about 45% of TN was removed and an average removal efficiency of 30% for TP was also observed. However, when the activated sludge was in the steady stage, the removal efficiency for TN decreased to about 30% , whereas, the removal efficiency for TP was very low, and sometimes even below zero. The results of GC/MS indicated that the residual organic matters in the effluent were mainly alkyl hydrocarbon with high molecular weight, and coupling with the results of electroseopic scanning, it is speculated that biomass formed at external and internal membrane fibers played an important role for the removal of small organics.展开更多
In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Comp...In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.展开更多
In relay cellular network, relay links will consume extra frequency resources, which makes radio resource allocation become more complex and important. A new frequency allocation scheme is proposed to increase cell ca...In relay cellular network, relay links will consume extra frequency resources, which makes radio resource allocation become more complex and important. A new frequency allocation scheme is proposed to increase cell capacity and improve signal-to-interference ratio (SIR) of users located at cell edges. By dividing cell into different parts and configuring each of these parts with a unique reuse factor, this scheme improves spectral utilization efficiency and avoids inter-cell interference effectively. Optimal combinations of reuse factors and locations of relay nodes are also addressed and investigated. Computer simulation results show that, by employing the proposed scheme, maximum cell capacity gains of about 50%, 35% and 30% can be achieved in comparison with conventional cellular network scheme, traditional reuse partitioning scheme and reuse-adjacent-cell-frequencies scheme, respectively. Moreover, since in the proposed scheme resources are dynamically allocated among relay nodes, more benefits can be obtained in comparison with fixed resource allocation schemes under non-uniform traffic distribution.展开更多
A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequenc...A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequencies are equal to those for switching off electric resistances. This paper analyzes and determines systemnatural frequencies based on a modeling method of receptances with the analysis of sub-systems model and of theprinciple of their addition and conveyor loop closure. It also puts forward to calculate the time interval for switching off electric resistances. The starting of one conveyor is simulated by lumped-mass-spring-model software tofurther illustrate the influence of time interval for switching off electric resistances on conveyor dynamic behavior. Two methods are also compared. The receptance model is proved to be an excellent alternative.展开更多
PU （polyurethane） integral skin and PVC （polyvinyl chloride） are polymeric materials which have favorable physical characteristics to reduce the impact noise when applied to floor systems. In civil construction, f...PU （polyurethane） integral skin and PVC （polyvinyl chloride） are polymeric materials which have favorable physical characteristics to reduce the impact noise when applied to floor systems. In civil construction, floating floors systems are composed of two layers above the slab： a resilient layer and, above this, a rigid layer of cement matrix that works as a subfloor. This research aims to evaluate the incorporation of PVC and PU skin waste in the resilient layer of the floating floor, for impact noise insulation. It was conducted physical, mechanical and morphological tests in the composite, as SEM （scanning electron microscopy）, determination of compressive creep, and impact noise test to evaluate the absorption capacity of the floor system over time. Furthermore, experimental results were compared with theoretical studies. These correlations may assist in understanding the behavior of impact noise damping and its relation to the size of the samples.展开更多
The properties of piezoelectric PVDF films as separators are studied in NiO/Li electrodes Li-ion power cell.The results show that the PVDF piezoelectric film with excellent insulation is suitable for the environmental...The properties of piezoelectric PVDF films as separators are studied in NiO/Li electrodes Li-ion power cell.The results show that the PVDF piezoelectric film with excellent insulation is suitable for the environmental energy harvesting application.This is attributable to the compact structure of the piezoelectric PVDF film,and which make it has low leakage current and low charge-discharge current characteristics.展开更多
文摘A novel technique to fabricate ultra deep high aspect ratio electrical isolation trenches with DRIE and dielectric refill is presented.The relationship between trench profile and DRIE parameters is discussed.By optimizing DRIE parameters and RIE etching the trenches’ opening,the ideal trench profile is obtained to ensure that the trenches are fully refilled without voids.The electrical isolation trenches are 5μm wide and 92μm deep with 0.5μm thick oxide layers on the sidewall as isolation material.The measured I-V result shows that the trench structure has good electrical isolation performance:the average resistance in the range of 0～100V is more than 10 11Ω and no breakdown appears under 100V.This isolation trench structure has been used in fabrication of the bulk integrated micromachined gyroscope,which shows high performance.
文摘Performances of submerged membrane bioreactor （SMBR） treating brewery wastewater were investigated in this study. With little variation of COD：TN：TP ratio （100：5：1） in influent, SMBR showed high removal efficiency （ 〉 90% ） for both COD and NH4^＋ - N, and it also showed a strong resistive ability for shock organics loading rate, evidenced by no obvious fluctuation for COD in the effluent when the organics loading rate suddenly increased from 0. 27 g/（ gMLSS · d） to 0. 54 g/（ gMLSS · d）. Comparatively different with the COD removal, TN and TP removal showed a strong correlation with the growth stage of the sludge in SMBR. When the sludge was in the multiplication stage, about 45% of TN was removed and an average removal efficiency of 30% for TP was also observed. However, when the activated sludge was in the steady stage, the removal efficiency for TN decreased to about 30% , whereas, the removal efficiency for TP was very low, and sometimes even below zero. The results of GC/MS indicated that the residual organic matters in the effluent were mainly alkyl hydrocarbon with high molecular weight, and coupling with the results of electroseopic scanning, it is speculated that biomass formed at external and internal membrane fibers played an important role for the removal of small organics.
基金Supported by the funding from "135" Projects Fund of CAS-QIBEBT Director Innovation FoundationThink-Tank Mutual Fund of Qingdao Energy Storage Industry Scientific Research+3 种基金Qingdao Key Lab of Solar Energy Utilization and Energy Storage Technologythe Strategic Priority Research Program of the Chinese Academy of Sciences(XDA09010105)National Natural Science Foundation of China(51502319)Shandong Provincial Natural Science Foundation(ZR2016BQ18)
文摘In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.
基金Supported by Chinese National Science Fund for Creative Research Groups (No.60521002)Chinese National Key Technology R&D Program(No.2005BA908B02)Science Foundation of Shanghai Municipal Commission of Science and Technology (No.05dz05802) .
文摘In relay cellular network, relay links will consume extra frequency resources, which makes radio resource allocation become more complex and important. A new frequency allocation scheme is proposed to increase cell capacity and improve signal-to-interference ratio (SIR) of users located at cell edges. By dividing cell into different parts and configuring each of these parts with a unique reuse factor, this scheme improves spectral utilization efficiency and avoids inter-cell interference effectively. Optimal combinations of reuse factors and locations of relay nodes are also addressed and investigated. Computer simulation results show that, by employing the proposed scheme, maximum cell capacity gains of about 50%, 35% and 30% can be achieved in comparison with conventional cellular network scheme, traditional reuse partitioning scheme and reuse-adjacent-cell-frequencies scheme, respectively. Moreover, since in the proposed scheme resources are dynamically allocated among relay nodes, more benefits can be obtained in comparison with fixed resource allocation schemes under non-uniform traffic distribution.
文摘A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequencies are equal to those for switching off electric resistances. This paper analyzes and determines systemnatural frequencies based on a modeling method of receptances with the analysis of sub-systems model and of theprinciple of their addition and conveyor loop closure. It also puts forward to calculate the time interval for switching off electric resistances. The starting of one conveyor is simulated by lumped-mass-spring-model software tofurther illustrate the influence of time interval for switching off electric resistances on conveyor dynamic behavior. Two methods are also compared. The receptance model is proved to be an excellent alternative.
文摘PU （polyurethane） integral skin and PVC （polyvinyl chloride） are polymeric materials which have favorable physical characteristics to reduce the impact noise when applied to floor systems. In civil construction, floating floors systems are composed of two layers above the slab： a resilient layer and, above this, a rigid layer of cement matrix that works as a subfloor. This research aims to evaluate the incorporation of PVC and PU skin waste in the resilient layer of the floating floor, for impact noise insulation. It was conducted physical, mechanical and morphological tests in the composite, as SEM （scanning electron microscopy）, determination of compressive creep, and impact noise test to evaluate the absorption capacity of the floor system over time. Furthermore, experimental results were compared with theoretical studies. These correlations may assist in understanding the behavior of impact noise damping and its relation to the size of the samples.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.11179038,10974073)the Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20120211130005)the Fundamental Research Funds for the Central Universities(Grant No.2022012zr0036)
文摘The properties of piezoelectric PVDF films as separators are studied in NiO/Li electrodes Li-ion power cell.The results show that the PVDF piezoelectric film with excellent insulation is suitable for the environmental energy harvesting application.This is attributable to the compact structure of the piezoelectric PVDF film,and which make it has low leakage current and low charge-discharge current characteristics.
