新干线高速化中的集电技术

新干线车辆高速下的集电性能与受电弓和架线两者紧密相关。日本铁道总研院为改善高速受电弓的动态特性和提高架线的横波传播速度C,进行了相关的研究试验,取得了有效成果。但对于时速300km以上的集电问题尚有大量的技术有待开发。

集肤效应电伴热技术在港口输油管道工程中的应用

文章介绍了集肤效应电伴热技术的原理、特点以及在港口输油管线建设中的应用,较好地解决了中长距离输送管道的加热问题。

集肤效应电伴热技术的应用

叙述了集肤效应电伴热技术的基本原理、集肤效应伴热装置的基本构成和技术特点及其工程计算方法 。

高温超导单极电机关键技术

阐述了高温超导单极电机的主要技术关键及解决途径 ,着重阐述与目前高温超导材料特性相适应的高温超导磁体技术 。

A Novel CMOSDual-Modulus Prescaler Based on New Optimized Structure and Dynamic Circuit Technique

s:A divide- by- 12 8/ 12 9or6 4/ 6 5 dual- modulus prescaler based on new optimized structure and dynam ic circuit technique im plem ented in 0 .2 5 μm CMOS digital technology is described.New optimized structure reduces the propagation delay and has higher operating speed.Based on this structure,an im proved D- flip- flop(DFF) using dynam ic circuit technique is proposed.A prototype is fabricated and the measured results show that this prescaler works well in gigahertz frequency range and consumes only35 m W(including three power- hungry output buffers) when the input frequency is2 .5 GHz and the power supply voltage is2 .5 V.Due to its excellent perform ance,the prescaler could be applied to many RF system s.

Mathematical model analysis of new-type magnetic integrated CRT considering magnetic leakage

A novel magnetic integrated controllable reactor of transformer type(CRT)has the advantages of simple structure,flexible assembly,convenient maintenance and practicability.To analyze its operation characteristics accurately,we establish corresponding equivalent mathematical model considering magnetic leakage based on magnetic circuit and circuit dualistic transformation method.The distribution of magnetic leakage field of each winding is analyzed qualitatively,and the analytical calculation formulas of magnetizing inductance and leakage inductance of each winding are derived.Based on this,the analytical calculation formulas of short-circuit impedance and winding current of CRT under different working conditions are derived.The field-circuit coupling finite element model of the magnetic integrated CRT is established to simulate the current of each winding under different working conditions.The results show that the analytical calculation results of each winding current have good consistency with the finite element calculation results,indicating the validity of CRT equivalent mathematical model and correctness of the analytical formulas of leakage inductance,short-circuit impedance and winding current of CRT.The working winding current of CRT is increasing gradually with the operation of control winding in turn to realise the transition of CRT compensation capacity from zero to a rated value.

Opportunities from ICT for Agro-Food Supply Chains

Nowadays the situation of agro-food and rural sector in terms of markets, development and competitiveness and the specific impact that rural activities have in the society, added to the potential positive impact of new ICT technologies, has arisen new challenges. Support the European Agro-food industry to be a worldwide leader in the supply of high quality and safe food products. The relevance of agro-food industry is not only related to its importance in European economy but also is consequence of increase awareness concerning to the necessity of producing high quality and safe products. The implementation of the new technologies in agro-food domain, enabling adequate combination of traditional products and modern management processes will definitively contribute to produce high quality and safe products. Increase the level of involvement of consumers in the agro-food value chain by means of the wide adoption of relevant IC Technologies and applications. The agro-food sector is very much a consumer driven sector. However, in order to realise the full participation of citizens in the whole agro-food supply chain, further developments in ICTs are required. The incorporation of ICT tools will greatly contribute to achieving a deeper integration, communication and information flow between the different stakeholders in the supply chain, from ＂fork to farm＂, from farmers to consumers. Therefore, in first place the objective of the work is to analyze the opportunities offered by the ICT to implement the systems of traceability in the food system. In according to place the study wants to deepen the norm ISO22000, in which the ICT has a fundamental role to have a synthetic tool of guarantee and greater trust for the consumer. The purpose is to make a critical review of the existing literature on this matter in relationship to the agro-food systems.

Research on the Natural Image Classification and Segmentation Algorithm based on GPU and Neural Network

In this paper, we conduct research on the natural image classification and segmentation algorithm based on GPU and neural network. The application of image segmentation is very broad, almost appeared in all areas related to image processing, and involved in various types. With the fast development of computing technology and integrated circuit technology, the renewal speed of graphics hardware. Our method combines the GPU with network to optimize the traditional image segmentation and classification methods which will be meaningful. In the future, we will focus our attention on the hardware deployment of the GPU to modify the current approach.

An Integrated Tool for Power/Ground Network Design, Optimization,and Verification for Cell Based VLSIs

A CAD tool based on a group of efficient algorithms to verify,design,and optimize power/ground networks for standard cell model is presented.Nonlinear programming techniques,branch and bound algorithms and incomplete Cholesky decomposition conjugate gradient method (ICCG) are the three main parts of our work.Users can choose nonlinear programming method or branch and bound algorithm to satisfy their different requirements of precision and speed.The experimental results prove that the algorithms can run very fast with lower wiring resources consumption.As a result,the CAD tool based on these algorithms is able to cope with large-scale circuits.

Highly-compliant,conformal and stretchable microelectrode arrays

Most biological tissues are supple and elastic, while current electronic devices fabricated by semiconductors and metals are usually stiff and brittle. As a result, implanted electronic devices can irritate and damage surrounding tissues, causing immune reaction and scarring. In this work, we develop stretchable microelectrode arrays, with the development of a novel soft lithography technology, which are designed and fabricated with a polymer/stretchable metal/polymer sandwich structure. With the great deformability of stretch, compression, bend and twisting, while preserving electrical property, this technology overcomes the fundamental mismatch of mechanical properties between biological tissues and electronic devices, and provides highly-compliant, confonnal and stretchable bio-electronic interfaces. Here we also describe the following three applications of the stretchable electrode arrays： a. monitoring intracranial electroencephalography （EEG）; b. stimulating peripheral nerves to drive muscles; c. monitoring epicardial electrocardiography （ECG）. Stretchable microelectrode arrays create a promising field in biomedical applications for its better modulus match with biological tissues and robust mechanical and electrical properties. They allow for construction of electronic integrated circuits spread over on complex and dynamic curved surfaces, providing a much friendlier bio-electronic interface for diagnosis, treatment and in- telligent bio-control.

Simulation Studies of an Integrated Overcurrent Relay Protection Scheme for Distribution Systems

This paper presents an integrated protection technique for power distribution systems. A novel integrated protection scheme based on overcurrent protection technique for distribution system is described, in which a specially designed protection relay is installed at each substation of a network and responsible for the protection of every line sections connected to the substation busbar The conventional directional overcurrent and the new adaptive accelerated protection algorithms with multiple settings are implemented into the relay to cover all the protected line sections. The paper includes studies of a typical multi section distribution network to demonstrate the principle of the scheme. Studies show that the new scheme not only offer the new protection features for individual power line section, but also provide the characteristics of integrated protection.

Research on the On-line Monitoring System of Battery Power

Through the comparison of various acquisition technology and related technology theory of the existing scheme, the paper analyze and design the power battery testing platform of the data acquisition system, and give the research design scheme of the utility model through the design of the software on PC and CAN bus, which makes the full synchronization requirements acquisition unit; improve the linearity and stability of total voltage and current acquisition by the integrated circuit, and improve the system sampling rate, effectively complete the corresponding index. Finally, through experimental verification, to ensure the completion of the technical indicators.

Photochemical Method to Evaluate Oxidation Levels in Heat-Treated Vegetable Oil： Comparison with Peroxide-Value and Acid-Value

To determine the degree of oxidation in vegetable oil, a photochemical method using the electron spin resonance （ESR） spin trapping technique was developed, and the results were compared with those obtained using conventional peroxide-value （PV） and acid-value （AV） methods. Vegetable oil heat-treated were subjected to short UV illumination, and the produced alkyl-oxyl radicals were identified and quantified using the ESR spin trapping technique. ESR signal intensity was used as an indicator of oil oxidation, which monotonically increased as a function of the heat-treatment time. Commercially, available oils were selected and analyzed. The results were compared with those obtained using the PV and AV methods. The present method displayed some analogies with the PV method at least in the early stage of heating. Overall, the present method had highly sensitive and capable of detecting early-stage oxidation in vegetable oil.

Nozzle Light Powered by Energy Harvesting Technology

The invention of this study harvests a portion of hydropower in the fire hose to drive a micro turbine generator and the electric power generated is used to light the LED （light-emitting diode） attached on the fire nozzle for the illumination of dark scene （it is called nozzle light in this study）. The simulation and experiment are done to match the design of nozzle light. Nozzle light provides firefighters a synergistic function to spray the water and illuminate the fire field at the same time without requiring any extra hand to handle the light. It indeed increases both the efficiency of putting off a fire and the safety of firefighters. The most innovative benefit is that neither heavy battery nor utility wires are needed to get the lighting.

Log integration on large scale for global networking monitoring

Supposing that the overall situation is dug out from the distributed monitoring nodes, there should be two critical obstacles, heterogenous schema and instance, to integrating heterogeneous data from different monitoring sensors. To tackle the challenge of heterogenous schema, an instance-based approach for schema mapping, named instance-based machine-learning （IML） approach was described. And to solve the problem of heterogenous instance, a novel approach, called statistic-based clustering （SBC） approach, which utilized clustering and statistics technologies to match large scale sources holistically, was also proposed. These two algorithms utilized the machine-leaning and clustering technology to improve the accuracy. Experimental analysis shows that the IML approach is more precise than SBC approach, reaching at least precision of 81% and recall rate of 82%. Simulation studies further show that SBC can tackle large scale sources holisticalty with 85% recall rate when there are 38 data sources.

Low Leakage Power Sequential Circuits Using Multi-Vth at Nano-Scale Transistor

Leakage power is the dominant source of power dissipation for Sub-100 nm VLSI （very large scale integration） circuits. Various techniques were proposed to reduce the leakage power at nano-scale; one of these techniques is MTV （multi-threshold voltage） In this paper, the exact and optimal value of threshold voltage （Vth） for each transistor in any sequential circuit in the design is found, so that the value of the total leakage current in the design is at the minimum. This could be achieved by applying AI （artificial intelligence） search algorithm. The proposed algorithm is called LOAIS （leakage optimization using AI search）. LOAIS exploits the total slack time of each transistor＇s location and their contributions in the leakage current. It is introduced by AI heuristic search algorithms under 22 nm BSIM4 predictive technology model. The proposed approach saves around 80% of the sub-threshold leakage current without degrading the performance of the circuit.

Integration of micro-supercapacitors with triboelectric nanogenerators for a flexible self-charging power unit

The rapid development of portable and wearable electronic devices has increased demand for flexible and efficient energy harvesting and storage units. Conventionally, these are built and used separately as discrete components. Herein, we propose a simple and cost-effective laser engraving technique for fabricating a flexible self-charging micro-supercapacitor power unit （SCMPU）, by integrating a triboelectric nanogenerator （TENG） and a micro-supercapacitor （MSC） array into a single device. The SCMPU can be charged directly by ambient mechanical motion. We demonstrate the ability of the SCMPU to continuously power light-emitting diodes and a commercial hygrothermograph. This inves- tigation may promote the development of sustainable self-powered systems and provide a promising new research application for supercapacitors.