Base on the theory of energy minimization, a numerical algorithm is established to calculate load distribution, and the relationship curve of spur gear load distribution is obtained, and the load distribution ratio ch...Base on the theory of energy minimization, a numerical algorithm is established to calculate load distribution, and the relationship curve of spur gear load distribution is obtained, and the load distribution ratio changes from 033 to 067 in double contact zone. This theory is adopted to compute the load distribution of helical gear along time-varying contact line, and the load distribution varies with the instantaneous position of the meshing point and the length of contact line, and the maximum value of load appears at the pitch point. Compared with the load distribution results, the helical gear changes more smoothly than spur gear. The load distribution provides a basis for calculate tooth bending deformation and critical stress.展开更多
A hierarchical scheme of feature-based model similarity measurement was proposed,named CSG_D2,in which both geometry similarity and topology similarity were applied.The features of 3D mechanical part were constructed ...A hierarchical scheme of feature-based model similarity measurement was proposed,named CSG_D2,in which both geometry similarity and topology similarity were applied.The features of 3D mechanical part were constructed by a series of primitive features with tree structure,as a form of constructive solid geometry(CSG) tree.The D2 shape distributions of these features were extracted for geometry similarity measurement,and the pose vector and non-disappeared proportion of each leaf node were gained for topology similarity measurement.Based on these,the dissimilarity between the query and the candidate was accessed by level-by-level CSG tree comparisons.With the adjustable weights,our scheme satisfies different comparison emphasis on the geometry or topology similarity.The assessment results from CSG_D2 demonstrate more discriminative than those from D2 in the analysis of precision-recall and similarity matrix.Finally,an experimental search engine is applied for mechanical parts reuse by using CSG_D2,which is convenient for the mechanical design process.展开更多
The venom apparatus in the large carpenter bees, Xylocopafenestrata （Fabricius） （Hymenoptera： Apidae） has been studied It consists of typical parts, i.e., the venom sac, free filament, Dufour gland, sting shaft a...The venom apparatus in the large carpenter bees, Xylocopafenestrata （Fabricius） （Hymenoptera： Apidae） has been studied It consists of typical parts, i.e., the venom sac, free filament, Dufour gland, sting shaft and accessory sclerites. It is highly sclerotized and concealed by the 7th abdominal tergite and sternite. The venom sac serves as a reservoir for the venom which synthesized by the convoluted gland present in it, which is remarkably uniform to that of ants. The median duct extends from lower portion of venom sac, which measures 2.5 ±0.17 mm （mean ＋ SD） （n = 20） in length. The Dufour gland is a tube-like structure which is inserted in the sting-bulb. The triangular plate is attached at terminal portion of rami, which is in turn attached with lancets. The gonostyli are paired long and tubular structure with 5.29 ± 0.23 mm （n = 20） in length. The sting length is 5.29 ±0.23 mm （n = 20）. The fulcral arm is well-developed with an inverse Y-shaped structure present beneath the sting-bulb. Barbs on the sting shaft are weakly developed in X fenestrata but well developed in ants. The venom apparatus ofX. fenestrata when compared is similar to the bees but differs from that of the wasps and ants.展开更多
Thermal barrier coatings （TBC） have been improved for the engine applications. During working process of the engine, components were subjected to thermal stresses. For simulating thermally stressed engine parts, dis...Thermal barrier coatings （TBC） have been improved for the engine applications. During working process of the engine, components were subjected to thermal stresses. For simulating thermally stressed engine parts, disc specimen was objected to airflow at the temperatures about 1,000℃. In this study, finite element structural and thermal analyses were carried out on both uncoated （without coating） and ceramic-coated disc specimen using ANSYS code. A 150 micron super alloy bond coating （NiCrAIY） was first applied to the specimen. Then, the disc specimen was covered by 350 micron thickness of Mullit （3Al2O3.2SiO2） as a top coating. These analysis were performed for detecting the possible thermally problem areas. The disc＇s thermal stressed problematic areas were determined by the finite element analysis was helpful for improving the geometry and TBC.展开更多
This paper constructs a polyconvex stored energy function, satisfying the null condition, for isotropic compressible elastic materials with given Lame constants. The difference between this stored energy function and ...This paper constructs a polyconvex stored energy function, satisfying the null condition, for isotropic compressible elastic materials with given Lame constants. The difference between this stored energy function and St Venant-Kirchhoff's is a three order term.展开更多
基金Sponsored by the Eleventh Five-years Drive for Basic Research Project
文摘Base on the theory of energy minimization, a numerical algorithm is established to calculate load distribution, and the relationship curve of spur gear load distribution is obtained, and the load distribution ratio changes from 033 to 067 in double contact zone. This theory is adopted to compute the load distribution of helical gear along time-varying contact line, and the load distribution varies with the instantaneous position of the meshing point and the length of contact line, and the maximum value of load appears at the pitch point. Compared with the load distribution results, the helical gear changes more smoothly than spur gear. The load distribution provides a basis for calculate tooth bending deformation and critical stress.
基金Project(51175287)supported by the National Natural Science Foundation of ChinaProject(2006AA04Z112)supported by National High Technology Research and Development Program of China
文摘A hierarchical scheme of feature-based model similarity measurement was proposed,named CSG_D2,in which both geometry similarity and topology similarity were applied.The features of 3D mechanical part were constructed by a series of primitive features with tree structure,as a form of constructive solid geometry(CSG) tree.The D2 shape distributions of these features were extracted for geometry similarity measurement,and the pose vector and non-disappeared proportion of each leaf node were gained for topology similarity measurement.Based on these,the dissimilarity between the query and the candidate was accessed by level-by-level CSG tree comparisons.With the adjustable weights,our scheme satisfies different comparison emphasis on the geometry or topology similarity.The assessment results from CSG_D2 demonstrate more discriminative than those from D2 in the analysis of precision-recall and similarity matrix.Finally,an experimental search engine is applied for mechanical parts reuse by using CSG_D2,which is convenient for the mechanical design process.
文摘The venom apparatus in the large carpenter bees, Xylocopafenestrata （Fabricius） （Hymenoptera： Apidae） has been studied It consists of typical parts, i.e., the venom sac, free filament, Dufour gland, sting shaft and accessory sclerites. It is highly sclerotized and concealed by the 7th abdominal tergite and sternite. The venom sac serves as a reservoir for the venom which synthesized by the convoluted gland present in it, which is remarkably uniform to that of ants. The median duct extends from lower portion of venom sac, which measures 2.5 ±0.17 mm （mean ＋ SD） （n = 20） in length. The Dufour gland is a tube-like structure which is inserted in the sting-bulb. The triangular plate is attached at terminal portion of rami, which is in turn attached with lancets. The gonostyli are paired long and tubular structure with 5.29 ± 0.23 mm （n = 20） in length. The sting length is 5.29 ±0.23 mm （n = 20）. The fulcral arm is well-developed with an inverse Y-shaped structure present beneath the sting-bulb. Barbs on the sting shaft are weakly developed in X fenestrata but well developed in ants. The venom apparatus ofX. fenestrata when compared is similar to the bees but differs from that of the wasps and ants.
文摘Thermal barrier coatings （TBC） have been improved for the engine applications. During working process of the engine, components were subjected to thermal stresses. For simulating thermally stressed engine parts, disc specimen was objected to airflow at the temperatures about 1,000℃. In this study, finite element structural and thermal analyses were carried out on both uncoated （without coating） and ceramic-coated disc specimen using ANSYS code. A 150 micron super alloy bond coating （NiCrAIY） was first applied to the specimen. Then, the disc specimen was covered by 350 micron thickness of Mullit （3Al2O3.2SiO2） as a top coating. These analysis were performed for detecting the possible thermally problem areas. The disc＇s thermal stressed problematic areas were determined by the finite element analysis was helpful for improving the geometry and TBC.
基金Project supported by the National Natural Science of Foundation of China (No. 19871015)
文摘This paper constructs a polyconvex stored energy function, satisfying the null condition, for isotropic compressible elastic materials with given Lame constants. The difference between this stored energy function and St Venant-Kirchhoff's is a three order term.
