In coking process, the production quality, equipment life, energy consumption, and process safety are all influenced by the pressure in gas collector pipe of coke oven, which is frequently influenced by disturbances.T...In coking process, the production quality, equipment life, energy consumption, and process safety are all influenced by the pressure in gas collector pipe of coke oven, which is frequently influenced by disturbances.The main control objectives for the gas collector pressure system are keeping the pressures in collector pipes at appropriate operating point. In this paper, model predictive control(MPC) strategy is introduced to control the collector pressure system due to its ability to handle constraint and good control performance. Based on a method proposed to simplify the system model, an extended state space model predictive control is designed,which combines the feedforward strategy to eliminate the disturbance. The simulation results in a system with two coke ovens show the feasibility and effectiveness of the control scheme.展开更多
Three Dimensional Finite Element Method(3D-FEM)has been used to model the deviatoric stress field in a forsterite aggregate with a sandwich geometry:two forsterite cubes aligned in the same crystallographic orientatio...Three Dimensional Finite Element Method(3D-FEM)has been used to model the deviatoric stress field in a forsterite aggregate with a sandwich geometry:two forsterite cubes aligned in the same crystallographic orientation(the"breads")sandwich a third forsterite cube(the"filling"),which might have an identical or different crystallographic orientation.The results show that there is no von Mises stress in the forsterite sandwich if the sandwiching and sandwiched forsterite cubes are aligned in the same crystallographic orientation.If the crystallographic orientations are different,however,von Mises stress and heterogeneous stress distribution occur both along the boundary and in the forsterite cubes.For the investigated P-T conditions(up to 6.4GPa and 500°C),the resulted deviatoric stress is much lower than the yield strength of forsterite,so that higher P,higher T,or other means to create higher deviatoric stress is necessary,in order to constrain the yielding behavior of forsterite.展开更多
A new method of measuring gas pressure in vacuum insulation panels(VIPs)is reported in this study,which provides a fast and efficient quality control option of production.Although there are different methods of measur...A new method of measuring gas pressure in vacuum insulation panels(VIPs)is reported in this study,which provides a fast and efficient quality control option of production.Although there are different methods of measuring gas pressure for VIPs,connecting an internal measurement gauge to external data acquisition units is problematic.The thin high barrier film covering the panel’s core usually prevents external electrical wires or mechanical devices being connected to the inside of the VIPs.To solve this problem,a micro capacitive pressure sensor with 0 to 250 Pa detection range is developed to detect the vacuum pressure.The sensor has high linearity and a sensitivity of 10 mV/Pa.Moreover,through the communication mode study,an ultrasound communications system for VIPs is designed.It shows from operation that this system is stable and reliable,and quick for communication speed.This new method enables the quality detection of VIPs to be completed within 1 second.The minimum detectable pressure of VIPs is below 1 Pa,and the measurement error can be controlled around 5%.展开更多
基金Supported by the State Key Laboratory of Synthetical Automation for Process Industriesthe National Natural Science Foundation of China(61374110,61333009,61104078,61221003)the Minhang Technology Project of Shanghai(2012MH211)
文摘In coking process, the production quality, equipment life, energy consumption, and process safety are all influenced by the pressure in gas collector pipe of coke oven, which is frequently influenced by disturbances.The main control objectives for the gas collector pressure system are keeping the pressures in collector pipes at appropriate operating point. In this paper, model predictive control(MPC) strategy is introduced to control the collector pressure system due to its ability to handle constraint and good control performance. Based on a method proposed to simplify the system model, an extended state space model predictive control is designed,which combines the feedforward strategy to eliminate the disturbance. The simulation results in a system with two coke ovens show the feasibility and effectiveness of the control scheme.
基金supported by National Natural Science Foundation of China(Grant No.41090371)
文摘Three Dimensional Finite Element Method(3D-FEM)has been used to model the deviatoric stress field in a forsterite aggregate with a sandwich geometry:two forsterite cubes aligned in the same crystallographic orientation(the"breads")sandwich a third forsterite cube(the"filling"),which might have an identical or different crystallographic orientation.The results show that there is no von Mises stress in the forsterite sandwich if the sandwiching and sandwiched forsterite cubes are aligned in the same crystallographic orientation.If the crystallographic orientations are different,however,von Mises stress and heterogeneous stress distribution occur both along the boundary and in the forsterite cubes.For the investigated P-T conditions(up to 6.4GPa and 500°C),the resulted deviatoric stress is much lower than the yield strength of forsterite,so that higher P,higher T,or other means to create higher deviatoric stress is necessary,in order to constrain the yielding behavior of forsterite.
基金supported by the Science and Technology Projects of Fujian Province of China(Grant No.2010H6025)Science and Technology Projects of Xiamen City of China(Grant No.3502Z20103012)
文摘A new method of measuring gas pressure in vacuum insulation panels(VIPs)is reported in this study,which provides a fast and efficient quality control option of production.Although there are different methods of measuring gas pressure for VIPs,connecting an internal measurement gauge to external data acquisition units is problematic.The thin high barrier film covering the panel’s core usually prevents external electrical wires or mechanical devices being connected to the inside of the VIPs.To solve this problem,a micro capacitive pressure sensor with 0 to 250 Pa detection range is developed to detect the vacuum pressure.The sensor has high linearity and a sensitivity of 10 mV/Pa.Moreover,through the communication mode study,an ultrasound communications system for VIPs is designed.It shows from operation that this system is stable and reliable,and quick for communication speed.This new method enables the quality detection of VIPs to be completed within 1 second.The minimum detectable pressure of VIPs is below 1 Pa,and the measurement error can be controlled around 5%.
