Avalanche photodiodes(APDs) are promising light sensors with high quantum efficiency and low noise. It has been extensively used in radiation detection,laser radar and other weak signal detection fields. Unlike other ...Avalanche photodiodes(APDs) are promising light sensors with high quantum efficiency and low noise. It has been extensively used in radiation detection,laser radar and other weak signal detection fields. Unlike other photodiodes,APD is a very sensitive light detector with very high internal gain. The basic theory shows that the gain of APD is related to the temperature. The internal gain fluctuates with the variation of temperature. Investigated was the influence of the variation of the gain induced by the fluctuation of temperature on the output from APD for a very weak laser pulse input in laser radar. An active reverse-biased voltage compensation method is used to stabilize the gain of APD. An APD model is setup to simulate the detection of light pulse signal. The avalanche process,various noises and temperature's effect are all included in the model. Our results show that for the detection of weak light signal such as in laser radar,even a very small fluctuation of temperature could cause a great effect on APD's gain. The results show that the signal-to-noise ratio of the APD's output could be improved effectively with the active gain-control system.展开更多
This paper presented an automatic gain control （AGC） circuit suitable for FM/cw ladar. The proposed architecture was based on two-stage variable gain amplifier （VGA） chain with a novel DC offset canceller circuit,...This paper presented an automatic gain control （AGC） circuit suitable for FM/cw ladar. The proposed architecture was based on two-stage variable gain amplifier （VGA） chain with a novel DC offset canceller circuit, which contained an improved Gilbert cell and a Gm-C feedback loop. To keep the VGA with a linearity in dB characteristic, an improved exponential gain control circuit was introduced. The AGC was implemented in 0.18 gm standard CMOS process. Simulation and measurement results verified that its gain ranged from -20 dB to 30 dB, and band- width ranged from 100 kHz to 10 MHz. Its power consumption was 19.8 mW under a voltage supply of 3.3 V.展开更多
基金Young Scientist Research Fund of Heilongjiang University(QL200508)
文摘Avalanche photodiodes(APDs) are promising light sensors with high quantum efficiency and low noise. It has been extensively used in radiation detection,laser radar and other weak signal detection fields. Unlike other photodiodes,APD is a very sensitive light detector with very high internal gain. The basic theory shows that the gain of APD is related to the temperature. The internal gain fluctuates with the variation of temperature. Investigated was the influence of the variation of the gain induced by the fluctuation of temperature on the output from APD for a very weak laser pulse input in laser radar. An active reverse-biased voltage compensation method is used to stabilize the gain of APD. An APD model is setup to simulate the detection of light pulse signal. The avalanche process,various noises and temperature's effect are all included in the model. Our results show that for the detection of weak light signal such as in laser radar,even a very small fluctuation of temperature could cause a great effect on APD's gain. The results show that the signal-to-noise ratio of the APD's output could be improved effectively with the active gain-control system.
基金Supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2012ZX03004008)
文摘This paper presented an automatic gain control （AGC） circuit suitable for FM/cw ladar. The proposed architecture was based on two-stage variable gain amplifier （VGA） chain with a novel DC offset canceller circuit, which contained an improved Gilbert cell and a Gm-C feedback loop. To keep the VGA with a linearity in dB characteristic, an improved exponential gain control circuit was introduced. The AGC was implemented in 0.18 gm standard CMOS process. Simulation and measurement results verified that its gain ranged from -20 dB to 30 dB, and band- width ranged from 100 kHz to 10 MHz. Its power consumption was 19.8 mW under a voltage supply of 3.3 V.
